[    0.000000] Linux version 4.8.0-34-generic (buildd@lcy01-21) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #36-Ubuntu SMP Wed Dec 21 17:24:18 UTC 2016 (Ubuntu 4.8.0-34.36-generic 4.8.11)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-34-generic.efi.signed root=UUID=dcd15d42-dab2-491b-a088-76d49c34ce99 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b90fafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b90fb000-0x00000000b95fafff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000b95fb000-0x00000000b9c7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9c7f000-0x00000000b9e7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b9e7f000-0x00000000b9efefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b9eff000-0x00000000b9efffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9f00000-0x00000000be7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by HP
[    0.000000] efi:  ACPI=0xb9efe000  ACPI 2.0=0xb9efe014  SMBIOS=0xb98db000  MPS=0xb995b000  ESRT=0xb907b660 
[    0.000000] efi: requested map not found.
[    0.000000] esrt: ESRT header is not in the memory map.
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: HP HP ProDesk 600 G2 DM/8169, BIOS N22 Ver. 02.11 04/08/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00BC000000 mask 7FFC000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xb9f00 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff8d4680097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1c5a3c000, 0x1c5a3cfff] PGTABLE
[    0.000000] BRK [0x1c5a3d000, 0x1c5a3dfff] PGTABLE
[    0.000000] BRK [0x1c5a3e000, 0x1c5a3efff] PGTABLE
[    0.000000] BRK [0x1c5a3f000, 0x1c5a3ffff] PGTABLE
[    0.000000] BRK [0x1c5a40000, 0x1c5a40fff] PGTABLE
[    0.000000] BRK [0x1c5a41000, 0x1c5a41fff] PGTABLE
[    0.000000] BRK [0x1c5a42000, 0x1c5a42fff] PGTABLE
[    0.000000] BRK [0x1c5a43000, 0x1c5a43fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3314c000-0x3589dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000B9EFE014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000B9EFD0E8 0000B4 (v01 HPQOEM SLIC-BPC 00000000      01000013)
[    0.000000] ACPI: FACP 0x00000000B9EF0000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP   00000001)
[    0.000000] ACPI: DSDT 0x00000000B9ECE000 01E13B (v02 HPQOEM 8169     00000000 INTL 20121018)
[    0.000000] ACPI: FACS 0x00000000B9E6E000 000040
[    0.000000] ACPI: SSDT 0x00000000B9EFC000 000108 (v02 HP     ShmTable 00000001 INTL 20121018)
[    0.000000] ACPI: TCPA 0x00000000B9EFB000 000032 (v02 HPQOEM EDK2     00000002      01000013)
[    0.000000] ACPI: SSDT 0x00000000B9EFA000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018)
[    0.000000] ACPI: UEFI 0x00000000B9E7A000 000042 (v01 HPQOEM EDK2     00000002      01000013)
[    0.000000] ACPI: SSDT 0x00000000B9EF4000 0051FA (v02 SaSsdt SaSsdt   00003000 INTL 20121018)
[    0.000000] ACPI: SSDT 0x00000000B9EF3000 0005B1 (v01 Intel  PerfTune 00001000 INTL 20121018)
[    0.000000] ACPI: MSDM 0x00000000B9EF2000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP   00000001)
[    0.000000] ACPI: SLIC 0x00000000B9EF1000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP   00000001)
[    0.000000] ACPI: HPET 0x00000000B9EEF000 000038 (v01 HPQOEM 8169     00000001 HP   00000001)
[    0.000000] ACPI: APIC 0x00000000B9EEE000 0000BC (v01 HPQOEM 8169     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x00000000B9EED000 00003C (v01 HPQOEM 8169     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x00000000B9ECD000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018)
[    0.000000] ACPI: SSDT 0x00000000B9ECC000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018)
[    0.000000] ACPI: SSDT 0x00000000B9ECB000 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20121018)
[    0.000000] ACPI: ASF! 0x00000000B9ECA000 0000A5 (v32 HPQOEM  UYA     00000001 TFSM 000F4240)
[    0.000000] ACPI: FPDT 0x00000000B9EC9000 000044 (v01 HPQOEM EDK2     00000002      01000013)
[    0.000000] ACPI: BGRT 0x00000000B9EC8000 000038 (v01 HPQOEM EDK2     00000002      01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23f7fb000-0x23f7fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023f7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b90fafff]
[    0.000000]   node   0: [mem 0x00000000b9eff000-0x00000000b9efffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023f7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023f7fffff]
[    0.000000] On node 0 totalpages: 2066585
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 25 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11780 pages used for memmap
[    0.000000]   DMA32 zone: 753916 pages, LIFO batch:31
[    0.000000]   Normal zone: 20448 pages used for memmap
[    0.000000]   Normal zone: 1308672 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000bc800000-0x00000000be7fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb90fb000-0xb95fafff]
[    0.000000] PM: Registered nosave memory: [mem 0xb95fb000-0xb9c7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9c7f000-0xb9e7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9e7f000-0xb9efefff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9f00000-0xbe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe800000-0xf80f9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[    0.000000] e820: [mem 0xbe800000-0xf80f9fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff8d48bf400000 s107864 r8192 d31400 u262144
[    0.000000] pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2034268
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-34-generic.efi.signed root=UUID=dcd15d42-dab2-491b-a088-76d49c34ce99 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7777944K/8266340K available (8836K kernel code, 1439K rwdata, 3812K rodata, 1556K init, 1296K bss, 488396K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:2048 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 3200.000 MHz processor
[    0.000017] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.00 BogoMIPS (lpj=12768000)
[    0.000019] pid_max: default: 32768 minimum: 301
[    0.000026] ACPI: Core revision 20160422
[    0.025734] ACPI: 8 ACPI AML tables successfully acquired and loaded

[    0.025968] Security Framework initialized
[    0.025968] Yama: becoming mindful.
