[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI 2.2 present.
[    0.000000] DMI: FUJITSU SIEMENS A8NE-FM/A8NE-FM, BIOS FUJITSU SIEMENS A8NE-FM 1011 06/06/2006
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f5250] f5250
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 3677e000 - 373b7000
[    0.000000] ACPI: RSDP 000f7160 00014 (v00 Nvidia)
[    0.000000] ACPI: RSDT 3fff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 3fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 3fff3180 05CD9 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 3fff0000 00040
[    0.000000] ACPI: SSDT 3fff8f80 000F7 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: MCFG 3fff90c0 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 3fff8ec0 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262015
[    0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f5f7e200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 272 pages used for memmap
[    0.000000]   HighMem zone: 34530 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f5800000 s28800 r0 d24448 u2097152
[    0.000000] pcpu-alloc: s28800 r0 d24448 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=430053c5-c285-44fb-ac0a-676d13913013 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5242240 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[    0.000000] Memory: 1011936k/1048512k available (5188k kernel code, 36124k reserved, 2540k data, 700k init, 139208k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc178d000 - 0xc183c000   ( 700 kB)
[    0.000000]       .data : 0xc15112a1 - 0xc178c480   (2540 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15112a1   (5188 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2211.319 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4422.63 BogoMIPS (lpj=8845276)
[    0.004013] pid_max: default: 32768 minimum: 301
[    0.004043] Security Framework initialized
[    0.004071] AppArmor: AppArmor initialized
[    0.004074] Yama: becoming mindful.
[    0.004145] Mount-cache hash table entries: 512
[    0.004304] Initializing cgroup subsys ns
[    0.004308] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.004313] Initializing cgroup subsys cpuacct
[    0.004318] Initializing cgroup subsys memory
[    0.004329] Initializing cgroup subsys devices
[    0.004332] Initializing cgroup subsys freezer
[    0.004335] Initializing cgroup subsys net_cls
[    0.004338] Initializing cgroup subsys blkio
[    0.004375] mce: CPU supports 5 MCE banks
[    0.004954] SMP alternatives: switching to UP code
[    0.013309] ACPI: Core revision 20110112
[    0.020014] ftrace: allocating 23640 entries in 47 pages
[    0.024083] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.024391] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.032001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.032001] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.032001] ..... (found apic 0 pin 0) ...
[    0.040002] ....... failed.
[    0.040002] ...trying to set up timer as Virtual Wire IRQ...
[    0.040002] ..... failed.
[    0.040002] ...trying to set up timer as ExtINT IRQ...
[    0.080751] ..... works.
[    0.080753] CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 01
[    0.084004] Performance Events: AMD PMU driver.
[    0.084004] ... version:                0
[    0.084004] ... bit width:              48
[    0.084004] ... generic registers:      4
[    0.084004] ... value mask:             0000ffffffffffff
[    0.084004] ... max period:             00007fffffffffff
[    0.084004] ... fixed-purpose events:   0
[    0.084004] ... event mask:             000000000000000f
[    0.084004] Brought up 1 CPUs
[    0.084004] Total of 1 processors activated (4422.63 BogoMIPS).
[    0.084004] devtmpfs: initialized
[    0.084004] print_constraints: dummy: 
[    0.084004] Time: 21:48:59  Date: 05/18/11
[    0.084004] NET: Registered protocol family 16
[    0.084004] EISA bus registered
[    0.084004] node 0 link 0: io port [1000, fffff]
[    0.084004] TOM: 0000000040000000 aka 1024M
[    0.084004] node 0 link 0: mmio [e0000000, efffffff]
[    0.084004] node 0 link 0: mmio [feb00000, fec0ffff]
[    0.084004] node 0 link 0: mmio [a0000, bffff]
[    0.084004] node 0 link 0: mmio [40000000, fed3ffff]
[    0.084004] bus: [00, ff] on node 0 link 0
[    0.084004] bus: 00 index 0 [io  0x0000-0xffff]
[    0.084004] bus: 00 index 1 [mem 0x40000000-0xffffffff]
[    0.084004] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff]
[    0.084004] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[    0.084004] ACPI: bus type pci registered
[    0.084004] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.084004] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.084004] PCI: Using MMCONFIG for extended config space
[    0.084004] PCI: Using configuration type 1 for base access
[    0.084004] bio: create slab <bio-0> at 0
[    0.084863] ACPI: EC: Look up EC in DSDT
[    0.089430] ACPI: Interpreter enabled
[    0.089435] ACPI: (supports S0 S3 S4 S5)
[    0.089453] ACPI: Using IOAPIC for interrupt routing
[    0.094516] ACPI: No dock devices found.
[    0.094518] HEST: Table not found.
