#! /bin/sh

# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
  --with-libiconv-prefix[=DIR]  search for libiconv in DIR/include and DIR/lib
  --without-libiconv-prefix     don't search for libiconv in includedir and libdir"
ac_help="$ac_help
  --disable-nls           do not use Native Language Support"
ac_help="$ac_help
  --with-included-gettext use the GNU gettext library included here"
ac_help="$ac_help
  --with-libintl-prefix[=DIR]  search for libintl in DIR/include and DIR/lib
  --without-libintl-prefix     don't search for libintl in includedir and libdir"
ac_help="$ac_help
  --enable-maintainer-mode enable make rules and dependencies not useful
                          (and sometimes confusing) to the casual installer"
ac_help="$ac_help
  --enable-static[=PKGS]  build static libraries [default=no]"
ac_help="$ac_help
  --enable-shared[=PKGS]  build shared libraries [default=yes]"
ac_help="$ac_help
  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
ac_help="$ac_help
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"

# Find the correct PATH separator.  Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
  UNAME=${UNAME-`uname 2>/dev/null`}
  case X$UNAME in
    *-DOS) lt_cv_sys_path_separator=';' ;;
    *)     lt_cv_sys_path_separator=':' ;;
  esac
  PATH_SEPARATOR=$lt_cv_sys_path_separator
fi


# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}

case X$ECHO in
X*--fallback-echo)
  # Remove one level of quotation (which was required for Make).
  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
  ;;
esac

echo=${ECHO-echo}
if test "X$1" = X--no-reexec; then
  # Discard the --no-reexec flag, and continue.
  shift
elif test "X$1" = X--fallback-echo; then
  # Avoid inline document here, it may be left over
  :
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
  # Yippee, $echo works!
  :
else
  # Restart under the correct shell.
  exec $SHELL "$0" --no-reexec ${1+"$@"}
fi

if test "X$1" = X--fallback-echo; then
  # used as fallback echo
  shift
  cat <<EOF

EOF
  exit 0
fi

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

if test -z "$ECHO"; then
if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
       echo_test_string="`eval $cmd`" &&
       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
    then
      break
    fi
  done
fi

if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
   test "X$echo_testing_string" = "X$echo_test_string"; then
  :
else
  # The Solaris, AIX, and Digital Unix default echo programs unquote
  # backslashes.  This makes it impossible to quote backslashes using
  #   echo "$something" | sed 's/\\/\\\\/g'
  #
  # So, first we look for a working echo in the user's PATH.

  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for dir in $PATH /usr/ucb; do
    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      echo="$dir/echo"
      break
    fi
  done
  IFS="$save_ifs"

  if test "X$echo" = Xecho; then
    # We didn't find a better echo, so look for alternatives.
    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      # This shell has a builtin print -r that does the trick.
      echo='print -r'
    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
	 test "X$CONFIG_SHELL" != X/bin/ksh; then
      # If we have ksh, try running configure again with it.
      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
      export ORIGINAL_CONFIG_SHELL
      CONFIG_SHELL=/bin/ksh
      export CONFIG_SHELL
      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
    else
      # Try using printf.
      echo='printf %s\n'
      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
	 test "X$echo_testing_string" = "X$echo_test_string"; then
	# Cool, printf works
	:
      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
	   test "X$echo_testing_string" = 'X\t' &&
	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
	   test "X$echo_testing_string" = "X$echo_test_string"; then
	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
	export CONFIG_SHELL
	SHELL="$CONFIG_SHELL"
	export SHELL
	echo="$CONFIG_SHELL $0 --fallback-echo"
      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
	   test "X$echo_testing_string" = 'X\t' &&
	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
	   test "X$echo_testing_string" = "X$echo_test_string"; then
	echo="$CONFIG_SHELL $0 --fallback-echo"
      else
	# maybe with a smaller string...
	prev=:

	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
	  then
	    break
	  fi
	  prev="$cmd"
	done

	if test "$prev" != 'sed 50q "$0"'; then
	  echo_test_string=`eval $prev`
	  export echo_test_string
	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
	else
	  # Oops.  We lost completely, so just stick with echo.
	  echo=echo
	fi
      fi
    fi
  fi
fi
fi

# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
ECHO=$echo
if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
fi


ac_help="$ac_help
  --disable-libtool-lock  avoid locking (might break parallel builds)"
ac_help="$ac_help
  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
ac_help="$ac_help
  --with-glib-prefix=PFX   Prefix where GLIB is installed (optional)"
ac_help="$ac_help
  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)"
ac_help="$ac_help
  --disable-glibtest       Do not try to compile and run a test GLIB program"
ac_help="$ac_help
 --with-g-wrap-prefix=PFX  Prefix where g-wrap is installed (optional)"
ac_help="$ac_help
  --enable-opt-style-install   install everything in subdirs of --prefix"
ac_help="$ac_help
  --enable-debug               compile with debugging flags set"
ac_help="$ac_help
  --enable-profile             compile with profiling set"
ac_help="$ac_help
  --enable-sql                 compile with sql support"
ac_help="$ac_help
  --enable-rpc                 compile with rpc support"
ac_help="$ac_help
  --enable-ofx                 compile with ofx support (needs LibOFX)"
ac_help="$ac_help
  --with-ofx-prefix=DIR     specify where to look for libOFX"
ac_help="$ac_help
  --enable-hbci                compile with HBCI support (needs OpenHBCI)"
ac_help="$ac_help
  --disable-openhbcitest      do not try to compile and run a test OpenHBCI program"
ac_help="$ac_help
  --with-openhbci-prefix=PFX   Prefix where OpenHBCI is installed"
ac_help="$ac_help
  --with-locale-dir=PATH       specify where to look for locale-specific information"
ac_help="$ac_help
  --with-help-prefix=PATH      specify where to store the help files"
ac_help="$ac_help
  --enable-etags               enable automatic create of TAGS file"
ac_help="$ac_help
  --enable-ctags               enable automatic create of tags file"
ac_help="$ac_help
  --with-perl=FILE             which perl executable to use "
ac_help="$ac_help
  --with-perl-includes=DIR     specify where to look for perl includes"
ac_help="$ac_help
  --enable-doxygen        enable documentation generation with doxygen (auto)"
ac_help="$ac_help
  --enable-dot            use 'dot' to generate graphs in doxygen (auto)"
ac_help="$ac_help
  --enable-html-docs      enable HTML generation with doxygen (yes)"
ac_help="$ac_help
  --enable-latex-docs     enable LaTeX documentation generation with doxygen (no)"
ac_help="$ac_help
  --enable-prefer-db1          Prefer Berkeley DB 1.x"
ac_help="$ac_help
  --diable-gui                  build without the GNOME GUI components of Gnucash"
ac_help="$ac_help
  --with-gnome-includes   Specify location of GNOME headers"
ac_help="$ac_help
  --with-gnome-libs       Specify location of GNOME libs"
ac_help="$ac_help
  --with-gnome            Specify prefix for GNOME files"
ac_help="$ac_help
  --enable-compile-warnings=[no/minimum/yes]	Turn on compiler warnings."
ac_help="$ac_help
  --enable-iso-c          Try to warn if code is not ISO C "
ac_help="$ac_help
  --with-gdk-pixbuf-prefix=PFX   Prefix where GDK_PIXBUF is installed (optional)"
ac_help="$ac_help
  --with-gdk-pixbuf-exec-prefix=PFX Exec prefix where GDK_PIXBUF is installed (optional)"
ac_help="$ac_help
  --disable-gdk_pixbuftest       Do not try to compile and run a test GDK_PIXBUF program"
ac_help="$ac_help
  --with-libglade-config=LIBGLADE_CONFIG  Location of libglade-config"
ac_help="$ac_help
  --disable-guppi               compile without guppi support"
ac_help="$ac_help
  --enable-efence               link using efence"
ac_help="$ac_help
  --with-libguppi-prefix=PFX   Prefix where libguppi is installed (optional)"
ac_help="$ac_help
  --with-libguppi-exec-prefix=PFX Exec prefix where libguppi is installed (optional)"
ac_help="$ac_help
  --disable-libguppitest       Do not try to compile and run a test libguppi program"
ac_help="$ac_help
  --enable-xim                 support XIM [default=yes]"
ac_help="$ac_help
  --disable-error-on-warning    disable treating compile warnings as errors"