[    0.025979] AppArmor: AppArmor initialized
[    0.026279] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.027348] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.027820] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.027825] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028025] CPU: Physical Processor ID: 0
[    0.028025] CPU: Processor Core ID: 0
[    0.028028] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028028] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028031] mce: CPU supports 8 MCE banks
[    0.028038] CPU0: Thermal monitoring enabled (TM1)
[    0.028050] process: using mwait in idle threads
[    0.028051] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.028052] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.028383] Freeing SMP alternatives memory: 32K (ffffffffb7cee000 - ffffffffb7cf6000)
[    0.034098] ftrace: allocating 33385 entries in 131 pages
[    0.045154] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.045154] smpboot: Max logical packages: 4
[    0.046380] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.050744] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.090436] TSC deadline timer enabled
[    0.090441] smpboot: CPU0: Intel(R) Core(TM) i3-6100T CPU @ 3.20GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.090443] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.090467] ... version:                4
[    0.090467] ... bit width:              48
[    0.090468] ... generic registers:      4
[    0.090468] ... value mask:             0000ffffffffffff
[    0.090469] ... max period:             0000ffffffffffff
[    0.090469] ... fixed-purpose events:   3
[    0.090469] ... event mask:             000000070000000f
[    0.091085] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.091133] x86: Booting SMP configuration:
[    0.091134] .... node  #0, CPUs:      #1 #2 #3
[    0.098486] x86: Booted up 1 node, 4 CPUs
[    0.098487] smpboot: Total of 4 processors activated (25536.00 BogoMIPS)
[    0.101375] devtmpfs: initialized
[    0.101416] x86/mm: Memory block size: 128MB
[    0.102994] evm: security.selinux
[    0.102994] evm: security.SMACK64
[    0.102994] evm: security.SMACK64EXEC
[    0.102995] evm: security.SMACK64TRANSMUTE
[    0.102995] evm: security.SMACK64MMAP
[    0.102995] evm: security.ima
[    0.102996] evm: security.capability
[    0.103030] PM: Registering ACPI NVS region [mem 0xb9c7f000-0xb9e7efff] (2097152 bytes)
[    0.103081] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.103109] pinctrl core: initialized pinctrl subsystem
[    0.103255] RTC time:  1:06:25, date: 01/24/17
[    0.103314] NET: Registered protocol family 16
[    0.117132] cpuidle: using governor ladder
[    0.133145] cpuidle: using governor menu
[    0.133147] PCCT header not found.
[    0.133220] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.133221] ACPI: bus type PCI registered
[    0.133222] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.133271] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.133272] PCI: not using MMCONFIG
[    0.133272] PCI: Using configuration type 1 for base access
[    0.149268] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.149268] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.149406] ACPI: Added _OSI(Module Device)
[    0.149407] ACPI: Added _OSI(Processor Device)
[    0.149407] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.149408] ACPI: Added _OSI(Processor Aggregator Device)
[    0.149791] ACPI: Executed 4 blocks of module-level executable AML code
[    0.156320] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.158555] ACPI: Dynamic OEM Table Load:
[    0.158571] ACPI: SSDT 0xFFFF8D48B5601800 0006A2 (v02 PmRef  Cpu0Ist  00003000 INTL 20121018)
[    0.159178] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.159797] ACPI: Dynamic OEM Table Load:
[    0.159802] ACPI: SSDT 0xFFFF8D48B563EC00 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20121018)
[    0.160752] ACPI: Dynamic OEM Table Load:
[    0.160757] ACPI: SSDT 0xFFFF8D48B5607000 0005AA (v02 PmRef  ApIst    00003000 INTL 20121018)
[    0.161555] ACPI: Dynamic OEM Table Load:
[    0.161558] ACPI: SSDT 0xFFFF8D48B56B0800 000119 (v02 PmRef  ApCst    00003000 INTL 20121018)
[    0.163017] ACPI : EC: EC started
[    0.163035] ACPI: Interpreter enabled
[    0.163070] ACPI: (supports S0 S3 S4 S5)
[    0.163070] ACPI: Using IOAPIC for interrupt routing
[    0.163099] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.163734] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.163739] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.164573] ACPI: Power Resource [PG01] (on)
[    0.164868] ACPI: Power Resource [PG02] (on)
[    0.165172] ACPI: Power Resource [PG00] (on)
[    0.169484] ACPI: Power Resource [WRST] (off)
[    0.169781] ACPI: Power Resource [WRST] (off)
[    0.170079] ACPI: Power Resource [WRST] (off)
[    0.170377] ACPI: Power Resource [WRST] (off)
[    0.170674] ACPI: Power Resource [WRST] (off)
[    0.170992] ACPI: Power Resource [WRST] (off)
[    0.171290] ACPI: Power Resource [WRST] (off)
[    0.171591] ACPI: Power Resource [WRST] (off)
[    0.171888] ACPI: Power Resource [WRST] (off)
[    0.172185] ACPI: Power Resource [WRST] (off)
[    0.172481] ACPI: Power Resource [WRST] (off)
[    0.172776] ACPI: Power Resource [WRST] (off)
[    0.173072] ACPI: Power Resource [WRST] (off)
[    0.173372] ACPI: Power Resource [WRST] (off)
[    0.173670] ACPI: Power Resource [WRST] (off)
[    0.173965] ACPI: Power Resource [WRST] (off)
[    0.174261] ACPI: Power Resource [WRST] (off)
[    0.174561] ACPI: Power Resource [WRST] (off)
[    0.174864] ACPI: Power Resource [WRST] (off)
[    0.175163] ACPI: Power Resource [WRST] (off)
[    0.177270] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.177273] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.179638] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.179639] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.181213] PCI host bridge to bus 0000:00
[    0.181214] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.181215] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.181216] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.181217] pci_bus 0000:00: root bus resource [mem 0xbe800000-0xf7ffffff window]
[    0.181217] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.181218] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.181224] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[    0.181838] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[    0.181844] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
[    0.181849] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.181852] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.182524] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.182539] pci 0000:00:14.0: reg 0x10: [mem 0xd1120000-0xd112ffff 64bit]
[    0.182595] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.183195] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.183226] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.183240] pci 0000:00:14.2: reg 0x10: [mem 0xd114b000-0xd114bfff 64bit]
[    0.183897] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.183915] pci 0000:00:16.0: reg 0x10: [mem 0xd114c000-0xd114cfff 64bit]
[    0.183980] pci 0000:00:16.0: PME# supported from D3hot
[    0.184599] pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002
[    0.184609] pci 0000:00:16.3: reg 0x10: [io  0x3080-0x3087]
[    0.184613] pci 0000:00:16.3: reg 0x14: [mem 0xd114a000-0xd114afff]
[    0.185257] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.185268] pci 0000:00:17.0: reg 0x10: [mem 0xd1148000-0xd1149fff]