[    0.094521] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.094572] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.094671] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.094674] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.094677] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.094679] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.094682] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.094697] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[    0.094757] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
[    0.094778] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.094789] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[    0.094796] pci 0000:00:01.1: reg 10: [io  0xe400-0xe41f]
[    0.094808] pci 0000:00:01.1: reg 20: [io  0x4c00-0x4c3f]
[    0.094813] pci 0000:00:01.1: reg 24: [io  0x4c40-0x4c7f]
[    0.094824] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.094828] pci 0000:00:01.1: PME# disabled
[    0.094841] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[    0.094849] pci 0000:00:02.0: reg 10: [mem 0xd8104000-0xd8104fff]
[    0.094871] pci 0000:00:02.0: supports D1 D2
[    0.094874] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094877] pci 0000:00:02.0: PME# disabled
[    0.094887] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[    0.094896] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
[    0.094922] pci 0000:00:02.1: supports D1 D2
[    0.094924] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094927] pci 0000:00:02.1: PME# disabled
[    0.094943] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
[    0.094950] pci 0000:00:04.0: reg 10: [io  0xdc00-0xdcff]
[    0.094955] pci 0000:00:04.0: reg 14: [io  0xe000-0xe0ff]
[    0.094960] pci 0000:00:04.0: reg 18: [mem 0xd8103000-0xd8103fff]
[    0.094977] pci 0000:00:04.0: supports D1 D2
[    0.094987] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
[    0.095004] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    0.095024] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
[    0.095031] pci 0000:00:07.0: reg 10: [io  0x09f0-0x09f7]
[    0.095036] pci 0000:00:07.0: reg 14: [io  0x0bf0-0x0bf3]
[    0.095040] pci 0000:00:07.0: reg 18: [io  0x0970-0x0977]
[    0.095045] pci 0000:00:07.0: reg 1c: [io  0x0b70-0x0b73]
[    0.095050] pci 0000:00:07.0: reg 20: [io  0xd800-0xd80f]
[    0.095055] pci 0000:00:07.0: reg 24: [mem 0xd8102000-0xd8102fff]
[    0.095072] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
[    0.095080] pci 0000:00:08.0: reg 10: [io  0x09e0-0x09e7]
[    0.095084] pci 0000:00:08.0: reg 14: [io  0x0be0-0x0be3]
[    0.095089] pci 0000:00:08.0: reg 18: [io  0x0960-0x0967]
[    0.095094] pci 0000:00:08.0: reg 1c: [io  0x0b60-0x0b63]
[    0.095099] pci 0000:00:08.0: reg 20: [io  0xc400-0xc40f]
[    0.095103] pci 0000:00:08.0: reg 24: [mem 0xd8101000-0xd8101fff]
[    0.095120] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[    0.095137] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
[    0.095145] pci 0000:00:0a.0: reg 10: [mem 0xd8100000-0xd8100fff]
[    0.095150] pci 0000:00:0a.0: reg 14: [io  0xb000-0xb007]
[    0.095170] pci 0000:00:0a.0: supports D1 D2
[    0.095172] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.095175] pci 0000:00:0a.0: PME# disabled
[    0.095186] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
[    0.095208] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.095211] pci 0000:00:0b.0: PME# disabled
[    0.095225] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
[    0.095246] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.095249] pci 0000:00:0c.0: PME# disabled
[    0.095262] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
[    0.095283] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.095286] pci 0000:00:0d.0: PME# disabled
[    0.095298] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[    0.095319] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.095322] pci 0000:00:0e.0: PME# disabled
[    0.095338] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.095357] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.095372] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.095388] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.095406] PCI: peer root bus 00 res updated from pci conf
[    0.095424] pci 0000:05:02.0: [1106:3044] type 0 class 0x000c00
[    0.095435] pci 0000:05:02.0: reg 10: [mem 0xd8000000-0xd80007ff]
[    0.095443] pci 0000:05:02.0: reg 14: [io  0xa000-0xa07f]
[    0.095479] pci 0000:05:02.0: supports D2
[    0.095481] pci 0000:05:02.0: PME# supported from D2 D3hot D3cold
[    0.095485] pci 0000:05:02.0: PME# disabled
[    0.095499] pci 0000:05:05.0: [1131:7134] type 0 class 0x000480
[    0.095510] pci 0000:05:05.0: reg 10: [mem 0xd8001000-0xd80013ff]
[    0.095549] pci 0000:05:05.0: supports D1 D2
[    0.095573] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.095576] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[    0.095580] pci 0000:00:09.0:   bridge window [mem 0xd8000000-0xd80fffff]
[    0.095583] pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.095586] pci 0000:00:09.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.095589] pci 0000:00:09.0:   bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[    0.095592] pci 0000:00:09.0:   bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
[    0.095595] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.095614] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    0.095618] pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.095622] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.095626] pci 0000:00:0b.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.095645] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    0.095648] pci 0000:00:0c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.095652] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.095656] pci 0000:00:0c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.095675] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    0.095678] pci 0000:00:0d.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.095681] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.095685] pci 0000:00:0d.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.095712] pci 0000:01:00.0: [10de:0141] type 0 class 0x000300
[    0.095720] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd3ffffff]
[    0.095729] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.095738] pci 0000:01:00.0: reg 1c: [mem 0xd4000000-0xd4ffffff 64bit]
[    0.095748] pci 0000:01:00.0: reg 30: [mem 0xd5000000-0xd501ffff pref]
[    0.095770] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.095777] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    0.095780] pci 0000:00:0e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.095784] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd7ffffff]
[    0.095787] pci 0000:00:0e.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.095797] pci_bus 0000:00: on NUMA node 0
[    0.095800] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.095974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.096133]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.119680] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.119728] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.119780] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.119827] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.119873] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.119921] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.119972] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.120023] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.120071] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.120117] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.120165] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.120213] ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.120263] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.120317] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.120374] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.120430] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.120492] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.120550] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.120608] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[    0.120666] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[    0.120695] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.120757] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.120820] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[    0.120883] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.120946] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[    0.121008] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[    0.121071] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.121134] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.121196] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.121265] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.121334] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.121403] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[    0.121506] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.121508] vgaarb: loaded
[    0.121717] SCSI subsystem initialized
[    0.121757] libata version 3.00 loaded.
