chuck@FEHU:~/development/gnucash$ ./autogen.sh
Creating po/POTFILES.in ...
Creating aclocal.m4 ...
Running glib-gettextize --force --copy ...  
GnuCash note: Please ignore the output of glib-gettextize below!
Copying file mkinstalldirs
Copying file po/Makefile.in.in

Please add the files
  codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
  progtest.m4
from the /aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.

GnuCash note: Please ignore the output of glib-gettextize above!

Ensure aclocal.m4 is writable ...
Ensure po/POTFILES.in is writable ...
Running intltoolize --force --copy ...
You should add the contents of '/usr/share/aclocal/intltool.m4' to 'aclocal.m4'.
Running libtoolize --force --copy ...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: putting macros in `macros'.
libtoolize: copying file `macros/libtool.m4'
libtoolize: copying file `macros/ltoptions.m4'
libtoolize: copying file `macros/ltsugar.m4'
libtoolize: copying file `macros/ltversion.m4'
libtoolize: copying file `macros/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
Running aclocal  -I macros ...
Running autoheader...
Running automake --add-missing --gnu --warnings=no-portability  ...
configure.ac:60: installing `./compile'
configure.ac:144: installing `./config.guess'
configure.ac:144: installing `./config.sub'
configure.ac:36: installing `./install-sh'
configure.ac:36: installing `./missing'
lib/libc/Makefile.am: installing `./depcomp'
src/doc/design/Makefile.am:2: installing `src/doc/design/mdate-sh'
src/doc/design/Makefile.am:2: installing `src/doc/design/texinfo.tex'
src/optional/python-bindings/Makefile.am:5: installing `./py-compile'
Makefile.am: installing `./INSTALL'
Makefile.am: installing `./COPYING' using GNU General Public License v3 file
Makefile.am:     Consider adding the COPYING file to the version control system
Makefile.am:     for your code, to avoid questions about which license your project uses.
Running autoconf ...

NOTE: Just run configure.  Even if something told you to run
      aclocal, automake, or anything else above, IGNORE IT.
      Everything has been run properly.  Just run configure...