[    0.185274] pci 0000:00:17.0: reg 0x14: [mem 0xd114f000-0xd114f0ff]
[    0.185280] pci 0000:00:17.0: reg 0x18: [io  0x3088-0x308f]
[    0.185286] pci 0000:00:17.0: reg 0x1c: [io  0x3090-0x3093]
[    0.185291] pci 0000:00:17.0: reg 0x20: [io  0x3040-0x305f]
[    0.185297] pci 0000:00:17.0: reg 0x24: [mem 0xd114d000-0xd114d7ff]
[    0.185330] pci 0000:00:17.0: PME# supported from D3hot
[    0.185954] pci 0000:00:1c.0: [8086:a115] type 01 class 0x060400
[    0.186009] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.186617] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.186672] pci 0000:00:1f.0: [8086:a147] type 00 class 0x060100
[    0.187341] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.187349] pci 0000:00:1f.2: reg 0x10: [mem 0xd1140000-0xd1143fff]
[    0.187994] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.188012] pci 0000:00:1f.3: reg 0x10: [mem 0xd1144000-0xd1147fff 64bit]
[    0.188034] pci 0000:00:1f.3: reg 0x20: [mem 0xd1130000-0xd113ffff 64bit]
[    0.188075] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.188691] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.188726] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.188766] pci 0000:00:1f.4: reg 0x10: [mem 0xd114e000-0xd114e0ff 64bit]
[    0.188817] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.189496] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
[    0.189516] pci 0000:00:1f.6: reg 0x10: [mem 0xd1100000-0xd111ffff]
[    0.189619] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.190216] pci 0000:00:1f.6: System wakeup disabled by ACPI
[    0.190309] pci 0000:01:00.0: [8086:095a] type 00 class 0x028000
[    0.190339] pci 0000:01:00.0: reg 0x10: [mem 0xd1000000-0xd1001fff 64bit]
[    0.190494] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.190577] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.201230] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.201249] pci 0000:00:1c.0:   bridge window [mem 0xd1000000-0xd10fffff]
[    0.202064] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.202107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.202149] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.202191] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.202234] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.202276] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.202318] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.202360] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.202521] ACPI: Enabled 3 GPEs in block 00 to 7F
[    0.202545] ACPI : EC: EC stopped
[    0.202552] ACPI : EC: GPE = 0x6e, I/O: command/status = 0x66, data = 0x62
[    0.202553] ACPI : EC: EC started
[    0.202701] SCSI subsystem initialized
[    0.202726] libata version 3.00 loaded.
[    0.202748] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.202749] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.202750] vgaarb: loaded
[    0.202751] vgaarb: bridge control possible 0000:00:02.0
[    0.202763] ACPI: bus type USB registered
[    0.202772] usbcore: registered new interface driver usbfs
[    0.202777] usbcore: registered new interface driver hub
[    0.202788] usbcore: registered new device driver usb
[    0.225329] PCI: Using ACPI for IRQ routing
[    0.232359] PCI: pci_cache_line_size set to 64 bytes
[    0.232410] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.232411] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.232411] e820: reserve RAM buffer [mem 0xb90fb000-0xbbffffff]
[    0.232412] e820: reserve RAM buffer [mem 0xb9f00000-0xbbffffff]
[    0.232412] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff]
[    0.232472] NetLabel: Initializing
[    0.232472] NetLabel:  domain hash size = 128
[    0.232472] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.232481] NetLabel:  unlabeled traffic allowed by default
[    0.232578] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.232581] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.234626] clocksource: Switched to clocksource hpet
[    0.239278] VFS: Disk quotas dquot_6.6.0
[    0.239289] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.239348] AppArmor: AppArmor Filesystem Enabled
[    0.239374] pnp: PnP ACPI init
[    0.239485] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.239486] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.239487] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.239488] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.239489] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.239491] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.239708] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.239710] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.239812] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.239812] system 00:02: [io  0xffff] has been reserved
[    0.239813] system 00:02: [io  0xffff] has been reserved
[    0.239814] system 00:02: [io  0xffff] has been reserved
[    0.239815] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.239815] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.239817] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.239882] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.239883] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.239899] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.239923] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.239924] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.240035] system 00:06: [io  0x0200-0x023f] has been reserved
[    0.240036] system 00:06: [mem 0xfedb0000-0xfedbffff] has been reserved
[    0.240037] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.240260] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.240261] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.240262] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.240263] system 00:07: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.240264] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.240264] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.240265] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.240266] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.240267] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.240268] system 00:07: [mem 0xbe800000-0xbe81ffff] has been reserved
[    0.240269] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.240446] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.240483] pnp: PnP ACPI: found 9 devices
[    0.247351] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.247365] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.247368] pci 0000:00:1c.0:   bridge window [mem 0xd1000000-0xd10fffff]
[    0.247374] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.247375] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.247375] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.247376] pci_bus 0000:00: resource 7 [mem 0xbe800000-0xf7ffffff window]
[    0.247377] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.247377] pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd10fffff]
[    0.247397] NET: Registered protocol family 2
[    0.247508] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.247584] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.247658] TCP: Hash tables configured (established 65536 bind 65536)
[    0.247671] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.247685] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.247719] NET: Registered protocol family 1
[    0.247727] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.247931] PCI: CLS 0 bytes, default 64
[    0.247955] Trying to unpack rootfs image as initramfs...