[    0.121805] usbcore: registered new interface driver usbfs
[    0.121818] usbcore: registered new interface driver hub
[    0.121840] usbcore: registered new device driver usb
[    0.121950] wmi: Mapper loaded
[    0.121952] PCI: Using ACPI for IRQ routing
[    0.121956] PCI: pci_cache_line_size set to 64 bytes
[    0.121967] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
[    0.122007] Expanded resource reserved due to conflict with PCI Bus #00
[    0.122010] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.122012] reserve RAM buffer: 000000003fff0000 - 000000003fffffff 
[    0.122110] NetLabel: Initializing
[    0.122112] NetLabel:  domain hash size = 128
[    0.122114] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.122125] NetLabel:  unlabeled traffic allowed by default
[    0.129381] AppArmor: AppArmor Filesystem Enabled
[    0.129413] pnp: PnP ACPI init
[    0.129434] ACPI: bus type pnp registered
[    0.129543] pnp 00:00: [bus 00-ff]
[    0.129546] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.129549] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.129551] pnp 00:00: [io  0x0d00-0xffff window]
[    0.129554] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.129556] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.129559] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[    0.129621] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.129640] pnp 00:01: [io  0x4000-0x407f]
[    0.129642] pnp 00:01: [io  0x4080-0x40ff]
[    0.129645] pnp 00:01: [io  0x4400-0x447f]
[    0.129647] pnp 00:01: [io  0x4480-0x44ff]
[    0.129649] pnp 00:01: [io  0x4800-0x487f]
[    0.129651] pnp 00:01: [io  0x4880-0x48ff]
[    0.129705] system 00:01: [io  0x4000-0x407f] has been reserved
[    0.129708] system 00:01: [io  0x4080-0x40ff] has been reserved
[    0.129711] system 00:01: [io  0x4400-0x447f] has been reserved
[    0.129714] system 00:01: [io  0x4480-0x44ff] has been reserved
[    0.129717] system 00:01: [io  0x4800-0x487f] has been reserved
[    0.129720] system 00:01: [io  0x4880-0x48ff] has been reserved
[    0.129723] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.130234] pnp 00:02: [io  0x0010-0x001f]
[    0.130237] pnp 00:02: [io  0x0022-0x003f]
[    0.130239] pnp 00:02: [io  0x0044-0x005f]
[    0.130241] pnp 00:02: [io  0x0062-0x0063]
[    0.130243] pnp 00:02: [io  0x0065-0x006f]
[    0.130245] pnp 00:02: [io  0x0074-0x007f]
[    0.130247] pnp 00:02: [io  0x0091-0x0093]
[    0.130250] pnp 00:02: [io  0x00a2-0x00bf]
[    0.130252] pnp 00:02: [io  0x00e0-0x00ef]
[    0.130254] pnp 00:02: [io  0x04d0-0x04d1]
[    0.130256] pnp 00:02: [io  0x0800-0x087f]
[    0.130320] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.130323] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.130327] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.130338] pnp 00:03: [dma 4]
[    0.130340] pnp 00:03: [io  0x0000-0x000f]
[    0.130343] pnp 00:03: [io  0x0080-0x0090]
[    0.130345] pnp 00:03: [io  0x0094-0x009f]
[    0.130347] pnp 00:03: [io  0x00c0-0x00df]
[    0.130384] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.130394] pnp 00:04: [io  0x0070-0x0073]
[    0.130407] pnp 00:04: [irq 8]
[    0.130444] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.130453] pnp 00:05: [io  0x0061]
[    0.130490] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.130499] pnp 00:06: [io  0x00f0-0x00ff]
[    0.130505] pnp 00:06: [irq 13]
[    0.130545] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.130741] pnp 00:07: [io  0x03f8-0x03ff]
[    0.130747] pnp 00:07: [irq 4]
[    0.130802] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.130956] pnp 00:08: [io  0x0378-0x037f]
[    0.130962] pnp 00:08: [irq 7]
[    0.131013] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.131096] pnp 00:09: [irq 12]
[    0.131136] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.131161] pnp 00:0a: [io  0x0060]
[    0.131163] pnp 00:0a: [io  0x0064]
[    0.131169] pnp 00:0a: [irq 1]
[    0.131210] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.131238] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.131293] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.131296] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.131379] pnp 00:0c: [mem 0x000f0000-0x000f3fff]
[    0.131382] pnp 00:0c: [mem 0x000f4000-0x000f7fff]
[    0.131384] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[    0.131386] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[    0.131389] pnp 00:0c: [mem 0x3fff0000-0x3fffffff]
[    0.131391] pnp 00:0c: [mem 0xffff0000-0xffffffff]
[    0.131393] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.131396] pnp 00:0c: [mem 0x00100000-0x3ffeffff]
[    0.131398] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    0.131400] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[    0.131403] pnp 00:0c: [mem 0xfefff000-0xfeffffff]
[    0.131405] pnp 00:0c: [mem 0xfff80000-0xfff80fff]
[    0.131407] pnp 00:0c: [mem 0xfff90000-0xfffbffff]
[    0.131410] pnp 00:0c: [mem 0xfffed000-0xfffeffff]
[    0.131478] system 00:0c: [mem 0x000f0000-0x000f3fff] could not be reserved
[    0.131481] system 00:0c: [mem 0x000f4000-0x000f7fff] could not be reserved
[    0.131484] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.131488] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.131491] system 00:0c: [mem 0x3fff0000-0x3fffffff] could not be reserved
[    0.131494] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[    0.131497] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.131500] system 00:0c: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.131503] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.131506] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.131509] system 00:0c: [mem 0xfefff000-0xfeffffff] has been reserved
[    0.131513] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.131516] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.131519] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.131522] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.131533] pnp: PnP ACPI: found 13 devices
[    0.131535] ACPI: ACPI bus type pnp unregistered
[    0.131538] PnPBIOS: Disabled by ACPI PNP
[    0.167837] Switching to clocksource acpi_pm
[    0.167875] pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x400000ff]