You must now run ./configure --enable-compile-warnings ...
chuck@FEHU:~/development/gnucash$ ./configure --prefix=$HOME/unstable/gnucash --enable-debug --enable-doxygen --enable-error-on-warning --enable-compile-warnings
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking whether gcc and cc understand -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether NLS is requested... yes
checking for intltool-update... /usr/bin/intltool-update
checking for intltool-merge... /usr/bin/intltool-merge
checking for intltool-extract... /usr/bin/intltool-extract
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for perl... /usr/bin/perl
checking for perl >= 5.8.1... 5.10.1
checking for XML::Parser... ok
Using config source xml:merged:/etc/gconf/gconf.xml.defaults for schema installation
Using $(sysconfdir)/gconf/schemas as install directory for schema files
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... (cached) /usr/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... (cached) /usr/bin/msgfmt
checking for xgettext... (cached) /usr/bin/xgettext
checking for catalogs to be installed...  bg ca cs da de el en_GB es_NI es eu fa fi fr he hu it ja ko lt lv nb ne nl pl pt_BR pt ro ru rw sk sv ta tr uk vi zh_CN zh_TW
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for dlfcn.h... yes
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... no
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for library containing strerror... none required
checking whether byte ordering is bigendian... no
checking whether make sets $(MAKE)... (cached) yes
checking whether ln -s works... yes
checking for ANSI C header files... (cached) yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/times.h usability... yes
checking sys/times.h presence... yes
checking for sys/times.h... yes
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking for stpcpy... yes
checking for memcpy... yes
checking for timegm... yes
checking for towupper... yes
checking for setenv... yes
checking for the tm_gmtoff member of struct tm... yes
checking if scanf supports %lld conversions... yes
checking for swig... /usr/bin/swig
checking for SWIG version... 1.3.40
configure: SWIG executable is '/usr/bin/swig'
checking for /proc/self/maps... yes
checking whether everything is installed to the same prefix... yes
checking whether binary relocation support should be enabled... yes
checking for pthread_getspecific in -lpthread... yes
checking whether binary relocation should use threads... yes
checking for pkg-config... /usr/bin/pkg-config
checking for glib-2.0 >= 2.20 gthread-2.0 gobject-2.0 gmodule-2.0... yes
checking GLIB_CFLAGS... -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
checking GLIB_LIBS... -pthread -Wl,--export-dynamic -lgobject-2.0 -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0  
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking for dlfcn.h... (cached) yes
checking dl.h usability... no
checking dl.h presence... no
checking for dl.h... no
checking utmp.h usability... yes
checking utmp.h presence... yes
checking for utmp.h... yes
checking for locale.h... (cached) yes
checking mcheck.h usability... yes
checking mcheck.h presence... yes
checking for mcheck.h... yes
checking for unistd.h... (cached) yes
checking wctype.h usability... yes
checking wctype.h presence... yes
checking for wctype.h... yes
checking for dlsym... no
checking for dlsym in -ldl... yes
checking for dlerror... yes
checking operating system... linux/other
checking X11/Xlib.h usability... yes
checking X11/Xlib.h presence... yes
checking for X11/Xlib.h... yes
checking glob.h usability... yes
checking glob.h presence... yes
checking for glob.h... yes
checking for chown... yes
checking for gethostname... yes
checking for getppid... yes
checking for getuid... yes
checking for gettimeofday... yes
checking for gmtime_r... yes
checking for gethostid... yes
checking for link... yes
checking for qt_null in -lqthreads... no
checking for qt_null in -lqt... no
checking for main in -ltermcap... yes
checking for main in -lreadline... yes
checking for guile-config... yes
checking whether guile-config works... yes
checking for sin in -lm... yes
checking for guile libraries...  -pthread  -lguile -lltdl -Wl,-Bsymbolic-functions -lgmp -lcrypt -lm -lltdl
checking for guile headers...   -pthread
checking whether guile works... yes
checking for guile... /usr/bin/guile
checking for guile - 1.8.5 <= version < 99.99.99... yes: 1.8.7
checking if guile long_long is at least as big as gint64... yes
checking for scm_long_long2num in -lguile... yes
checking if unsigned long is at least as big as guint32... yes
checking if guile needs our copy of (guile www)... checking for guile... (cached) /usr/bin/guile
checking for guile-config... /usr/bin/guile-config
checking for guile-tools... /usr/bin/guile-tools
checking if (www main) is available... no
checking for gconf-2.0 >= 2.22... yes
checking GCONF_CFLAGS... -DORBIT2=1 -pthread -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
checking GCONF_LIBS... -lgconf-2 -lglib-2.0  
checking for gconftool-2... /usr/bin/gconftool-2
checking for libxml-2.0 >= 2.5.10... yes
checking LIBXML2_CFLAGS... -I/usr/include/libxml2  
checking LIBXML2_LIBS... -lxml2  
checking for xmlElemDump in -lxml2... yes
checking for gzopen in -lz... yes
checking dbi/dbi.h usability... yes
checking dbi/dbi.h presence... yes
checking for dbi/dbi.h... yes
checking whether to use OFX... yes -- automatic test
checking for libofx... yes
checking LIBOFX_CFLAGS...  
checking LIBOFX_LIBS... -lofx  
checking for nl_langinfo and D_FMT... yes
checking for a valid gettext/gmsgfmt installation... yes - /usr/bin/msgfmt
checking for perl... /usr/bin/perl
checking for doxygen... /usr/bin/doxygen
checking for dot... no
checking what warning flags to pass to the C compiler... -Wall -Wunused -Wmissing-prototypes -Wmissing-declarations
checking what language compliance flags to pass to the C compiler... 
checking for gtk+-2.0 >= 2.16... yes
checking GTK_CFLAGS... -pthread -D_REENTRANT -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/directfb -I/usr/include/libpng12  
checking GTK_LIBS... -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0  
checking for libgnomeui-2.0 >= 2.22... yes
checking GNOME_CFLAGS... -DORBIT2=1 -pthread -D_REENTRANT -I/usr/include/libgnomeui-2.0 -I/usr/include/libart-2.0 -I/usr/include/gconf/2 -I/usr/include/gnome-keyring-1 -I/usr/include/libgnome-2.0 -I/usr/include/libbonoboui-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/orbit-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libbonobo-2.0 -I/usr/include/bonobo-activation-2.0 -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/gail-1.0 -I/usr/include/freetype2 -I/usr/include/atk-1.0 -I/usr/lib/gtk-2.0/include -I/usr/include/cairo -I/usr/include/gio-unix-2.0/ -I/usr/include/pixman-1 -I/usr/include/directfb -I/usr/include/libpng12  
checking GNOME_LIBS... -pthread -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lgnomevfs-2 -lgnomecanvas-2 -lgnome-2 -lpopt -lbonobo-2 -lbonobo-activation -lORBit-2 -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgconf-2 -lgmodule-2.0 -lgobject-2.0 -lgthread-2.0 -lrt -lglib-2.0  
checking for gdk-pixbuf-2.0... yes
checking GDK_PIXBUF_CFLAGS... -pthread -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
checking GDK_PIXBUF_LIBS... -pthread -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0  
checking for libglade-2.0 >= 2.6... yes
checking GLADE_CFLAGS... -pthread -D_REENTRANT -I/usr/include/libglade-2.0 -I/usr/include/gtk-2.0 -I/usr/include/libxml2 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/directfb -I/usr/include/libpng12  
checking GLADE_LIBS... -pthread -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0  
checking for libgoffice-0.8 >= 0.7.0... yes
checking GOFFICE_CFLAGS... -pthread -D_REENTRANT -DORBIT2=1 -I/usr/include/libgoffice-0.8 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgsf-1 -I/usr/include/libxml2 -I/usr/include/gtk-2.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/gconf/2 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/gio-unix-2.0/ -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/directfb -I/usr/include/libpng12 -I/usr/include/orbit-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include  
checking GOFFICE_LIBS... -lgoffice-0.8  
checking the html engine... webkit
checking for webkit-1.0 >= "1.0"... no
Package webkit-1.0 was not found in the pkg-config search path. Perhaps you should add the directory containing `webkit-1.0.pc' to the PKG_CONFIG_PATH environment variable No package 'webkit-1.0' found
configure: error: Library requirements (webkit-1.0 >= "1.0") not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.
chuck@FEHU:~/development/gnucash$ make all install
make: *** No rule to make target `all'.  Stop.