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir="$ac_optarg" ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [same as prefix]
  --bindir=DIR            user executables in DIR [EPREFIX/bin]
  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
  --datadir=DIR           read-only architecture-independent data in DIR
                          [PREFIX/share]
  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
                          [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
  --includedir=DIR        C header files in DIR [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
  --infodir=DIR           info documentation in DIR [PREFIX/info]
  --mandir=DIR            man documentation in DIR [PREFIX/man]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM
                          run sed PROGRAM on installed program names
EOF
    cat << EOF
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
EOF
    if test -n "$ac_help"; then
      echo "--enable and --with options recognized:$ac_help"
    fi
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir="$ac_optarg" ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir="$ac_optarg" ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir="$ac_optarg" ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir="$ac_optarg" ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir="$ac_optarg" ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir="$ac_optarg" ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir="$ac_optarg" ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir="$ac_optarg" ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.13"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *)
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=src/engine/Transaction.h

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi

# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
  withval="$with_gnu_ld"
  test "$withval" = no || with_gnu_ld=yes
else
  with_gnu_ld=no
fi

ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:806: checking for ld used by GCC" >&5
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:836: checking for GNU ld" >&5
else
  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:839: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'acl_cv_path_LD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      acl_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  acl_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi

LD="$acl_cv_path_LD"
if test -n "$LD"; then
  echo "$ac_t""$LD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:874: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'acl_cv_prog_gnu_ld'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  acl_cv_prog_gnu_ld=yes
else
  acl_cv_prog_gnu_ld=no
fi
fi

echo "$ac_t""$acl_cv_prog_gnu_ld" 1>&6
with_gnu_ld=$acl_cv_prog_gnu_ld




# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:895: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:925: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      ac_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:976: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1008: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 1019 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:1024: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1050: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1055: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1064: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1083: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi


GNUCASH_MAJOR_VERSION=1
GNUCASH_MINOR_VERSION=8
GNUCASH_MICRO_VERSION=4
GNUCASH_VERSION=$GNUCASH_MAJOR_VERSION.$GNUCASH_MINOR_VERSION.$GNUCASH_MICRO_VERSION





ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:1155: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test -f $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:1208: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
   if test "$*" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftestfile`
   fi
   if test "$*" != "X $srcdir/configure conftestfile" \
      && test "$*" != "X conftestfile $srcdir/configure"; then

      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
alias in your environment" 1>&2; exit 1; }
   fi

   test "$2" = conftestfile
   )
then
   # Ok.
   :
else
   { echo "configure: error: newly created file is older than distributed files!
Check your system clock" 1>&2; exit 1; }
fi
rm -f conftest*
echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
  program_transform_name=
else
  # Double any \ or $.  echo might interpret backslashes.
  cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
  rm -f conftestsed
fi
test "$program_prefix" != NONE &&
  program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"

# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"

echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:1265: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi


PACKAGE=gnucash

VERSION=$GNUCASH_VERSION

if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
fi
cat >> confdefs.h <<EOF
#define PACKAGE "$PACKAGE"
EOF

cat >> confdefs.h <<EOF
#define VERSION "$VERSION"
EOF



missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
echo "configure:1311: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
   ACLOCAL=aclocal
   echo "$ac_t""found" 1>&6
else
   ACLOCAL="$missing_dir/missing aclocal"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:1324: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
   AUTOCONF=autoconf
   echo "$ac_t""found" 1>&6
else
   AUTOCONF="$missing_dir/missing autoconf"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:1337: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
   AUTOMAKE=automake
   echo "$ac_t""found" 1>&6
else
   AUTOMAKE="$missing_dir/missing automake"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:1350: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
   AUTOHEADER=autoheader
   echo "$ac_t""found" 1>&6
else
   AUTOHEADER="$missing_dir/missing autoheader"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:1363: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
   MAKEINFO=makeinfo
   echo "$ac_t""found" 1>&6
else
   MAKEINFO="$missing_dir/missing makeinfo"
   echo "$ac_t""missing" 1>&6
fi





if test -n ""; then
    echo $ac_n "checking for intltool >= ""... $ac_c" 1>&6
echo "configure:1381: checking for intltool >= " >&5

    INTLTOOL_REQUIRED_VERSION_AS_INT=$(echo  | awk -F. '{ printf "%d", $1 * 100 + $2; }')
    INTLTOOL_APPLIED_VERSION=$(awk -F\" '/\$VERSION / { printf $2; }'  < intltool-update.in)
    
    INTLTOOL_APPLIED_VERSION_AS_INT=$(awk -F\" '/\$VERSION / { split($2, VERSION, "."); printf "%d\n", VERSION[1] * 100 + VERSION[2];}' < intltool-update.in)
    

    if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT"; then
	echo "$ac_t""$INTLTOOL_APPLIED_VERSION found" 1>&6
    else
	echo "$ac_t""$INTLTOOL_APPLIED_VERSION found. Your intltool is too old.  You need intltool  or later." 1>&6
	exit 1
    fi
fi

  INTLTOOL_DESKTOP_RULE='%.desktop:   %.desktop.in   $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
     INTLTOOL_KEYS_RULE='%.keys:      %.keys.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -k -u -c $(top_builddir)/po/.intltool-merge-cache'
      INTLTOOL_OAF_RULE='%.oaf:       %.oaf.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -o -p'
     INTLTOOL_PONG_RULE='%.pong:      %.pong.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
   INTLTOOL_SERVER_RULE='%.server:    %.server.in    $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -o -u -c $(top_builddir)/po/.intltool-merge-cache'
    INTLTOOL_SHEET_RULE='%.sheet:     %.sheet.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
       INTLTOOL_UI_RULE='%.ui:        %.ui.in        $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
      INTLTOOL_XML_RULE='%.xml:       %.xml.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
    INTLTOOL_CAVES_RULE='%.caves:     %.caves.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'