[    0.709178] Freeing initrd memory: 40264K (ffff8d46b314c000 - ffff8d46b589e000)
[    0.709180] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.709182] software IO TLB [mem 0xa6adc000-0xaaadc000] (64MB) mapped at [ffff8d4726adc000-ffff8d472aadbfff]
[    0.709383] Scanning for low memory corruption every 60 seconds
[    0.709661] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.709678] audit: initializing netlink subsys (disabled)
[    0.709689] audit: type=2000 audit(1485219984.700:1): initialized
[    0.709967] Initialise system trusted keyrings
[    0.710052] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.711083] zbud: loaded
[    0.711350] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.711523] fuse init (API version 7.25)
[    0.711628] Allocating IMA blacklist keyring.
[    0.713547] Key type asymmetric registered
[    0.713547] Asymmetric key parser 'x509' registered
[    0.713568] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.713614] io scheduler noop registered
[    0.713615] io scheduler deadline registered (default)
[    0.713619] io scheduler cfq registered
[    0.713884] aer 0000:00:1c.0:pcie002: service driver aer loaded
[    0.713896] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.713897] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.713899] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    0.713904] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.713907] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.713925] efifb: probing for efifb
[    0.713933] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[    0.713934] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.713934] efifb: scrolling: redraw
[    0.713935] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.714011] Console: switching to colour frame buffer device 128x48
[    0.714020] fb0: EFI VGA frame buffer device
[    0.714023] intel_idle: MWAIT substates: 0x142120
[    0.714024] intel_idle: v0.4.1 model 0x5E
[    0.714150] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.714208] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.714210] ACPI: Sleep Button [SLPB]
[    0.714231] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.714232] ACPI: Power Button [PWRB]
[    0.714253] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.714254] ACPI: Power Button [PWRF]
[    0.714490] GHES: HEST is not enabled!
[    0.714552] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.715817] serial 0000:00:16.3: enabling device (0000 -> 0003)
[    0.736285] 0000:00:16.3: ttyS4 at I/O 0x3080 (irq = 19, base_baud = 115200) is a 16550A
[    0.736488] Linux agpgart interface v0.103
[    0.782994] tpm_tis 00:08: 1.2 TPM (device-id 0x1B, rev-id 16)
[    1.166985] tpm tpm0: TPM is disabled/deactivated (0x7)
[    1.169646] brd: module loaded
[    1.170562] loop: module loaded
[    1.170698] libphy: Fixed MDIO Bus: probed
[    1.170699] tun: Universal TUN/TAP device driver, 1.6
[    1.170699] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.170732] PPP generic driver version 2.4.2
[    1.170766] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.170767] ehci-pci: EHCI PCI platform driver
[    1.170774] ehci-platform: EHCI generic platform driver
[    1.170783] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.170784] ohci-pci: OHCI PCI platform driver
[    1.170789] ohci-platform: OHCI generic platform driver
[    1.170792] uhci_hcd: USB Universal Host Controller Interface driver
[    1.170936] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.170940] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.172020] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.172023] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.172086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.172087] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.172087] usb usb1: Product: xHCI Host Controller
[    1.172088] usb usb1: Manufacturer: Linux 4.8.0-34-generic xhci-hcd
[    1.172089] usb usb1: SerialNumber: 0000:00:14.0
[    1.172168] hub 1-0:1.0: USB hub found
[    1.172185] hub 1-0:1.0: 16 ports detected
[    1.181285] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.181287] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.181308] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.181309] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.181310] usb usb2: Product: xHCI Host Controller
[    1.181310] usb usb2: Manufacturer: Linux 4.8.0-34-generic xhci-hcd
[    1.181311] usb usb2: SerialNumber: 0000:00:14.0
[    1.181385] hub 2-0:1.0: USB hub found
[    1.181397] hub 2-0:1.0: 8 ports detected
[    1.185393] usb: port power management may be unreliable
[    1.186069] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.194103] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.194105] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.194232] mousedev: PS/2 mouse device common for all mice
[    1.194431] rtc_cmos 00:04: RTC can wake from S4
[    1.194890] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.194971] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.194975] i2c /dev entries driver
[    1.195009] device-mapper: uevent: version 1.0.3
[    1.195069] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.195071] intel_pstate: Intel P-state driver initializing
[    1.195351] intel_pstate: HWP enabled
[    1.195499] ledtrig-cpu: registered to indicate activity on CPUs
[    1.195500] EFI Variables Facility v0.08 2004-May-17
[    1.221384] NET: Registered protocol family 10
[    1.221545] NET: Registered protocol family 17
[    1.221549] Key type dns_resolver registered
[    1.221686] microcode: sig=0x506e3, pf=0x2, revision=0x76
[    1.221749] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.221920] registered taskstats version 1
[    1.221922] Loading compiled-in X.509 certificates
[    1.223730] Loaded X.509 cert 'Build time autogenerated kernel key: fa0a468f3374d9e18aac93890ca6a40c266c58ec'
[    1.223747] zswap: loaded using pool lzo/zbud
[    1.233532] Key type big_key registered
[    1.235003] Key type trusted registered
[    1.236093] Key type encrypted registered
[    1.236095] AppArmor: AppArmor sha1 policy hashing enabled
[    1.283011] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[    1.283014] ima: No TPM chip found, activating TPM-bypass!