[    0.167880] pci 0000:00:02.1: BAR 0: set to [mem 0x40000000-0x400000ff] (PCI address [0x40000000-0x400000ff])
[    0.167884] pci 0000:00:09.0: PCI bridge to [bus 05-05]
[    0.167887] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[    0.167890] pci 0000:00:09.0:   bridge window [mem 0xd8000000-0xd80fffff]
[    0.167893] pci 0000:00:09.0:   bridge window [mem pref disabled]
[    0.167897] pci 0000:00:0b.0: PCI bridge to [bus 04-04]
[    0.167899] pci 0000:00:0b.0:   bridge window [io  disabled]
[    0.167902] pci 0000:00:0b.0:   bridge window [mem disabled]
[    0.167905] pci 0000:00:0b.0:   bridge window [mem pref disabled]
[    0.167908] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[    0.167910] pci 0000:00:0c.0:   bridge window [io  disabled]
[    0.167913] pci 0000:00:0c.0:   bridge window [mem disabled]
[    0.167916] pci 0000:00:0c.0:   bridge window [mem pref disabled]
[    0.167920] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    0.167922] pci 0000:00:0d.0:   bridge window [io  disabled]
[    0.167924] pci 0000:00:0d.0:   bridge window [mem disabled]
[    0.167927] pci 0000:00:0d.0:   bridge window [mem pref disabled]
[    0.167931] pci 0000:00:0e.0: PCI bridge to [bus 01-01]
[    0.167933] pci 0000:00:0e.0:   bridge window [io  disabled]
[    0.167936] pci 0000:00:0e.0:   bridge window [mem 0xd0000000-0xd7ffffff]
[    0.167940] pci 0000:00:0e.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.167948] pci 0000:00:09.0: setting latency timer to 64
[    0.167952] pci 0000:00:0b.0: setting latency timer to 64
[    0.167956] pci 0000:00:0c.0: setting latency timer to 64
[    0.167961] pci 0000:00:0d.0: setting latency timer to 64
[    0.167965] pci 0000:00:0e.0: setting latency timer to 64
[    0.167968] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.167971] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
[    0.167973] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
[    0.167976] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    0.167979] pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
[    0.167983] pci_bus 0000:05: resource 1 [mem 0xd8000000-0xd80fffff]
[    0.167986] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
[    0.167988] pci_bus 0000:05: resource 5 [mem 0x40000000-0xffffffff]
[    0.167991] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
[    0.167994] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[    0.167997] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd7ffffff]
[    0.168000] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.168000] Switched to NOHz mode on CPU #0
[    0.168000] NET: Registered protocol family 2
[    0.168000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.168000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.168000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.168000] TCP: Hash tables configured (established 131072 bind 65536)
[    0.168000] TCP reno registered
[    0.168000] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.168000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.168000] NET: Registered protocol family 1
[    0.184082] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.184088] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    0.184095] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.184100] pci 0000:00:0b.0: Linking AER extended capability
[    0.184135] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.184140] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    0.184147] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.184150] pci 0000:00:0c.0: Linking AER extended capability
[    0.184189] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.184194] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    0.184201] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.184204] pci 0000:00:0d.0: Linking AER extended capability
[    0.184245] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.184250] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    0.184257] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.184260] pci 0000:00:0e.0: Linking AER extended capability
[    0.184278] pci 0000:01:00.0: Boot video device
[    0.184281] PCI: CLS 32 bytes, default 64
[    0.184492] cpufreq-nforce2: No nForce2 chipset.
[    0.184632] audit: initializing netlink socket (disabled)
[    0.184641] type=2000 audit(1305755338.180:1): initialized
[    0.194774] Trying to unpack rootfs image as initramfs...
[    0.212144] highmem bounce pool size: 64 pages
[    0.212150] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.220177] VFS: Disk quotas dquot_6.5.2
[    0.220260] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.220958] fuse init (API version 7.16)
[    0.221049] msgmni has been set to 1704
[    0.228508] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.228536] io scheduler noop registered
[    0.228538] io scheduler deadline registered
[    0.228555] io scheduler cfq registered (default)
[    0.228676] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.228704] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    0.228746] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.228762] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    0.228797] pcieport 0000:00:0d.0: setting latency timer to 64
[    0.228813] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    0.228850] pcieport 0000:00:0e.0: setting latency timer to 64
[    0.228865] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    0.228934] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.228961] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.229116] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.229122] ACPI: Power Button [PWRB]
[    0.229181] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.229184] ACPI: Power Button [PWRF]
[    0.229240] ACPI: Fan [FAN] (on)
[    0.229468] ACPI: acpi_idle registered with cpuidle
[    0.232551] thermal LNXTHERM:00: registered as thermal_zone0
[    0.232553] ACPI: Thermal Zone [THRM] (40 C)
[    0.232604] ERST: Table is not found!
[    0.232697] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.252998] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.253026] isapnp: Scanning for PnP cards...