# Use the tools built into the package, not the ones that are installed.

INTLTOOL_EXTRACT='$(top_builddir)/intltool-extract'
INTLTOOL_MERGE='$(top_builddir)/intltool-merge'
INTLTOOL_UPDATE='$(top_builddir)/intltool-update'





# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1434: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_INTLTOOL_PERL'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$INTLTOOL_PERL" in
  /*)
  ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_INTLTOOL_PERL="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
INTLTOOL_PERL="$ac_cv_path_INTLTOOL_PERL"
if test -n "$INTLTOOL_PERL"; then
  echo "$ac_t""$INTLTOOL_PERL" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$INTLTOOL_PERL"; then
   { echo "configure: error: perl not found; required for intltool" 1>&2; exit 1; }
fi
if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then
   { echo "configure: error: perl 5.x required for intltool" 1>&2; exit 1; }
fi

# Remove file type tags (using []) from po/POTFILES.


  


# Manually sed perl in so people don't have to put the intltool scripts in AC_OUTPUT.









cat >> confdefs.h <<EOF
#define GNUCASH_MAJOR_VERSION $GNUCASH_MAJOR_VERSION
EOF

cat >> confdefs.h <<EOF
#define GNUCASH_MINOR_VERSION $GNUCASH_MINOR_VERSION
EOF

cat >> confdefs.h <<EOF
#define GNUCASH_MICRO_VERSION $GNUCASH_MICRO_VERSION
EOF


ALL_LINGUAS="cs da de el en_GB es es_NI fr hu it ja nb nl pl pt pt_BR ru sk sv ta uk zh_CN zh_TW"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1504: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 1519 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1525: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 1536 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1542: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 1553 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1559: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6


      if test "X$prefix" = "XNONE"; then
    acl_final_prefix="$ac_default_prefix"
  else
    acl_final_prefix="$prefix"
  fi
  if test "X$exec_prefix" = "XNONE"; then
    acl_final_exec_prefix='${prefix}'
  else
    acl_final_exec_prefix="$exec_prefix"
  fi
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
  prefix="$acl_save_prefix"


                                                echo $ac_n "checking for shared library run path origin""... $ac_c" 1>&6
echo "configure:1601: checking for shared library run path origin" >&5
if eval "test \"`echo '$''{'acl_cv_rpath'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
    . ./conftest.sh
    rm -f ./conftest.sh
    acl_cv_rpath=done
  
fi

echo "$ac_t""$acl_cv_rpath" 1>&6
  wl="$acl_cv_wl"
  libext="$acl_cv_libext"
  shlibext="$acl_cv_shlibext"
  hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
  hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
  hardcode_direct="$acl_cv_hardcode_direct"
  hardcode_minus_L="$acl_cv_hardcode_minus_L"
  sys_lib_search_path_spec="$acl_cv_sys_lib_search_path_spec"
  sys_lib_dlsearch_path_spec="$acl_cv_sys_lib_dlsearch_path_spec"


        MKINSTALLDIRS=
  if test -n "$ac_aux_dir"; then
    MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
  fi
  if test -z "$MKINSTALLDIRS"; then
    MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
  fi
  


# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:1642: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


        echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
echo "configure:1694: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcposix  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1702 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char strerror();

int main() {
strerror()
; return 0; }
EOF
if { (eval echo configure:1713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBS="$LIBS -lcposix"
else
  echo "$ac_t""no" 1>&6
fi

  

echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:1736: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1741 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1749: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  ac_cv_header_stdc=yes
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

if test $ac_cv_header_stdc = yes; then
  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1766 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "memchr" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1784 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "free" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
  :
else
  cat > conftest.$ac_ext <<EOF
#line 1805 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }

EOF
if { (eval echo configure:1816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_header_stdc=no
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
  cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF

fi

echo $ac_n "checking for working const""... $ac_c" 1>&6
echo "configure:1840: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1845 "configure"
#include "confdefs.h"

int main() {

/* Ultrix mips cc rejects this.  */
typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this.  */
char const *const *ccp;
char **p;
/* NEC SVR4.0.2 mips cc rejects this.  */
struct point {int x, y;};
static struct point const zero = {0,0};
/* AIX XL C 1.02.0.0 rejects this.
   It does not let you subtract one const X* pointer from another in an arm
   of an if-expression whose if-part is not a constant expression */
const char *g = "string";
ccp = &g + (g ? g-g : 0);
/* HPUX 7.0 cc rejects these. */
++ccp;
p = (char**) ccp;
ccp = (char const *const *) p;
{ /* SCO 3.2v4 cc rejects this.  */
  char *t;
  char const *s = 0 ? (char *) 0 : (char const *) 0;

  *t++ = 0;
}
{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
  int x[] = {25, 17};
  const int *foo = &x[0];
  ++foo;
}
{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
  typedef const int *iptr;
  iptr p = 0;
  ++p;
}
{ /* AIX XL C 1.02.0.0 rejects this saying
     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
  struct s { int j; const int *ap[3]; };
  struct s *b; b->j = 5;
}
{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
  const int foo = 10;
}

; return 0; }
EOF
if { (eval echo configure:1894: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_c_const=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_c_const=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_c_const" 1>&6
if test $ac_cv_c_const = no; then
  cat >> confdefs.h <<\EOF
#define const 
EOF

fi

echo $ac_n "checking for inline""... $ac_c" 1>&6
echo "configure:1915: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
  cat > conftest.$ac_ext <<EOF
#line 1922 "configure"
#include "confdefs.h"

int main() {
} $ac_kw foo() {
; return 0; }
EOF
if { (eval echo configure:1929: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_c_inline=$ac_kw; break
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
done

fi

echo "$ac_t""$ac_cv_c_inline" 1>&6
case "$ac_cv_c_inline" in
  inline | yes) ;;
  no) cat >> confdefs.h <<\EOF
#define inline 
EOF
 ;;
  *)  cat >> confdefs.h <<EOF
#define inline $ac_cv_c_inline
EOF
 ;;
esac

echo $ac_n "checking for off_t""... $ac_c" 1>&6
echo "configure:1955: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1960 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#include <stddef.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_type_off_t=yes
else
  rm -rf conftest*
  ac_cv_type_off_t=no
fi
rm -f conftest*

fi
echo "$ac_t""$ac_cv_type_off_t" 1>&6
if test $ac_cv_type_off_t = no; then
  cat >> confdefs.h <<\EOF
#define off_t long
EOF

fi

echo $ac_n "checking for size_t""... $ac_c" 1>&6
echo "configure:1988: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1993 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#include <stddef.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_type_size_t=yes
else
  rm -rf conftest*
  ac_cv_type_size_t=no
fi
rm -f conftest*

fi
echo "$ac_t""$ac_cv_type_size_t" 1>&6
if test $ac_cv_type_size_t = no; then
  cat >> confdefs.h <<\EOF
#define size_t unsigned
EOF

fi

# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments.  Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
echo "configure:2023: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2028 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
if { (eval echo configure:2035: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_header_alloca_h=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_alloca_h=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
if test $ac_cv_header_alloca_h = yes; then
  cat >> confdefs.h <<\EOF
#define HAVE_ALLOCA_H 1
EOF

fi

echo $ac_n "checking for alloca""... $ac_c" 1>&6
echo "configure:2056: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2061 "configure"
#include "confdefs.h"