[    1.283032] evm: HMAC attrs: 0x1
[    1.283620]   Magic number: 1:938:104
[    1.283799] rtc_cmos 00:04: setting system clock to 2017-01-24 01:06:26 UTC (1485219986)
[    1.283875] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.283875] EDD information not available.
[    1.283910] PM: Hibernation image not present or could not be loaded.
[    1.284663] Freeing unused kernel memory: 1556K (ffffffffb7b69000 - ffffffffb7cee000)
[    1.284663] Write protecting the kernel read-only data: 14336k
[    1.284922] Freeing unused kernel memory: 1388K (ffff8d48450a5000 - ffff8d4845200000)
[    1.285294] Freeing unused kernel memory: 284K (ffff8d48455b9000 - ffff8d4845600000)
[    1.290314] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.297147] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.297185] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.297190] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.298265] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.298281] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.298948] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.298977] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.299195] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.299222] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.299250] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.318332] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.333003] wmi: Mapper loaded
[    1.336533] [drm] Initialized drm 1.1.0 20060810
[    1.336543] ahci 0000:00:17.0: version 3.0
[    1.336748] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[    1.336793] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.336795] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part ems deso sadm sds apst 
[    1.338162] pps_core: LinuxPPS API ver. 1 registered
[    1.338162] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.339357] PTP clock support registered
[    1.345202] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.345202] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.399710] scsi host0: ahci
[    1.399945] scsi host1: ahci
[    1.400122] scsi host2: ahci
[    1.400269] scsi host3: ahci
[    1.400409] scsi host4: ahci
[    1.400541] scsi host5: ahci
[    1.400578] ata1: SATA max UDMA/133 abar m2048@0xd114d000 port 0xd114d100 irq 122
[    1.400581] ata2: SATA max UDMA/133 abar m2048@0xd114d000 port 0xd114d180 irq 122
[    1.400583] ata3: SATA max UDMA/133 abar m2048@0xd114d000 port 0xd114d200 irq 122
[    1.400584] ata4: SATA max UDMA/133 abar m2048@0xd114d000 port 0xd114d280 irq 122
[    1.400585] ata5: SATA max UDMA/133 abar m2048@0xd114d000 port 0xd114d300 irq 122
[    1.400590] ata6: SATA max UDMA/133 abar m2048@0xd114d000 port 0xd114d380 irq 122
[    1.400830] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.478300] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    1.506929] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.544231] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) fc:3f:db:08:c4:7a
[    1.544233] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    1.544307] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[    1.544860] e1000e 0000:00:1f.6 eno1: renamed from eth0
[    1.545267] [drm] Memory usable by graphics device = 4096M
[    1.545268] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    1.545269] fb: switching to inteldrmfb from EFI VGA
[    1.545283] Console: switching to colour dummy device 80x25
[    1.545335] [drm] Replacing VGA console driver
[    1.603492] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.603493] [drm] Driver supports precise vblank timestamp query.
[    1.615530] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.615767] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[    1.617168] [drm] GuC firmware load skipped
[    1.623242] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.623640] acpi device:07: registered as cooling_device4
[    1.623732] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.623822] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[    1.642160] i915 0000:00:02.0: No connectors reported connected with modes
[    1.642163] [drm] Cannot find any crtc or sizes - going 1024x768
[    1.642492] fbcon: inteldrmfb (fb0) is primary device
[    1.642530] Console: switching to colour frame buffer device 128x48
[    1.642539] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.650200] usb 1-1: New USB device found, idVendor=2109, idProduct=2812
[    1.650201] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.650202] usb 1-1: Product: USB2.0 Hub             
[    1.650202] usb 1-1: Manufacturer: VIA Labs, Inc.         
[    1.650716] hub 1-1:1.0: USB hub found
[    1.650858] hub 1-1:1.0: 4 ports detected
[    1.711951] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.713422] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[    1.713423] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.713776] ata1.00: ATA-9: HGST HTS725050A7E630, GS2OA3C0, max UDMA/133
[    1.713778] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.715535] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[    1.715536] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.715895] ata1.00: configured for UDMA/133
[    1.716155] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS725050A7 A3C0 PQ: 0 ANSI: 5
[    1.730946] tsc: Refined TSC clocksource calibration: 3192.013 MHz
[    1.730951] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02d108a33, max_idle_ns: 440795353234 ns
[    1.747079] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.747080] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.747081] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.747103] sd 0:0:0:0: [sda] Write Protect is off
[    1.747104] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.747114] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.767027] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.787814]  sda: sda1 sda2 < sda5 sda6 >
[    1.788634] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.020448] usb 2-1: New USB device found, idVendor=2109, idProduct=0812
[    2.020449] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.020450] usb 2-1: Product: USB3.0 Hub             
[    2.020451] usb 2-1: Manufacturer: VIA Labs, Inc.         
[    2.022339] hub 2-1:1.0: USB hub found
[    2.022518] hub 2-1:1.0: 4 ports detected
[    2.060317] ata2: SATA link down (SStatus 4 SControl 300)
[    2.138681] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    2.281138] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
[    2.281140] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.370891] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
[    2.373100] ata3: SATA link down (SStatus 4 SControl 300)
[    2.496085] usb 1-1.3: New USB device found, idVendor=1656, idProduct=0007
[    2.496087] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.496087] usb 1-1.3: Product: Q-SYS TSC-7t
[    2.496088] usb 1-1.3: Manufacturer: QSC, LLC
[    2.496089] usb 1-1.3: SerialNumber: TSC7-P1EP1E-L2L2-VB-ea6427eff4
[    2.563252] usb 2-1.4: new SuperSpeed USB device number 3 using xhci_hcd
[    2.689992] ata4: SATA link down (SStatus 4 SControl 300)
[    2.754926] clocksource: Switched to clocksource tsc
[    2.815967] usb 2-1.4: New USB device found, idVendor=2109, idProduct=0812
[    2.815981] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.815982] usb 2-1.4: Product: USB3.0 Hub             
[    2.815983] usb 2-1.4: Manufacturer: VIA Labs, Inc.         