[    0.341364] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.364419] Linux agpgart interface v0.103
[    0.365786] brd: module loaded
[    0.366356] loop: module loaded
[    0.366460] i2c-core: driver [adp5520] using legacy suspend method
[    0.366462] i2c-core: driver [adp5520] using legacy resume method
[    0.366627] pata_acpi 0000:00:06.0: setting latency timer to 64
[    0.366853] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    0.366870] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.366885] pata_acpi 0000:00:07.0: setting latency timer to 64
[    0.366891] pata_acpi 0000:00:07.0: PCI INT A disabled
[    0.367048] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[    0.367057] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    0.367072] pata_acpi 0000:00:08.0: setting latency timer to 64
[    0.367078] pata_acpi 0000:00:08.0: PCI INT A disabled
[    0.367472] Fixed MDIO Bus: probed
[    0.367515] PPP generic driver version 2.4.2
[    0.367555] tun: Universal TUN/TAP device driver, 1.6
[    0.367557] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.367634] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.367766] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[    0.367775] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[    0.367788] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.367791] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.367829] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.367855] ehci_hcd 0000:00:02.1: debug port 1
[    0.367860] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[    0.367876] ehci_hcd 0000:00:02.1: irq 21, io mem 0x40000000
[    0.415411] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.415562] hub 1-0:1.0: USB hub found
[    0.415567] hub 1-0:1.0: 8 ports detected
[    0.415651] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.415819] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[    0.415833] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[    0.415847] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.415850] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.415890] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.415914] ohci_hcd 0000:00:02.0: irq 20, io mem 0xd8104000
[    0.502276] hub 2-0:1.0: USB hub found
[    0.502283] hub 2-0:1.0: 8 ports detected
[    0.502370] uhci_hcd: USB Universal Host Controller Interface driver
[    0.502474] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.509424] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.509436] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.509575] mousedev: PS/2 mouse device common for all mice
[    0.509712] rtc_cmos 00:04: RTC can wake from S4
[    0.509757] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.509779] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.509874] device-mapper: uevent: version 1.0.3
[    0.509951] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    0.512177] device-mapper: multipath: version 1.2.0 loaded
[    0.512180] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.512269] EISA: Probing bus 0 at eisa.0
[    0.512271] EISA: Cannot allocate resource for mainboard
[    0.512274] Cannot allocate resource for EISA slot 1
[    0.512276] Cannot allocate resource for EISA slot 2
[    0.512279] Cannot allocate resource for EISA slot 3
[    0.512281] Cannot allocate resource for EISA slot 4
[    0.512283] Cannot allocate resource for EISA slot 5
[    0.512285] Cannot allocate resource for EISA slot 6
[    0.512288] Cannot allocate resource for EISA slot 7
[    0.512290] Cannot allocate resource for EISA slot 8
[    0.512292] EISA: Detected 0 cards.
[    0.560225] cpuidle: using governor ladder
[    0.560228] cpuidle: using governor menu
[    0.560502] TCP cubic registered
[    0.560633] NET: Registered protocol family 10
[    0.561172] NET: Registered protocol family 17
[    0.561194] Registering the dns_resolver key type
[    0.561211] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00)
[    0.561254] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x6
[    0.561256] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x8
[    0.561258] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
[    0.561261] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
[    0.561303] Using IPI No-Shortcut mode
[    0.561417] PM: Hibernation image not present or could not be loaded.
[    0.561428] registered taskstats version 1
[    0.561618]   Magic number: 11:362:854
[    0.561724] rtc_cmos 00:04: setting system clock to 2011-05-18 21:48:59 UTC (1305755339)
[    0.561727] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.561729] EDD information not available.
[    0.783405] isapnp: No Plug & Play device found
[    0.819018] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.819158] usb 1-5: new high speed USB device using ehci_hcd and address 2
[    0.917483] Freeing initrd memory: 12516k freed
[    0.925743] Freeing unused kernel memory: 700k freed
[    0.926257] Write protecting the kernel text: 5192k
[    0.926291] Write protecting the kernel read-only data: 2148k
[    0.947879] <30>udev[61]: starting version 167
[    1.074681] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.074848] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    1.074854] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[    1.074859] forcedeth 0000:00:0a.0: setting latency timer to 64
[    1.080039] usb 1-7: new high speed USB device using ehci_hcd and address 3
[    1.149445] usbcore: registered new interface driver uas
[    1.190568] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    1.190585] firewire_ohci 0000:05:02.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[    1.195748] Initializing USB Mass Storage driver...
[    1.195951] scsi0 : usb-storage 1-5:1.0
[    1.196276] usbcore: registered new interface driver usb-storage
[    1.196279] USB Mass Storage support registered.
[    1.252067] firewire_ohci: Added fw-ohci device 0000:05:02.0, OHCI v1.0, 4 IR + 8 IT contexts, quirks 0x11
[    1.596826] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:92:96:88:aa
[    1.596831] forcedeth 0000:00:0a.0: highdma csum lnktim desc-v3
[    1.596908] sata_nv 0000:00:07.0: version 3.5
[    1.596921] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    1.596966] sata_nv 0000:00:07.0: setting latency timer to 64
[    1.598848] scsi1 : sata_nv
[    1.599206] scsi2 : sata_nv