#ifdef __GNUC__
# define alloca __builtin_alloca
#else
# ifdef _MSC_VER
#  include <malloc.h>
#  define alloca _alloca
# else
#  if HAVE_ALLOCA_H
#   include <alloca.h>
#  else
#   ifdef _AIX
 #pragma alloca
#   else
#    ifndef alloca /* predefined by HP cc +Olibcalls */
char *alloca ();
#    endif
#   endif
#  endif
# endif
#endif

int main() {
char *p = (char *) alloca(1);
; return 0; }
EOF
if { (eval echo configure:2089: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_func_alloca_works=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_func_alloca_works=no
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
if test $ac_cv_func_alloca_works = yes; then
  cat >> confdefs.h <<\EOF
#define HAVE_ALLOCA 1
EOF

fi

if test $ac_cv_func_alloca_works = no; then
  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
  # that cause trouble.  Some versions do not even contain alloca or
  # contain a buggy version.  If you still want to use their alloca,
  # use ar to extract alloca.o from them instead of compiling alloca.c.
  ALLOCA=alloca.${ac_objext}
  cat >> confdefs.h <<\EOF
#define C_ALLOCA 1
EOF


echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
echo "configure:2121: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2126 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
#else
wenotbecray
#endif

EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "webecray" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_os_cray=yes
else
  rm -rf conftest*
  ac_cv_os_cray=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_os_cray" 1>&6
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
  echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2151: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2156 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<EOF
#define CRAY_STACKSEG_END $ac_func
EOF

  break
else
  echo "$ac_t""no" 1>&6
fi

done
fi

echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
echo "configure:2206: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_c_stack_direction=0
else
  cat > conftest.$ac_ext <<EOF
#line 2214 "configure"
#include "confdefs.h"
find_stack_direction ()
{
  static char *addr = 0;
  auto char dummy;
  if (addr == 0)
    {
      addr = &dummy;
      return find_stack_direction ();
    }
  else
    return (&dummy > addr) ? 1 : -1;
}
main ()
{
  exit (find_stack_direction() < 0);
}
EOF
if { (eval echo configure:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_c_stack_direction=1
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_c_stack_direction=-1
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
cat >> confdefs.h <<EOF
#define STACK_DIRECTION $ac_cv_c_stack_direction
EOF

fi

for ac_hdr in stdlib.h unistd.h sys/stat.h sys/types.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:2258: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2263 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2268: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2297: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2302 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

echo $ac_n "checking for working mmap""... $ac_c" 1>&6
echo "configure:2350: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_func_mmap_fixed_mapped=no
else
  cat > conftest.$ac_ext <<EOF
#line 2358 "configure"
#include "confdefs.h"

/* Thanks to Mike Haertel and Jim Avera for this test.
   Here is a matrix of mmap possibilities:
	mmap private not fixed
	mmap private fixed at somewhere currently unmapped
	mmap private fixed at somewhere already mapped
	mmap shared not fixed
	mmap shared fixed at somewhere currently unmapped
	mmap shared fixed at somewhere already mapped
   For private mappings, we should verify that changes cannot be read()
   back from the file, nor mmap's back from the file at a different
   address.  (There have been systems where private was not correctly
   implemented like the infamous i386 svr4.0, and systems where the
   VM page cache was not coherent with the filesystem buffer cache
   like early versions of FreeBSD and possibly contemporary NetBSD.)
   For shared mappings, we should conversely verify that changes get
   propogated back to all the places they're supposed to be.

   Grep wants private fixed already mapped.
   The main things grep needs to know about mmap are:
   * does it exist and is it safe to write into the mmap'd area
   * how to use it (BSD variants)  */
#include <sys/types.h>
#include <fcntl.h>
#include <sys/mman.h>

#if HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif

#if HAVE_STDLIB_H
# include <stdlib.h>
#endif

#if HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif

#if HAVE_UNISTD_H
# include <unistd.h>
#endif

/* This mess was copied from the GNU getpagesize.h.  */
#ifndef HAVE_GETPAGESIZE

/* Assume that all systems that can run configure have sys/param.h.  */
# ifndef HAVE_SYS_PARAM_H
#  define HAVE_SYS_PARAM_H 1
# endif

# ifdef _SC_PAGESIZE
#  define getpagesize() sysconf(_SC_PAGESIZE)
# else /* no _SC_PAGESIZE */
#  ifdef HAVE_SYS_PARAM_H
#   include <sys/param.h>
#   ifdef EXEC_PAGESIZE
#    define getpagesize() EXEC_PAGESIZE
#   else /* no EXEC_PAGESIZE */
#    ifdef NBPG
#     define getpagesize() NBPG * CLSIZE
#     ifndef CLSIZE
#      define CLSIZE 1
#     endif /* no CLSIZE */
#    else /* no NBPG */
#     ifdef NBPC
#      define getpagesize() NBPC
#     else /* no NBPC */
#      ifdef PAGESIZE
#       define getpagesize() PAGESIZE
#      endif /* PAGESIZE */
#     endif /* no NBPC */
#    endif /* no NBPG */
#   endif /* no EXEC_PAGESIZE */
#  else /* no HAVE_SYS_PARAM_H */
#   define getpagesize() 8192	/* punt totally */
#  endif /* no HAVE_SYS_PARAM_H */
# endif /* no _SC_PAGESIZE */

#endif /* no HAVE_GETPAGESIZE */

#ifdef __cplusplus
extern "C" { void *malloc(unsigned); }
#else
char *malloc();
#endif

int
main()
{
	char *data, *data2, *data3;
	int i, pagesize;
	int fd;

	pagesize = getpagesize();

	/*
	 * First, make a file with some known garbage in it.
	 */
	data = malloc(pagesize);
	if (!data)
		exit(1);
	for (i = 0; i < pagesize; ++i)
		*(data + i) = rand();
	umask(0);
	fd = creat("conftestmmap", 0600);
	if (fd < 0)
		exit(1);
	if (write(fd, data, pagesize) != pagesize)
		exit(1);
	close(fd);

	/*
	 * Next, try to mmap the file at a fixed address which
	 * already has something else allocated at it.  If we can,
	 * also make sure that we see the same garbage.
	 */
	fd = open("conftestmmap", O_RDWR);
	if (fd < 0)
		exit(1);
	data2 = malloc(2 * pagesize);
	if (!data2)
		exit(1);
	data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
	if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
	    MAP_PRIVATE | MAP_FIXED, fd, 0L))
		exit(1);
	for (i = 0; i < pagesize; ++i)
		if (*(data + i) != *(data2 + i))
			exit(1);