[    2.818553] hub 2-1.4:1.0: USB hub found
[    2.818939] hub 2-1.4:1.0: 4 ports detected
[    2.819404] [drm] RC6 on
[    2.906745] usb 1-1.4: new high-speed USB device number 5 using xhci_hcd
[    3.007642] ata5: SATA link down (SStatus 4 SControl 300)
[    3.022161] usb 1-1.4: New USB device found, idVendor=2109, idProduct=2812
[    3.022163] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.022164] usb 1-1.4: Product: USB2.0 Hub             
[    3.022164] usb 1-1.4: Manufacturer: VIA Labs, Inc.         
[    3.022809] hub 1-1.4:1.0: USB hub found
[    3.023006] hub 1-1.4:1.0: 4 ports detected
[    3.320116] ata6: SATA link down (SStatus 4 SControl 300)
[    3.330705] usb 1-1.4.1: new high-speed USB device number 6 using xhci_hcd
[    3.455963] usb 1-1.4.1: New USB device found, idVendor=1656, idProduct=0009
[    3.455964] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.455965] usb 1-1.4.1: Product: Q-SYS I/O USB Bridge
[    3.455966] usb 1-1.4.1: Manufacturer: QSC, LLC
[    3.455966] usb 1-1.4.1: SerialNumber: USBBRIDGE-P1EP1E-L2L2-VB-abd98b6d88
[    3.469645] random: fast init done
[    3.574830] usb 1-1.4.3: new high-speed USB device number 7 using xhci_hcd
[    3.704054] usb 1-1.4.3: New USB device found, idVendor=1656, idProduct=0007
[    3.704055] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.704056] usb 1-1.4.3: Product: Q-SYS TSC-7t
[    3.704057] usb 1-1.4.3: Manufacturer: QSC, LLC
[    3.704058] usb 1-1.4.3: SerialNumber: TSC7-P1EP1E-L2L2-VB-07c034a46d
[    3.766948] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    4.661131] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.812224] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.812322] systemd[1]: Detected architecture x86-64.
[    4.830857] systemd[1]: Set hostname to <TSC7TEST>.
[    5.276404] random: crng init done
[    5.587707] systemd[1]: cgproxy.service: Cannot add dependency job, ignoring: Unit cgproxy.service is masked.
[    5.587709] systemd[1]: cgmanager.service: Cannot add dependency job, ignoring: Unit cgmanager.service is masked.
[    5.587718] systemd[1]: openvpn.service: Cannot add dependency job, ignoring: Unit openvpn.service is masked.
[    5.587743] systemd[1]: click-system-hooks.service: Cannot add dependency job, ignoring: Unit click-system-hooks.service is masked.
[    5.587753] systemd[1]: gpu-manager.service: Cannot add dependency job, ignoring: Unit gpu-manager.service is masked.
[    5.588124] systemd[1]: Listening on udev Kernel Socket.
[    5.588162] systemd[1]: Reached target Remote File Systems.
[    6.147824] lp: driver loaded but no devices found
[    6.166988] ppdev: user-space parallel port driver
[    7.508634] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[    7.592239] systemd-journald[279]: Received request to flush runtime journal from PID 1
[    7.973808] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.011196] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    8.157830] Bluetooth: Core ver 2.21
[    8.157837] NET: Registered protocol family 31
[    8.157837] Bluetooth: HCI device and connection manager initialized
[    8.157839] Bluetooth: HCI socket layer initialized
[    8.157840] Bluetooth: L2CAP socket layer initialized
[    8.157843] Bluetooth: SCO socket layer initialized
[    8.227511] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    8.227512] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    8.227513] RAPL PMU: hw unit of domain package 2^-14 Joules
[    8.227513] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    8.227514] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    8.227514] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    8.281834] Intel(R) Wireless WiFi driver for Linux
[    8.281835] Copyright(c) 2003- 2015 Intel Corporation
[    8.281882] iwlwifi 0000:01:00.0: enabling device (0100 -> 0102)
[    8.355999] usbcore: registered new interface driver btusb
[    8.361491] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[    8.362821] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[    8.373954] Bluetooth: hci0: read Intel version: 370810011003110e25
[    8.373955] Bluetooth: hci0: Intel device is already patched. patch num: 25
[    8.458601] iwlwifi 0000:01:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[    8.490223] snd_hda_intel 0000:00:1f.3: enabling device (0100 -> 0102)
[    8.490357] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.655417] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC221: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    8.655418] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.655419] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.655420] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.655420] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.655421] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
[    8.689674] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[    8.689709] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    8.689739] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    8.689770] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    8.689800] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    8.726341] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[    8.728399] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[    8.728572] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[    8.812002] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    8.925703] AVX2 version of gcm_enc/dec engaged.
[    8.925704] AES CTR mode by8 optimization enabled
[    9.168873] media: loading out-of-tree module taints kernel.
[    9.168898] media: module verification failed: signature and/or required key missing - tainting kernel
[    9.169194] media: Linux media interface: v0.10
[    9.298091] usbcore: registered new interface driver snd-usb-audio
[    9.334104] kvm: disabled by bios
[    9.371203] kvm: disabled by bios
[    9.423390] kvm: disabled by bios
[    9.467359] kvm: disabled by bios
[    9.485811] intel_rapl: Found RAPL domain package
[    9.485813] intel_rapl: Found RAPL domain core
[    9.485815] intel_rapl: Found RAPL domain uncore
[    9.485817] intel_rapl: Found RAPL domain dram
[    9.546380] Linux video capture interface: v2.00
[    9.546381] WARNING: You are using an experimental version of the media stack.