[    1.599331] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
[    1.599334] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
[    1.599650] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    1.599687] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.599991] scsi3 : sata_nv
[    1.600130] scsi4 : sata_nv
[    1.600274] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22
[    1.600277] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22
[    1.600318] pata_amd 0000:00:06.0: version 0.4.1
[    1.600350] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.600880] scsi5 : pata_amd
[    1.601000] scsi6 : pata_amd
[    1.601405] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.601408] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.752094] firewire_core: created device fw0: GUID 0011d800012ddb05, S400
[    1.908019] ata1: SATA link down (SStatus 0 SControl 300)
[    2.068023] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.077408] ata3.00: ATA-6: WDC WD1600JD-55HBB0, 08.02D08, max UDMA/133
[    2.077411] ata3.00: 312581808 sectors, multi 1: LBA48 
[    2.093365] ata3.00: configured for UDMA/133
[    2.198171] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
[    2.199409] scsi 0:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
[    2.200660] scsi 0:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
[    2.201910] scsi 0:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
[    2.203160] scsi 0:0:0:4: Direct-Access     Generic  STORAGE DEVICE   9144 PQ: 0 ANSI: 0
[    2.205854] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.207331] sd 0:0:0:1: Attached scsi generic sg1 type 0
[    2.207473] sd 0:0:0:2: Attached scsi generic sg2 type 0
[    2.207606] sd 0:0:0:3: Attached scsi generic sg3 type 0
[    2.207777] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    2.208283] sd 0:0:0:4: Attached scsi generic sg4 type 0
[    2.214158] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[    2.217410] sd 0:0:0:2: [sdc] Attached SCSI removable disk
[    2.220051] ata2: SATA link down (SStatus 0 SControl 300)
[    2.220230] scsi 3:0:0:0: Direct-Access     ATA      WDC WD1600JD-55H 08.0 PQ: 0 ANSI: 5
[    2.220402] sd 3:0:0:0: Attached scsi generic sg5 type 0
[    2.220489] sd 3:0:0:0: [sdf] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.220533] sd 0:0:0:3: [sdd] Attached SCSI removable disk
[    2.220553] sd 3:0:0:0: [sdf] Write Protect is off
[    2.220556] sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[    2.220576] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.221527] sd 0:0:0:4: [sde] Attached SCSI removable disk
[    2.277222]  sdf: sdf1 sdf2 sdf3
[    2.277520] sd 3:0:0:0: [sdf] Attached SCSI disk
[    2.688024] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.697375] ata4.00: ATA-6: WDC WD1600JD-55HBB0, 08.02D08, max UDMA/133
[    2.697379] ata4.00: 312581808 sectors, multi 1: LBA48 
[    2.713389] ata4.00: configured for UDMA/133
[    2.713472] scsi 4:0:0:0: Direct-Access     ATA      WDC WD1600JD-55H 08.0 PQ: 0 ANSI: 5
[    2.713626] sd 4:0:0:0: Attached scsi generic sg6 type 0
[    2.713777] sd 4:0:0:0: [sdg] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.713819] sd 4:0:0:0: [sdg] Write Protect is off
[    2.713822] sd 4:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[    2.713841] sd 4:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.747312]  sdg: sdg1
[    2.747469] sd 4:0:0:0: [sdg] Attached SCSI disk
[    2.876235] ata6.00: ATAPI: HL-DT-ST DVD-RW GWA-4163B, A102, max UDMA/33
[    2.876242] ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13)
[    2.892170] ata6.00: configured for UDMA/33
[    2.897866] scsi 6:0:0:0: CD-ROM            HL-DT-ST DVD-RW GWA-4163B A102 PQ: 0 ANSI: 5
[    2.903275] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[    2.903278] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.903362] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    2.903419] sr 6:0:0:0: Attached scsi generic sg7 type 5
[    3.434892] EXT4-fs (sdf2): mounted filesystem with ordered data mode. Opts: (null)
[   14.793436] Adding 1465340k swap on /dev/sdf3.  Priority:-1 extents:1 across:1465340k 
[   14.845814] <30>udev[363]: starting version 167
[   14.879158] lp: driver loaded but no devices found
[   14.981220] EXT4-fs (sdf2): re-mounted. Opts: errors=remount-ro
[   15.205209] type=1400 audit(1305748154.139:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=578 comm="apparmor_parser"
[   15.205604] type=1400 audit(1305748154.139:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=578 comm="apparmor_parser"
[   15.205845] type=1400 audit(1305748154.139:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=578 comm="apparmor_parser"
[   15.386375] ACPI: resource nForce2_smbus [io  0x4c00-0x4c3f] conflicts with ACPI region SM00 [io 0x4c00-0x4c05]
[   15.386379] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.386481] i2c i2c-0: nForce2 SMBus adapter at 0x4c40
[   15.529464] forcedeth 0000:00:0a.0: eth0: no link during initialization
[   15.531883] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.534280] parport_pc 00:08: reported by Plug and Play ACPI
[   15.534304] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   15.736101] lp0: using parport0 (interrupt-driven).
[   15.891985] type=1400 audit(1305748154.823:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=754 comm="apparmor_parser"
[   15.902326] type=1400 audit(1305748154.835:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=756 comm="apparmor_parser"
[   15.910781] type=1400 audit(1305748154.843:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=756 comm="apparmor_parser"
[   15.911033] type=1400 audit(1305748154.843:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=756 comm="apparmor_parser"
[   15.935846] type=1400 audit(1305748154.867:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=758 comm="apparmor_parser"
[   15.947002] type=1400 audit(1305748154.879:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=758 comm="apparmor_parser"
[   15.954558] type=1400 audit(1305748154.887:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=758 comm="apparmor_parser"
[   16.126090] psmouse serio1: ID: 10 00 64
[   16.440650] Linux video capture interface: v2.00
[   16.448999] cfg80211: Calling CRDA to update world regulatory domain
[   16.451510] ppdev: user-space parallel port driver
[   16.494757] nvidia: module license 'NVIDIA' taints kernel.
