[paulr@localhost Desktop]$ su -
Password: 
[root@localhost ~]# clear
[root@localhost ~]# NM_SERIAL_DEBUG=1 /usr/sbin/NetworkManager --no-daemon > connect.txt
NetworkManager: <info>  starting...
-- Error received: File exists
-- Original message: type=0x14 length=56 flags=<REQUEST,ACK,ATOMIC> sequence-nr=1252840427 pid=4198643
NetworkManager: <WARN>  nm_generic_enable_loopback(): error -17 returned from rtnl_addr_add():
Sucess

NetworkManager: <info>  Found radio killswitch /org/freedesktop/Hal/devices/pci_8086_4229_rfkill_4965AGN_wlan
NetworkManager: <info>  (eth0): new Ethernet device (driver: 'sky2')
NetworkManager: <info>  (eth0): exported as /org/freedesktop/Hal/devices/net_00_1a_80_d5_4b_10
NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'iwlagn')
NetworkManager: <info>  (wlan0): exported as /org/freedesktop/Hal/devices/net_00_1f_3b_a4_60_f7
NetworkManager: <info>  (ttyUSB3): ignoring due to lack of mobile broadband capabilties
NetworkManager: <info>  (ttyUSB2): ignoring due to lack of mobile broadband capabilties
NetworkManager: <info>  (ttyUSB1): ignoring due to lack of mobile broadband capabilties
NetworkManager: <info>  (ttyUSB0): found serial port (udev:GSM  hal:GSM)
NetworkManager: <info>  (ttyUSB0): new Modem device (driver: 'option')
NetworkManager: <info>  (ttyUSB0): exported as /org/freedesktop/Hal/devices/usb_device_af0_6901_Serial_Number_if0_serial_usb_0
NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
NetworkManager: <info>  (eth0): bringing up device.
NetworkManager: <info>  (eth0): preparing device.
NetworkManager: <info>  (eth0): deactivating device (reason: 2).
NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
NetworkManager: <info>  (wlan0): bringing up device.
NetworkManager: <info>  (wlan0): preparing device.
NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
NetworkManager: <info>  (ttyUSB0): device state change: 1 -> 2 (reason 2)
NetworkManager: <info>  (ttyUSB0): deactivating device (reason: 2).
NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed
NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' failed
NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 0)
NetworkManager: <info>  (ttyUSB0): device state change: 2 -> 3 (reason 0)
NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
NetworkManager: <info>  Activation (wlan0) starting connection 'Auto CottsWoodDriveN'
NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
NetworkManager: <info>  Activation (wlan0/wireless): access point 'Auto CottsWoodDriveN' has security, but secrets are required.
NetworkManager: <info>  (wlan0): device state change: 5 -> 6 (reason 0)
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
NetworkManager: <info>  (wlan0): device state change: 6 -> 4 (reason 0)
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
NetworkManager: <info>  Activation (wlan0/wireless): connection 'Auto CottsWoodDriveN' has security, and secrets exist.  No new secrets needed.
NetworkManager: <info>  Config: added 'ssid' value 'CottsWoodDriveN'
NetworkManager: <info>  Config: added 'scan_ssid' value '1'
NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
NetworkManager: <info>  Config: added 'psk' value '<omitted>'
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> disconnected
NetworkManager: <info>  Config: set interface ap_scan to 1
NetworkManager: <info>  (wlan0): supplicant connection state:  disconnected -> scanning
^CNetworkManager: <WARN>  nm_signal_handler(): Caught signal 2, shutting down normally.
NetworkManager: <info>  (eth0): now unmanaged
NetworkManager: <info>  (eth0): device state change: 2 -> 1 (reason 36)
NetworkManager: <info>  (eth0): cleaning up...
NetworkManager: <info>  (eth0): taking down device.
NetworkManager: <info>  (wlan0): now unmanaged
NetworkManager: <info>  (wlan0): device state change: 5 -> 1 (reason 36)
NetworkManager: <info>  (wlan0): deactivating device (reason: 36).
NetworkManager: <info>  (wlan0): cleaning up...
NetworkManager: <info>  (wlan0): taking down device.
NetworkManager: <info>  (ttyUSB0): now unmanaged
NetworkManager: <info>  (ttyUSB0): device state change: 3 -> 1 (reason 36)
NetworkManager: <info>  (ttyUSB0): cleaning up...
NetworkManager: <info>  (ttyUSB0): taking down device.
NetworkManager: <info>  exiting (success)
[root@localhost ~]# ls
anaconda-ks.cfg  connect.txt  Desktop  Downloads  fails.txt  install.log  install.log.syslog
[root@localhost ~]# rm -rf connect.txt fails.txt 
[root@localhost ~]# ls
anaconda-ks.cfg  Desktop  Downloads  install.log  install.log.syslog
[root@localhost ~]# clear

[root@localhost ~]# NM_SERIAL_DEBUG=1 /usr/sbin/NetworkManager --no-daemon >> connect.txt
NetworkManager: <info>  starting...
-- Error received: File exists
-- Original message: type=0x14 length=56 flags=<REQUEST,ACK,ATOMIC> sequence-nr=1252840458 pid=4198665
NetworkManager: <WARN>  nm_generic_enable_loopback(): error -17 returned from rtnl_addr_add():
Sucess