               	As the driver is backported to an older kernel, it doesn't offer
               	enough quality for its usage in production.
               	Use it with care.
               Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
               	40eca140c404505c09773d1c6685d818cb55ab1a [media] mn88473: add DVB-T2 PLP support
               	bd361f5de2b338218c276d17a510701a16075deb Merge tag 'v4.10-rc1' into patchwork
               	7ce7d89f48834cefece7804d38fc5d85382edf77 Linux 4.10-rc1
[    9.898921] uvcvideo: Found UVC 1.10 device Q-SYS TSC-7t (1656:0007)
[    9.916928] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[    9.916966] uvcvideo: Found UVC 1.10 device Q-SYS I/O USB Bridge (1656:0009)
[    9.935928] uvcvideo 1-1.4.1:1.0: Entity type for entity Camera 1 was not initialized!
[    9.935979] uvcvideo: Found UVC 1.10 device Q-SYS TSC-7t (1656:0007)
[    9.953894] uvcvideo 1-1.4.3:1.0: Entity type for entity Camera 1 was not initialized!
[    9.953943] usbcore: registered new interface driver uvcvideo
[    9.953944] USB Video Class driver (1.1.1)
[    9.965603] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8d48b101f990 (20160422/exresop-593)
[    9.965606] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160422/dswexec-460)
[    9.965609] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff8d48b68acc80), AE_AML_OPERAND_TYPE (20160422/psparse-542)
[    9.965612] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff8d48b68ac370), AE_AML_OPERAND_TYPE (20160422/psparse-542)
[    9.966128] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8d48b101fcf0 (20160422/exresop-593)
[    9.966130] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160422/dswexec-460)
[    9.966132] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff8d48b68acc80), AE_AML_OPERAND_TYPE (20160422/psparse-542)
[    9.966135] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff8d48b68ac370), AE_AML_OPERAND_TYPE (20160422/psparse-542)
[    9.966643] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8d48b101f1f8 (20160422/exresop-593)
[    9.966644] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160422/dswexec-460)
[    9.966646] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff8d48b68acc80), AE_AML_OPERAND_TYPE (20160422/psparse-542)
[    9.966649] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff8d48b68ac370), AE_AML_OPERAND_TYPE (20160422/psparse-542)
[    9.966691] input: HP WMI hotkeys as /devices/virtual/input/input12
[    9.967991] hp_wmi: query 0x5 returned error 0x3
[    9.968044] ACPI Error: Attempt to CreateField of length zero (20160422/dsopcode-168)
[    9.968047] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPI] (Node ffff8d48b68ac2d0), AE_AML_OPERAND_VALUE (20160422/psparse-542)
[    9.968051] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff8d48b68ac370), AE_AML_OPERAND_VALUE (20160422/psparse-542)
[   10.042155] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[   10.848521] Adding 1998844k swap on /dev/sda5.  Priority:-1 extents:1 across:1998844k FS
[   14.342455] audit: type=1400 audit(1485219999.551:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=798 comm="apparmor_parser"
[   14.342460] audit: type=1400 audit(1485219999.551:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=798 comm="apparmor_parser"
[   14.342462] audit: type=1400 audit(1485219999.551:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=798 comm="apparmor_parser"
[   14.342465] audit: type=1400 audit(1485219999.551:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=798 comm="apparmor_parser"
[   14.343232] audit: type=1400 audit(1485219999.555:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=797 comm="apparmor_parser"
[   14.343237] audit: type=1400 audit(1485219999.555:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=797 comm="apparmor_parser"
[   14.350667] audit: type=1400 audit(1485219999.559:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=801 comm="apparmor_parser"
[   14.351738] audit: type=1400 audit(1485219999.563:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=803 comm="apparmor_parser"
[   14.351743] audit: type=1400 audit(1485219999.563:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=803 comm="apparmor_parser"
[   14.352308] audit: type=1400 audit(1485219999.563:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="udm-extractor" pid=805 comm="apparmor_parser"
[   15.548833] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.548834] Bluetooth: BNEP filters: protocol multicast
[   15.548836] Bluetooth: BNEP socket layer initialized
[   17.738259] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   17.740482] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[   17.740662] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[   17.806768] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[   17.806948] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[   17.822677] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   17.833800] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   18.023215] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   18.357974] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   19.362996] audit_printk_skb: 258 callbacks suppressed
[   19.362999] audit: type=1400 audit(1485220004.575:98): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=1349 comm="apparmor_parser"
[   19.363014] audit: type=1400 audit(1485220004.575:99): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=1349 comm="apparmor_parser"
[   19.383034] audit: type=1400 audit(1485220004.595:100): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=1349 comm="apparmor_parser"
[   19.383051] audit: type=1400 audit(1485220004.595:101): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1349 comm="apparmor_parser"
[   19.402987] audit: type=1400 audit(1485220004.615:102): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1349 comm="apparmor_parser"
[   19.403072] audit: type=1400 audit(1485220004.615:103): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="udm-extractor" pid=1360 comm="apparmor_parser"
[   19.403355] audit: type=1400 audit(1485220004.615:104): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1362 comm="apparmor_parser"
[   19.403908] audit: type=1400 audit(1485220004.615:105): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1364 comm="apparmor_parser"
[   19.403925] audit: type=1400 audit(1485220004.615:106): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1364 comm="apparmor_parser"
[   19.426963] audit: type=1400 audit(1485220004.639:107): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1364 comm="apparmor_parser"
[   21.509347] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   21.509406] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[  252.657802] uvcvideo: Non-zero status (-71) in video completion handler.