[   16.494762] Disabling lock debugging due to kernel taint
[   16.517331] cfg80211: World regulatory domain updated:
[   16.517334] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.517338] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.517341] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.517344] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.517346] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.517349] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.604232] IR NEC protocol handler initialized
[   16.614508] IR RC5(x) protocol handler initialized
[   16.624111] IR RC6 protocol handler initialized
[   16.635180] IR JVC protocol handler initialized
[   17.825611] IR Sony protocol handler initialized
[   17.838549] lirc_dev: IR Remote Control driver registered, major 250 
[   17.842611] IR LIRC bridge handler initialized
[   18.121316] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[   18.121335] nvidia 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[   18.121343] nvidia 0000:01:00.0: setting latency timer to 64
[   18.121348] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   18.126717] NVRM: loading NVIDIA UNIX x86 Kernel Module  270.41.06  Mon Apr 18 14:54:25 PDT 2011
[   18.137259] saa7130/34: v4l2 driver version 0.2.16 loaded
[   18.137312] saa7134 0000:05:05.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[   18.137318] saa7134[0]: found at 0000:05:05.0, rev: 1, irq: 18, latency: 32, mmio: 0xd8001000
[   18.137324] saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
[   18.137340] saa7134[0]: board init: gpio is c806000
[   18.196980] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[   18.196987] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[   18.197011] Intel ICH 0000:00:04.0: setting latency timer to 64
[   18.284891] usb 1-7: reset high speed USB device using ehci_hcd and address 3
[   18.289296] saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
[   18.289305] saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
[   18.289314] saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
[   18.289322] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.289329] saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
[   18.289337] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.289345] saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 07 28 e9 ff ff ff ff ff ff ff ff
[   18.289353] saa7134[0]: i2c eeprom 70: 00 30 8d 16 e8 8a ff ff 74 30 ff ff ff ff ff ff
[   18.289361] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.289369] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.289376] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.289384] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.289392] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.289400] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.289408] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.289415] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   18.292845] i2c-core: driver [tuner] using legacy suspend method
[   18.292849] i2c-core: driver [tuner] using legacy resume method
[   18.310246] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[   18.360125] tuner 1-0043: chip found @ 0x86 (saa7134[0])
[   18.362779] tda9887 1-0043: creating new instance
[   18.362783] tda9887 1-0043: tda988[5/6/7] found
[   18.384019] Chip ID is not zero. It is not a TEA5767
[   18.384110] tuner 1-0060: chip found @ 0xc0 (saa7134[0])
[   18.400022] mt20xx 1-0060: microtune: companycode=3cbf part=42 rev=2f
[   18.417474] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.417478] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417481] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.417484] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417487] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.417490] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417493] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.417496] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417498] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.417501] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417504] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.417507] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417510] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.417513] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417516] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.417519] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417522] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.417525] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417527] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.417531] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417533] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.417536] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417539] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   18.417542] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417545] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   18.417548] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.417551] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   18.417554] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[   18.423965] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.424566] zd1211rw 1-7:1.0: phy0
[   18.424587] usbcore: registered new interface driver zd1211rw
[   18.436040] mt20xx 1-0060: microtune MT2050 found, OK
[   18.520218] saa7134[0]: registered device video0 [v4l2]
[   18.520318] saa7134[0]: registered device vbi0
[   18.535245] intel8x0_measure_ac97_clock: measured 59100 usecs (2896 samples)
[   18.535249] intel8x0: clocking to 47019
[   18.542488] saa7134 ALSA driver for DMA sound loaded
[   18.542517] saa7134[0]/alsa: saa7134[0] at 0xd8001000 irq 18 registered as card -2
[   18.556817] dvb_init() allocating 1 frontend
[   18.604021] DVB: registering new adapter (saa7134[0])
[   18.604027] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
[   18.870029] zd1211rw 1-7:1.0: firmware version 4725
[   18.910029] zd1211rw 1-7:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--NS
[   18.913037] cfg80211: Calling CRDA for country: DE
[   18.916919] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.916924] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916927] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.916930] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916932] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.916935] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916938] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.916941] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916943] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.916946] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916948] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.916951] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916954] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.916957] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916959] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.916962] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916964] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.916967] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916970] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.916973] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916975] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.916978] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916980] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   18.916983] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916986] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   18.916989] cfg80211: 2400000 KHz - 2483500 KHz @  KHz), (N/A mBi, 2000 mBm)
[   18.916991] cfg80211: Disabling freq 2484 MHz
[   18.916994] cfg80211: Regulatory domain changed to country: DE
[   18.916995] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.916998] cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   18.917001] cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   18.917004] cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   18.917006] cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[   18.931442] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.006906] vesafb: framebuffer at 0xc0000000, mapped to 0xf8580000, using 1216k, total 1216k
[   19.006910] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   19.006912] vesafb: scrolling: redraw
[   19.006916] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   19.007629] Console: switching to colour frame buffer device 80x30
[   19.007645] fb0: VESA VGA frame buffer device
[   19.007841] EXT4-fs (sdf2): re-mounted. Opts: errors=remount-ro,commit=0
[   23.724697] EXT4-fs (sdf2): re-mounted. Opts: errors=remount-ro,commit=0
[   31.428037] wlan0: authenticate with 00:1a:4f:22:8d:e3 (try 1)
[   31.430659] wlan0: authenticated
[   31.430676] wlan0: associate with 00:1a:4f:22:8d:e3 (try 1)
[   31.436786] wlan0: RX AssocResp from 00:1a:4f:22:8d:e3 (capab=0x411 status=0 aid=2)
[   31.436790] wlan0: associated
[   31.437323] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   31.507024] Intel AES-NI instructions are not detected.
[   31.518074] padlock_aes: VIA PadLock not detected.