	/*
	 * Finally, make sure that changes to the mapped area
	 * do not percolate back to the file as seen by read().
	 * (This is a bug on some variants of i386 svr4.0.)
	 */
	for (i = 0; i < pagesize; ++i)
		*(data2 + i) = *(data2 + i) + 1;
	data3 = malloc(pagesize);
	if (!data3)
		exit(1);
	if (read(fd, data3, pagesize) != pagesize)
		exit(1);
	for (i = 0; i < pagesize; ++i)
		if (*(data + i) != *(data3 + i))
			exit(1);
	close(fd);
	unlink("conftestmmap");
	exit(0);
}

EOF
if { (eval echo configure:2511: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_func_mmap_fixed_mapped=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_func_mmap_fixed_mapped=no
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
if test $ac_cv_func_mmap_fixed_mapped = yes; then
  cat >> confdefs.h <<\EOF
#define HAVE_MMAP 1
EOF

fi


    echo $ac_n "checking whether we are using the GNU C Library 2.1 or newer""... $ac_c" 1>&6
echo "configure:2535: checking whether we are using the GNU C Library 2.1 or newer" >&5
if eval "test \"`echo '$''{'ac_cv_gnu_library_2_1'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2540 "configure"
#include "confdefs.h"

#include <features.h>
#ifdef __GNU_LIBRARY__
 #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
  Lucky GNU user
 #endif
#endif
	
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "Lucky GNU user" >/dev/null 2>&1; then
  rm -rf conftest*
  ac_cv_gnu_library_2_1=yes
else
  rm -rf conftest*
  ac_cv_gnu_library_2_1=no
fi
rm -f conftest*

      
    
fi

echo "$ac_t""$ac_cv_gnu_library_2_1" 1>&6
    
    GLIBC21="$ac_cv_gnu_library_2_1"
  


    
    
  

      
  
    use_additional=yes
  
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  
    eval additional_includedir=\"$includedir\"
    eval additional_libdir=\"$libdir\"
  
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

  # Check whether --with-libiconv-prefix or --without-libiconv-prefix was given.
if test "${with_libiconv_prefix+set}" = set; then
  withval="$with_libiconv_prefix"
  
    if test "X$withval" = "Xno"; then
      use_additional=no
    else
      if test "X$withval" = "X"; then
        
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  
          eval additional_includedir=\"$includedir\"
          eval additional_libdir=\"$libdir\"
        
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

      else
        additional_includedir="$withval/include"
        additional_libdir="$withval/lib"
      fi
    fi

fi

      LIBICONV=
  LTLIBICONV=
  INCICONV=
  rpathdirs=
  ltrpathdirs=
  names_already_handled=
  names_next_round='iconv '
  while test -n "$names_next_round"; do
    names_this_round="$names_next_round"
    names_next_round=
    for name in $names_this_round; do
      already_handled=
      for n in $names_already_handled; do
        if test "$n" = "$name"; then
          already_handled=yes
          break
        fi
      done
      if test -z "$already_handled"; then
        names_already_handled="$names_already_handled $name"
                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
        eval value=\"\$HAVE_LIB$uppername\"
        if test -n "$value"; then
          if test "$value" = yes; then
            eval value=\"\$LIB$uppername\"
            test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
            eval value=\"\$LTLIB$uppername\"
            test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
          else
                                    :
          fi
        else
                              found_dir=
          found_la=
          found_so=
          found_a=
          if test $use_additional = yes; then
            if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
              found_dir="$additional_libdir"
              found_so="$additional_libdir/lib$name.$shlibext"
              if test -f "$additional_libdir/lib$name.la"; then
                found_la="$additional_libdir/lib$name.la"
              fi
            else
              if test -f "$additional_libdir/lib$name.$libext"; then
                found_dir="$additional_libdir"
                found_a="$additional_libdir/lib$name.$libext"
                if test -f "$additional_libdir/lib$name.la"; then
                  found_la="$additional_libdir/lib$name.la"
                fi
              fi
            fi
          fi
          if test "X$found_dir" = "X"; then
            for x in $LDFLAGS $LTLIBICONV; do
              
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

              case "$x" in
                -L*)
                  dir=`echo "X$x" | sed -e 's/^X-L//'`
                  if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
                    found_dir="$dir"
                    found_so="$dir/lib$name.$shlibext"
                    if test -f "$dir/lib$name.la"; then
                      found_la="$dir/lib$name.la"
                    fi
                  else
                    if test -f "$dir/lib$name.$libext"; then
                      found_dir="$dir"
                      found_a="$dir/lib$name.$libext"
                      if test -f "$dir/lib$name.la"; then
                        found_la="$dir/lib$name.la"
                      fi
                    fi
                  fi
                  ;;
              esac
              if test "X$found_dir" != "X"; then
                break
              fi
            done
          fi
          if test "X$found_dir" != "X"; then
                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
            if test "X$found_so" != "X"; then
                                                        if test "X$found_dir" = "X/usr/lib"; then
                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
              else
                                                                                haveit=
                for x in $ltrpathdirs; do
                  if test "X$x" = "X$found_dir"; then
                    haveit=yes
                    break
                  fi
                done
                if test -z "$haveit"; then
                  ltrpathdirs="$ltrpathdirs $found_dir"
                fi
                                if test "$hardcode_direct" = yes; then
                                                      LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
                else
                  if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
                                                            haveit=
                    for x in $rpathdirs; do
                      if test "X$x" = "X$found_dir"; then
                        haveit=yes
                        break
                      fi
                    done
                    if test -z "$haveit"; then
                      rpathdirs="$rpathdirs $found_dir"
                    fi
                  else
                                                                                haveit=
                    for x in $LDFLAGS $LIBICONV; do
                      
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

                      if test "X$x" = "X-L$found_dir"; then
                        haveit=yes
                        break
                      fi
                    done
                    if test -z "$haveit"; then
                      LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
                    fi
                    if test "$hardcode_minus_L" != no; then
                                                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
                    else
                                                                                                                                                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
                    fi
                  fi
                fi
              fi
            else
              if test "X$found_a" != "X"; then
                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
              else
                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
              fi
            fi
                        additional_includedir=
            case "$found_dir" in
              */lib | */lib/)
                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
                additional_includedir="$basedir/include"
                ;;
            esac
            if test "X$additional_includedir" != "X"; then
                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
                haveit=
                if test "X$additional_includedir" = "X/usr/local/include"; then
                  if test -n "$GCC"; then
                    case $host_os in
                      linux*) haveit=yes;;
                    esac
                  fi
                fi
                if test -z "$haveit"; then
                  for x in $CPPFLAGS $INCICONV; do
                    
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

                    if test "X$x" = "X-I$additional_includedir"; then
                      haveit=yes
                      break
                    fi
                  done
                  if test -z "$haveit"; then
                    if test -d "$additional_includedir"; then
                                            INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
                    fi
                  fi
                fi
              fi
            fi
                        if test -n "$found_la"; then
                                                        save_libdir="$libdir"
              case "$found_la" in
                */* | *\\*) . "$found_la" ;;
                *) . "./$found_la" ;;
              esac
              libdir="$save_libdir"
                            for dep in $dependency_libs; do
                case "$dep" in
                  -L*)
                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
                                                                                                                                                                if test "X$additional_libdir" != "X/usr/lib"; then
                      haveit=
                      if test "X$additional_libdir" = "X/usr/local/lib"; then
                        if test -n "$GCC"; then
                          case $host_os in
                            linux*) haveit=yes;;
                          esac
                        fi
                      fi
                      if test -z "$haveit"; then
                        haveit=
                        for x in $LDFLAGS $LIBICONV; do
                          