NetworkManager: <info>  Found radio killswitch /org/freedesktop/Hal/devices/pci_8086_4229_rfkill_4965AGN_wlan
NetworkManager: <info>  (eth0): new Ethernet device (driver: 'sky2')
NetworkManager: <info>  (eth0): exported as /org/freedesktop/Hal/devices/net_00_1a_80_d5_4b_10
NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'iwlagn')
NetworkManager: <info>  (wlan0): exported as /org/freedesktop/Hal/devices/net_00_1f_3b_a4_60_f7
NetworkManager: <info>  (ttyUSB3): ignoring due to lack of mobile broadband capabilties
NetworkManager: <info>  (ttyUSB2): ignoring due to lack of mobile broadband capabilties
NetworkManager: <info>  (ttyUSB1): ignoring due to lack of mobile broadband capabilties
NetworkManager: <info>  (ttyUSB0): found serial port (udev:GSM  hal:GSM)
NetworkManager: <info>  (ttyUSB0): new Modem device (driver: 'option')
NetworkManager: <info>  (ttyUSB0): exported as /org/freedesktop/Hal/devices/usb_device_af0_6901_Serial_Number_if0_serial_usb_0
NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
NetworkManager: <info>  (eth0): bringing up device.
NetworkManager: <info>  (eth0): preparing device.
NetworkManager: <info>  (eth0): deactivating device (reason: 2).
NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
NetworkManager: <info>  (wlan0): bringing up device.
NetworkManager: <info>  (wlan0): preparing device.
NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
NetworkManager: <info>  (ttyUSB0): device state change: 1 -> 2 (reason 2)
NetworkManager: <info>  (ttyUSB0): deactivating device (reason: 2).
NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed
NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' failed
NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 0)
NetworkManager: <info>  (ttyUSB0): device state change: 2 -> 3 (reason 0)
NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
NetworkManager: <info>  Activation (wlan0) starting connection 'Auto CottsWoodDriveN'
NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
NetworkManager: <info>  Activation (wlan0/wireless): access point 'Auto CottsWoodDriveN' has security, but secrets are required.
NetworkManager: <info>  (wlan0): device state change: 5 -> 6 (reason 0)
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
NetworkManager: <info>  (wlan0): device state change: 6 -> 4 (reason 0)
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
NetworkManager: <info>  Activation (wlan0/wireless): connection 'Auto CottsWoodDriveN' has security, and secrets exist.  No new secrets needed.
NetworkManager: <info>  Config: added 'ssid' value 'CottsWoodDriveN'
NetworkManager: <info>  Config: added 'scan_ssid' value '1'
NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
NetworkManager: <info>  Config: added 'psk' value '<omitted>'
NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
NetworkManager: <info>  Config: set interface ap_scan to 1
NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> disconnected
NetworkManager: <info>  (wlan0): supplicant connection state:  disconnected -> scanning
NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> associating
NetworkManager: <info>  (wlan0): supplicant connection state:  associating -> associated
NetworkManager: <info>  (wlan0): supplicant connection state:  associated -> 4-way handshake
NetworkManager: <info>  (wlan0): supplicant connection state:  4-way handshake -> group handshake
NetworkManager: <info>  (wlan0): supplicant connection state:  group handshake -> completed
NetworkManager: <info>  Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'CottsWoodDriveN'.
NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
NetworkManager: <info>  (wlan0): device state change: 5 -> 7 (reason 0)
NetworkManager: <info>  Activation (wlan0) Beginning DHCP transaction.
NetworkManager: <info>  dhclient started with pid 4374
Internet Systems Consortium DHCP Client 4.1.0p1
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
NetworkManager: <info>  DHCP: device wlan0 state changed (null) -> preinit
Listening on LPF/wlan0/00:1f:3b:a4:60:f7
Sending on   LPF/wlan0/00:1f:3b:a4:60:f7
Sending on   Socket/fallback
DHCPREQUEST on wlan0 to 255.255.255.255 port 67
DHCPREQUEST on wlan0 to 255.255.255.255 port 67
DHCPREQUEST on wlan0 to 255.255.255.255 port 67
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
DHCPOFFER from 192.168.1.1
DHCPREQUEST on wlan0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
NetworkManager: <info>  DHCP: device wlan0 state changed preinit -> bound
NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP Configure Get) scheduled...
NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP Configure Get) started...
NetworkManager: <info>    address 192.168.1.100
NetworkManager: <info>    prefix 24 (255.255.255.0)
NetworkManager: <info>    gateway 192.168.1.1
NetworkManager: <info>    nameserver '192.168.1.1'
NetworkManager: <info>    nameserver '194.168.4.100'
NetworkManager: <info>    nameserver '194.168.8.100'
NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP Configure Get) complete.
NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
bound to 192.168.1.100 -- renewal in 41314 seconds.
NetworkManager: <info>  (wlan0): device state change: 7 -> 8 (reason 0)
NetworkManager: <info>  Policy set 'Auto CottsWoodDriveN' (wlan0) as default for routing and DNS.