[  252.657857] uvcvideo: Non-zero status (-71) in video completion handler.
[  252.657931] uvcvideo: Non-zero status (-71) in video completion handler.
[  252.658016] uvcvideo: Non-zero status (-71) in video completion handler.
[  252.658097] uvcvideo: Non-zero status (-71) in video completion handler.
[  252.662977] usb 1-1.3: USB disconnect, device number 4
[  268.463203] usb 1-1.3: new high-speed USB device number 8 using xhci_hcd
[  268.588277] usb 1-1.3: New USB device found, idVendor=1656, idProduct=0007
[  268.588281] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  268.588284] usb 1-1.3: Product: Q-SYS TSC-7t
[  268.588287] usb 1-1.3: Manufacturer: QSC, LLC
[  268.588289] usb 1-1.3: SerialNumber: TSC7-P1EP1E-L2L2-VB-ea6427eff4
[  268.611501] uvcvideo: Found UVC 1.10 device Q-SYS TSC-7t (1656:0007)
[  268.631205] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[  277.301708] ------------[ cut here ]------------
[  277.301720] WARNING: CPU: 1 PID: 1940 at /build/linux-RZGRu0/linux-4.8.0/fs/sysfs/group.c:237 sysfs_remove_group+0x8b/0x90
[  277.301723] sysfs group ffffffffb7ad04a0 not found for kobject 'media0'
[  277.301724] Modules linked in: cmac bnep binfmt_misc nls_iso8859_1 hp_wmi sparse_keymap uvcvideo(OE) videobuf2_vmalloc(OE) videobuf2_memops(OE) videobuf2_v4l2(OE) videobuf2_core(OE) videodev(OE) intel_rapl x86_pkg_temp_thermal coretemp kvm snd_usb_audio irqbypass media(OE) snd_usbmidi_lib crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel arc4 aes_x86_64 lrw glue_helper iwlmvm snd_hda_codec_hdmi mac80211 snd_hda_codec_realtek snd_hda_codec_generic ablk_helper cryptd snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi btusb snd_seq_midi_event snd_rawmidi snd_seq btrtl snd_seq_device btbcm btintel intel_cstate iwlwifi intel_rapl_perf snd_timer snd bluetooth cfg80211 serio_raw soundcore mei_me mei tpm_infineon shpchp acpi_pad mac_hid parport_pc ppdev lp parport ip_tables
[  277.301800]  x_tables autofs4 i915 i2c_algo_bit e1000e drm_kms_helper psmouse syscopyarea ptp sysfillrect pps_core sysimgblt fb_sys_fops ahci drm libahci wmi video fjes
[  277.301824] CPU: 1 PID: 1940 Comm: gst-launch-1.0 Tainted: G           OE   4.8.0-34-generic #36-Ubuntu
[  277.301826] Hardware name: HP HP ProDesk 600 G2 DM/8169, BIOS N22 Ver. 02.11 04/08/2016
[  277.301830]  0000000000000286 00000000de26f4d5 ffff8d48b3367bb8 ffffffffb7030a22
[  277.301836]  ffff8d48b3367c08 0000000000000000 ffff8d48b3367bf8 ffffffffb6c8319b
[  277.301842]  000000edb3367bf8 0000000000000000 ffffffffb7ad04a0 ffff8d48b11cd020
[  277.301847] Call Trace:
[  277.301854]  [<ffffffffb7030a22>] dump_stack+0x63/0x81
[  277.301860]  [<ffffffffb6c8319b>] __warn+0xcb/0xf0
[  277.301866]  [<ffffffffb6c8321f>] warn_slowpath_fmt+0x5f/0x80
[  277.301870]  [<ffffffffb6eb8398>] ? kernfs_find_and_get_ns+0x48/0x60
[  277.301875]  [<ffffffffb6ebc04b>] sysfs_remove_group+0x8b/0x90
[  277.301880]  [<ffffffffb71a7c17>] dpm_sysfs_remove+0x57/0x60
[  277.301886]  [<ffffffffb719a2f8>] device_del+0x58/0x260
[  277.301896]  [<ffffffffc0900c1f>] media_devnode_unregister+0x3f/0x60 [media]
[  277.301902]  [<ffffffffc0900231>] media_device_unregister+0x141/0x180 [media]
[  277.301909]  [<ffffffffc095823f>] uvc_delete+0x6f/0x160 [uvcvideo]
[  277.301914]  [<ffffffffc0958403>] uvc_release+0x23/0x30 [uvcvideo]
[  277.301926]  [<ffffffffc0a3b946>] v4l2_device_release+0xe6/0x120 [videodev]
[  277.301932]  [<ffffffffb7199ae2>] device_release+0x32/0x90
[  277.301936]  [<ffffffffb703315a>] kobject_release+0x6a/0x170
[  277.301940]  [<ffffffffb7033017>] kobject_put+0x27/0x50
[  277.301945]  [<ffffffffb7199de7>] put_device+0x17/0x20
[  277.301955]  [<ffffffffc0a3a490>] v4l2_release+0x50/0x80 [videodev]
[  277.301959]  [<ffffffffb6e35d57>] __fput+0xe7/0x230
[  277.301963]  [<ffffffffb6e35f0e>] ____fput+0xe/0x10
[  277.301967]  [<ffffffffb6ca2430>] task_work_run+0x80/0xa0
[  277.301971]  [<ffffffffb6c032d2>] exit_to_usermode_loop+0xc2/0xd0
[  277.301976]  [<ffffffffb6c03b2e>] syscall_return_slowpath+0x4e/0x60
[  277.301982]  [<ffffffffb749c33e>] entry_SYSCALL_64_fastpath+0xa6/0xa8
[  277.301985] ---[ end trace 23baeda23ac133c0 ]---