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

                          if test "X$x" = "X-L$additional_libdir"; then
                            haveit=yes
                            break
                          fi
                        done
                        if test -z "$haveit"; then
                          if test -d "$additional_libdir"; then
                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
                          fi
                        fi
                        haveit=
                        for x in $LDFLAGS $LTLIBICONV; do
                          
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

                          if test "X$x" = "X-L$additional_libdir"; then
                            haveit=yes
                            break
                          fi
                        done
                        if test -z "$haveit"; then
                          if test -d "$additional_libdir"; then
                                                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
                          fi
                        fi
                      fi
                    fi
                    ;;
                  -l*)
                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
                    ;;
                  *.la)
                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
                    ;;
                  *)
                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
                    LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
                    ;;
                esac
              done
            fi
          else
                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
            LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
          fi
        fi
      fi
    done
  done
  if test "X$rpathdirs" != "X"; then
    if test -n "$hardcode_libdir_separator"; then
                        alldirs=
      for found_dir in $rpathdirs; do
        alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
      done
            acl_save_libdir="$libdir"
      libdir="$alldirs"
      eval flag=\"$hardcode_libdir_flag_spec\"
      libdir="$acl_save_libdir"
      LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
    else
            for found_dir in $rpathdirs; do
        acl_save_libdir="$libdir"
        libdir="$found_dir"
        eval flag=\"$hardcode_libdir_flag_spec\"
        libdir="$acl_save_libdir"
        LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
      done
    fi
  fi
  if test "X$ltrpathdirs" != "X"; then
            for found_dir in $ltrpathdirs; do
      LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
    done
  fi


          am_save_CPPFLAGS="$CPPFLAGS"
  
  for element in $INCICONV; do
    haveit=
    for x in $CPPFLAGS; do
      
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

      if test "X$x" = "X$element"; then
        haveit=yes
        break
      fi
    done
    if test -z "$haveit"; then
      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
    fi
  done


  echo $ac_n "checking for iconv""... $ac_c" 1>&6
echo "configure:2955: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
    am_cv_func_iconv="no, consider installing GNU libiconv"
    am_cv_lib_iconv=no
    cat > conftest.$ac_ext <<EOF
#line 2963 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
int main() {
iconv_t cd = iconv_open("","");
       iconv(cd,NULL,NULL,NULL,NULL);
       iconv_close(cd);
; return 0; }
EOF
if { (eval echo configure:2973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  am_cv_func_iconv=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
    if test "$am_cv_func_iconv" != yes; then
      am_save_LIBS="$LIBS"
      LIBS="$LIBS $LIBICONV"
      cat > conftest.$ac_ext <<EOF
#line 2985 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
int main() {
iconv_t cd = iconv_open("","");
         iconv(cd,NULL,NULL,NULL,NULL);
         iconv_close(cd);
; return 0; }
EOF
if { (eval echo configure:2995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  am_cv_lib_iconv=yes
        am_cv_func_iconv=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
      LIBS="$am_save_LIBS"
    fi
  
fi

echo "$ac_t""$am_cv_func_iconv" 1>&6
  if test "$am_cv_func_iconv" = yes; then
    cat >> confdefs.h <<\EOF
#define HAVE_ICONV 1
EOF

  fi
  if test "$am_cv_lib_iconv" = yes; then
    echo $ac_n "checking how to link with libiconv""... $ac_c" 1>&6
echo "configure:3018: checking how to link with libiconv" >&5
    echo "$ac_t""$LIBICONV" 1>&6
  else
            CPPFLAGS="$am_save_CPPFLAGS"
    LIBICONV=
    LTLIBICONV=
  fi
  
  


      
    
        # Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3034: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$MSGFMT" in
  /*)
  ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if $ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 &&
     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
	ac_cv_path_MSGFMT="$ac_dir/$ac_word"
	break
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
  ;;
esac
fi
MSGFMT="$ac_cv_path_MSGFMT"
if test "$MSGFMT" != ":"; then
  echo "$ac_t""$MSGFMT" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  # Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3069: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GMSGFMT" in
  /*)
  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
  ;;
esac
fi
GMSGFMT="$ac_cv_path_GMSGFMT"
if test -n "$GMSGFMT"; then
  echo "$ac_t""$GMSGFMT" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


        # Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3106: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$XGETTEXT" in
  /*)
  ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if $ac_dir/$ac_word --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 &&
     (if $ac_dir/$ac_word --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
	ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
	break
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
  ;;
esac
fi
XGETTEXT="$ac_cv_path_XGETTEXT"
if test "$XGETTEXT" != ":"; then
  echo "$ac_t""$XGETTEXT" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

    rm -f messages.po

    # Extract the first word of "msgmerge", so it can be a program name with args.
set dummy msgmerge; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3143: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGMERGE'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$MSGMERGE" in
  /*)
  ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if $ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1; then
	ac_cv_path_MSGMERGE="$ac_dir/$ac_word"
	break
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
  ;;
esac
fi
MSGMERGE="$ac_cv_path_MSGMERGE"
if test "$MSGMERGE" != ":"; then
  echo "$ac_t""$MSGMERGE" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


      if test "$GMSGFMT" != ":"; then
            if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 &&
       (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
      : ;
    else
      GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'`
      echo "$ac_t""found $GMSGFMT program is not GNU msgfmt; ignore it" 1>&6
      GMSGFMT=":"
    fi
  fi

      if test "$XGETTEXT" != ":"; then
            if $XGETTEXT --omit-header --copyright-holder= /dev/null >/dev/null 2>&1 &&
       (if $XGETTEXT --omit-header --copyright-holder= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
      : ;
    else
      echo "$ac_t""found xgettext program is not GNU xgettext; ignore it" 1>&6
      XGETTEXT=":"
    fi
        rm -f messages.po
  fi

  


                            
  for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
stdlib.h string.h unistd.h sys/param.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:3206: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3211 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3216: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

  for ac_func in feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \
geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \
strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:3247: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3252 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:3275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


  
  
  if test "$am_cv_func_iconv" = yes; then
    echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
echo "configure:3304: checking for iconv declaration" >&5
    if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
      cat > conftest.$ac_ext <<EOF
#line 3310 "configure"
#include "confdefs.h"