[   41.752015] wlan0: no IPv6 routers present
[   53.261158] saa7134[0]/irq[10,-61685]: r=0x20 s=0x10000000 PE
[   53.261162] saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
[  812.687634] usb 1-7: USB disconnect, address 3
[  812.687922] wlan0: deauthenticating from 00:1a:4f:22:8d:e3 by local choice (reason=3)
[  812.688127] zd1211rw 1-7:1.0: error ioread32(CR_REG1): -19
[  812.688315] cfg80211: All devices are disconnected, going to restore regulatory settings
[  812.688322] cfg80211: Restoring regulatory settings
[  812.688335] cfg80211: Calling CRDA to update world regulatory domain
[  812.689339] zd1211rw 1-7:1.0: error ioread32(CR_REG1): -19
[  812.725657] cfg80211: World regulatory domain updated:
[  812.725664] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  812.725671] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  812.725682] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  812.725688] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  812.725694] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  812.725701] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  815.376034] usb 1-8: new high speed USB device using ehci_hcd and address 4
[  815.520959] scsi7 : usb-storage 1-8:1.0
[  816.569736] scsi 7:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
[  816.576203] sd 7:0:0:0: Attached scsi generic sg8 type 0
[  817.056846] sd 7:0:0:0: [sdh] 31271168 512-byte logical blocks: (16.0 GB/14.9 GiB)
[  817.057708] sd 7:0:0:0: [sdh] Write Protect is off
[  817.057716] sd 7:0:0:0: [sdh] Mode Sense: 23 00 00 00
[  817.058454] sd 7:0:0:0: [sdh] No Caching mode page present
[  817.058461] sd 7:0:0:0: [sdh] Assuming drive cache: write through
[  817.449459] sd 7:0:0:0: [sdh] No Caching mode page present
[  817.449467] sd 7:0:0:0: [sdh] Assuming drive cache: write through
[  817.489956]  sdh: sdh1
[  817.493460] sd 7:0:0:0: [sdh] No Caching mode page present
[  817.493469] sd 7:0:0:0: [sdh] Assuming drive cache: write through
[  817.493476] sd 7:0:0:0: [sdh] Attached SCSI removable disk
[  834.660117] WARNING! power/level is deprecated; use power/control instead
[  834.740157] usb 1-8: USB disconnect, address 4
[  835.112035] usb 2-8: new full speed USB device using ohci_hcd and address 2
[  835.312053] usb 2-8: not running at top speed; connect to a high speed hub
[  835.340982] scsi8 : usb-storage 2-8:1.0
[  836.348089] scsi 8:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
[  836.354982] sd 8:0:0:0: Attached scsi generic sg8 type 0
[  836.375090] sd 8:0:0:0: [sdh] Attached SCSI removable disk
[  852.228163] usb 2-8: USB disconnect, address 2
[  860.484033] usb 1-8: new high speed USB device using ehci_hcd and address 5
[  860.628482] scsi9 : usb-storage 1-8:1.0
[  861.677872] scsi 9:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
[  861.684061] sd 9:0:0:0: Attached scsi generic sg8 type 0
[  862.110849] sd 9:0:0:0: [sdh] 31271168 512-byte logical blocks: (16.0 GB/14.9 GiB)
[  862.111711] sd 9:0:0:0: [sdh] Write Protect is off
[  862.111718] sd 9:0:0:0: [sdh] Mode Sense: 23 00 00 00
[  862.112587] sd 9:0:0:0: [sdh] No Caching mode page present
[  862.112594] sd 9:0:0:0: [sdh] Assuming drive cache: write through
[  862.117464] sd 9:0:0:0: [sdh] No Caching mode page present
[  862.117472] sd 9:0:0:0: [sdh] Assuming drive cache: write through
[  862.158214]  sdh: sdh1
[  862.161464] sd 9:0:0:0: [sdh] No Caching mode page present
[  862.161472] sd 9:0:0:0: [sdh] Assuming drive cache: write through
[  862.161479] sd 9:0:0:0: [sdh] Attached SCSI removable disk
[  893.584158] usb 1-8: USB disconnect, address 5
[  893.956035] usb 2-8: new full speed USB device using ohci_hcd and address 3
[  894.157041] usb 2-8: not running at top speed; connect to a high speed hub
[  894.184416] scsi10 : usb-storage 2-8:1.0
[  895.197080] scsi 10:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
[  895.203891] sd 10:0:0:0: Attached scsi generic sg8 type 0
[  895.224084] sd 10:0:0:0: [sdh] Attached SCSI removable disk
[  901.692153] usb 2-8: USB disconnect, address 3
[  968.188033] usb 1-8: new high speed USB device using ehci_hcd and address 6
[  968.333182] scsi11 : usb-storage 1-8:1.0
[  969.381886] scsi 11:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
[  969.388325] sd 11:0:0:0: Attached scsi generic sg8 type 0
[  969.814866] sd 11:0:0:0: [sdh] 31271168 512-byte logical blocks: (16.0 GB/14.9 GiB)
[  969.815726] sd 11:0:0:0: [sdh] Write Protect is off
[  969.815733] sd 11:0:0:0: [sdh] Mode Sense: 23 00 00 00
[  969.816727] sd 11:0:0:0: [sdh] No Caching mode page present
[  969.816734] sd 11:0:0:0: [sdh] Assuming drive cache: write through
[  969.821477] sd 11:0:0:0: [sdh] No Caching mode page present
[  969.821485] sd 11:0:0:0: [sdh] Assuming drive cache: write through
[  969.861856]  sdh: sdh1
[  969.865476] sd 11:0:0:0: [sdh] No Caching mode page present
[  969.865485] sd 11:0:0:0: [sdh] Assuming drive cache: write through
[  969.865491] sd 11:0:0:0: [sdh] Attached SCSI removable disk
[ 1005.620256] usb 1-8: USB disconnect, address 6
[ 1005.992037] usb 2-8: new full speed USB device using ohci_hcd and address 4
[ 1006.192047] usb 2-8: not running at top speed; connect to a high speed hub
[ 1006.219650] scsi12 : usb-storage 2-8:1.0
[ 1007.233091] scsi 12:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
[ 1007.240992] sd 12:0:0:0: Attached scsi generic sg8 type 0
[ 1007.250562] sd 12:0:0:0: [sdh] 31271168 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1007.257078] sd 12:0:0:0: [sdh] Write Protect is off
[ 1007.257087] sd 12:0:0:0: [sdh] Mode Sense: 23 00 00 00
[ 1007.271057] sd 12:0:0:0: [sdh] No Caching mode page present
[ 1007.271064] sd 12:0:0:0: [sdh] Assuming drive cache: write through
[ 1007.699058] sd 12:0:0:0: [sdh] No Caching mode page present
[ 1007.699066] sd 12:0:0:0: [sdh] Assuming drive cache: write through
[ 1007.709178]  sdh: sdh1
[ 1007.770064] sd 12:0:0:0: [sdh] No Caching mode page present
[ 1007.770072] sd 12:0:0:0: [sdh] Assuming drive cache: write through
[ 1007.770080] sd 12:0:0:0: [sdh] Attached SCSI removable disk
[ 1074.100110] usb 2-8: USB disconnect, address 4