#include <stdlib.h>
#include <iconv.h>
extern
#ifdef __cplusplus
"C"
#endif
#if defined(__STDC__) || defined(__cplusplus)
size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
#else
size_t iconv();
#endif

int main() {

; return 0; }
EOF
if { (eval echo configure:3329: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  am_cv_proto_iconv_arg1=""
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  am_cv_proto_iconv_arg1="const"
fi
rm -f conftest*
      am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"
fi

    am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
    echo "$ac_t""${ac_t:-
         }$am_cv_proto_iconv" 1>&6
    cat >> confdefs.h <<EOF
#define ICONV_CONST $am_cv_proto_iconv_arg1
EOF

  fi

  
  echo $ac_n "checking for nl_langinfo and CODESET""... $ac_c" 1>&6
echo "configure:3353: checking for nl_langinfo and CODESET" >&5
if eval "test \"`echo '$''{'am_cv_langinfo_codeset'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3358 "configure"
#include "confdefs.h"
#include <langinfo.h>
int main() {
char* cs = nl_langinfo(CODESET);
; return 0; }
EOF
if { (eval echo configure:3365: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  am_cv_langinfo_codeset=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  am_cv_langinfo_codeset=no
fi
rm -f conftest*
    
fi

echo "$ac_t""$am_cv_langinfo_codeset" 1>&6
  if test $am_cv_langinfo_codeset = yes; then
    cat >> confdefs.h <<\EOF
#define HAVE_LANGINFO_CODESET 1
EOF

  fi

  if test $ac_cv_header_locale_h = yes; then
    echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
echo "configure:3388: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3393 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
if { (eval echo configure:3400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  am_cv_val_LC_MESSAGES=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  am_cv_val_LC_MESSAGES=no
fi
rm -f conftest*
fi

echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6
    if test $am_cv_val_LC_MESSAGES = yes; then
      cat >> confdefs.h <<\EOF
#define HAVE_LC_MESSAGES 1
EOF

    fi
  fi

                      for ac_prog in bison
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3426: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_INTLBISON'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$INTLBISON"; then
  ac_cv_prog_INTLBISON="$INTLBISON" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_INTLBISON="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
INTLBISON="$ac_cv_prog_INTLBISON"
if test -n "$INTLBISON"; then
  echo "$ac_t""$INTLBISON" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$INTLBISON" && break
done

  if test -z "$INTLBISON"; then
    ac_verc_fail=yes
  else
        echo $ac_n "checking version of bison""... $ac_c" 1>&6
echo "configure:3459: checking version of bison" >&5
    ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
    case $ac_prog_version in
      '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
      1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
         ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
      *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
    esac
    echo "$ac_t""$ac_prog_version" 1>&6
  fi
  if test $ac_verc_fail = yes; then
    INTLBISON=:
  fi


    
  
  
  

    
      

    
  

  echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
echo "configure:3486: checking whether NLS is requested" >&5
    # Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
  enableval="$enable_nls"
  USE_NLS=$enableval
else
  USE_NLS=yes
fi

  echo "$ac_t""$USE_NLS" 1>&6
  

  
    BUILD_INCLUDED_LIBINTL=no
    USE_INCLUDED_LIBINTL=no
  
  LIBINTL=
  LTLIBINTL=
  POSUB=

    if test "$USE_NLS" = "yes"; then
    gt_use_preinstalled_gnugettext=no
    
      echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
echo "configure:3510: checking whether included gettext is requested" >&5
      # Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
  withval="$with_included_gettext"
  nls_cv_force_use_gnu_gettext=$withval
else
  nls_cv_force_use_gnu_gettext=no
fi

      echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6

      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
    
                        
                
        
        

        echo $ac_n "checking for GNU gettext in libc""... $ac_c" 1>&6
echo "configure:3530: checking for GNU gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3535 "configure"
#include "confdefs.h"
#include <libintl.h>
extern int _nl_msg_cat_cntr;
extern int *_nl_domain_bindings;
int main() {
bindtextdomain ("", "");
return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_domain_bindings
; return 0; }
EOF
if { (eval echo configure:3545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  gt_cv_func_gnugettext1_libc=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  gt_cv_func_gnugettext1_libc=no
fi
rm -f conftest*
fi

echo "$ac_t""$gt_cv_func_gnugettext1_libc" 1>&6

        if test "$gt_cv_func_gnugettext1_libc" != "yes"; then
                    
                                                  
  
    use_additional=yes
  
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  
    eval additional_includedir=\"$includedir\"
    eval additional_libdir=\"$libdir\"
  
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

  # Check whether --with-libintl-prefix or --without-libintl-prefix was given.
if test "${with_libintl_prefix+set}" = set; then
  withval="$with_libintl_prefix"
  
    if test "X$withval" = "Xno"; then
      use_additional=no
    else
      if test "X$withval" = "X"; then
        
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  
          eval additional_includedir=\"$includedir\"
          eval additional_libdir=\"$libdir\"
        
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

      else
        additional_includedir="$withval/include"
        additional_libdir="$withval/lib"
      fi
    fi

fi

      LIBINTL=
  LTLIBINTL=
  INCINTL=
  rpathdirs=
  ltrpathdirs=
  names_already_handled=
  names_next_round='intl '
  while test -n "$names_next_round"; do
    names_this_round="$names_next_round"
    names_next_round=
    for name in $names_this_round; do
      already_handled=
      for n in $names_already_handled; do
        if test "$n" = "$name"; then
          already_handled=yes
          break
        fi
      done
      if test -z "$already_handled"; then
        names_already_handled="$names_already_handled $name"
                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
        eval value=\"\$HAVE_LIB$uppername\"
        if test -n "$value"; then
          if test "$value" = yes; then
            eval value=\"\$LIB$uppername\"
            test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
            eval value=\"\$LTLIB$uppername\"
            test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
          else
                                    :
          fi
        else
                              found_dir=
          found_la=
          found_so=
          found_a=
          if test $use_additional = yes; then
            if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
              found_dir="$additional_libdir"
              found_so="$additional_libdir/lib$name.$shlibext"
              if test -f "$additional_libdir/lib$name.la"; then
                found_la="$additional_libdir/lib$name.la"
              fi
            else
              if test -f "$additional_libdir/lib$name.$libext"; then
                found_dir="$additional_libdir"
                found_a="$additional_libdir/lib$name.$libext"
                if test -f "$additional_libdir/lib$name.la"; then
                  found_la="$additional_libdir/lib$name.la"
                fi
              fi
            fi
          fi
          if test "X$found_dir" = "X"; then
            for x in $LDFLAGS $LTLIBINTL; do
              
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

              case "$x" in
                -L*)
                  dir=`echo "X$x" | sed -e 's/^X-L//'`
                  if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
                    found_dir="$dir"
                    found_so="$dir/lib$name.$shlibext"
                    if test -f "$dir/lib$name.la"; then
                      found_la="$dir/lib$name.la"
                    fi
                  else
                    if test -f "$dir/lib$name.$libext"; then
                      found_dir="$dir"
                      found_a="$dir/lib$name.$libext"
                      if test -f "$dir/lib$name.la"; then
                        found_la="$dir/lib$name.la"
                      fi
                    fi
                  fi
                  ;;
              esac
              if test "X$found_dir" != "X"; then
                break
              fi
            done
          fi
          if test "X$found_dir" != "X"; then
                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
            if test "X$found_so" != "X"; then
                                                        if test "X$found_dir" = "X/usr/lib"; then
                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
              else
                                                                                haveit=
                for x in $ltrpathdirs; do
                  if test "X$x" = "X$found_dir"; then
                    haveit=yes
                    break
                  fi
                done
                if test -z "$haveit"; then
                  ltrpathdirs="$ltrpathdirs $found_dir"
                fi
                                if test "$hardcode_direct" = yes; then
                                                      LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
                else
                  if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
                                                            haveit=
                    for x in $rpathdirs; do
                      if test "X$x" = "X$found_dir"; then
                        haveit=yes
                        break
                      fi
                    done
                    if test -z "$haveit"; then
                      rpathdirs="$rpathdirs $found_dir"
                    fi
                  else
                                                                                haveit=
                    for x in $LDFLAGS $LIBINTL; do
                      
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

                      if test "X$x" = "X-L$found_dir"; then
                        haveit=yes
                        break
                      fi
                    done
                    if test -z "$haveit"; then
                      LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
                    fi
                    if test "$hardcode_minus_L" != no; then
                                                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
                    else
                                                                                                                                                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
                    fi
                  fi
                fi
              fi
            else
              if test "X$found_a" != "X"; then
                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
              else
                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
              fi
            fi
                        additional_includedir=
            case "$found_dir" in
              */lib | */lib/)
                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
                additional_includedir="$basedir/include"
                ;;
            esac
            if test "X$additional_includedir" != "X"; then
                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
                haveit=
                if test "X$additional_includedir" = "X/usr/local/include"; then
                  if test -n "$GCC"; then
                    case $host_os in
                      linux*) haveit=yes;;
                    esac
                  fi
                fi
                if test -z "$haveit"; then
                  for x in $CPPFLAGS $INCINTL; do
                    
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

                    if test "X$x" = "X-I$additional_includedir"; then
                      haveit=yes
                      break
                    fi
                  done
                  if test -z "$haveit"; then
                    if test -d "$additional_includedir"; then
                                            INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
                    fi
                  fi
                fi
              fi
            fi
                        if test -n "$found_la"; then
                                                        save_libdir="$libdir"
              case "$found_la" in
                */* | *\\*) . "$found_la" ;;
                *) . "./$found_la" ;;
              esac
              libdir="$save_libdir"
                            for dep in $dependency_libs; do
                case "$dep" in
                  -L*)
                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
                                                                                                                                                                if test "X$additional_libdir" != "X/usr/lib"; then
                      haveit=
                      if test "X$additional_libdir" = "X/usr/local/lib"; then
                        if test -n "$GCC"; then
                          case $host_os in
                            linux*) haveit=yes;;
                          esac
                        fi
                      fi
                      if test -z "$haveit"; then
                        haveit=
                        for x in $LDFLAGS $LIBINTL; do
                          
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

                          if test "X$x" = "X-L$additional_libdir"; then
                            haveit=yes
                            break
                          fi
                        done
                        if test -z "$haveit"; then
                          if test -d "$additional_libdir"; then
                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
                          fi
                        fi
                        haveit=
                        for x in $LDFLAGS $LTLIBINTL; do
                          
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

                          if test "X$x" = "X-L$additional_libdir"; then
                            haveit=yes
                            break
                          fi
                        done
                        if test -z "$haveit"; then
                          if test -d "$additional_libdir"; then
                                                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
                          fi
                        fi
                      fi
                    fi
                    ;;
                  -l*)
                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
                    ;;
                  *.la)
                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
                    ;;
                  *)
                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
                    LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
                    ;;
                esac
              done
            fi
          else
                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
            LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
          fi
        fi
      fi
    done
  done
  if test "X$rpathdirs" != "X"; then
    if test -n "$hardcode_libdir_separator"; then
                        alldirs=
      for found_dir in $rpathdirs; do
        alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
      done
            acl_save_libdir="$libdir"
      libdir="$alldirs"
      eval flag=\"$hardcode_libdir_flag_spec\"
      libdir="$acl_save_libdir"
      LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
    else
            for found_dir in $rpathdirs; do
        acl_save_libdir="$libdir"
        libdir="$found_dir"
        eval flag=\"$hardcode_libdir_flag_spec\"
        libdir="$acl_save_libdir"
        LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
      done
    fi
  fi
  if test "X$ltrpathdirs" != "X"; then
            for found_dir in $ltrpathdirs; do
      LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
    done
  fi

          echo $ac_n "checking for GNU gettext in libintl""... $ac_c" 1>&6
echo "configure:3915: checking for GNU gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libintl'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  gt_save_CPPFLAGS="$CPPFLAGS"
            CPPFLAGS="$CPPFLAGS $INCINTL"
            gt_save_LIBS="$LIBS"
            LIBS="$LIBS $LIBINTL"
                        cat > conftest.$ac_ext <<EOF
#line 3924 "configure"
#include "confdefs.h"
#include <libintl.h>
extern int _nl_msg_cat_cntr;
extern int *_nl_domain_bindings;
extern
#ifdef __cplusplus
"C"
#endif
const char *_nl_expand_alias ();
int main() {
bindtextdomain ("", "");
return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_domain_bindings + *_nl_expand_alias (0)
; return 0; }
EOF
if { (eval echo configure:3939: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  gt_cv_func_gnugettext1_libintl=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  gt_cv_func_gnugettext1_libintl=no
fi
rm -f conftest*
                        if test "$gt_cv_func_gnugettext1_libintl" != yes && test -n "$LIBICONV"; then
              LIBS="$LIBS $LIBICONV"
              cat > conftest.$ac_ext <<EOF
#line 3952 "configure"
#include "confdefs.h"
#include <libintl.h>
extern int _nl_msg_cat_cntr;
extern int *_nl_domain_bindings;
extern
#ifdef __cplusplus
"C"
#endif
const char *_nl_expand_alias ();
int main() {
bindtextdomain ("", "");
return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_domain_bindings + *_nl_expand_alias (0)
; return 0; }
EOF
if { (eval echo configure:3967: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  LIBINTL="$LIBINTL $LIBICONV"
                LTLIBINTL="$LTLIBINTL $LTLIBICONV"
                gt_cv_func_gnugettext1_libintl=yes
               
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
            fi
            CPPFLAGS="$gt_save_CPPFLAGS"
            LIBS="$gt_save_LIBS"
fi

echo "$ac_t""$gt_cv_func_gnugettext1_libintl" 1>&6
        fi

                                        if test "$gt_cv_func_gnugettext1_libc" = "yes" \
           || { test "$gt_cv_func_gnugettext1_libintl" = "yes" \
                && test "$PACKAGE" != gettext; }; then
          gt_use_preinstalled_gnugettext=yes
        else
                    LIBINTL=
          LTLIBINTL=
          INCINTL=
        fi

    
        if test "$gt_use_preinstalled_gnugettext" != "yes"; then
                              nls_cv_use_gnu_gettext=yes
        fi
      fi

      if test "$nls_cv_use_gnu_gettext" = "yes"; then
                INTLOBJS="\$(GETTOBJS)"
        BUILD_INCLUDED_LIBINTL=yes
        USE_INCLUDED_LIBINTL=yes
        LIBINTL="\${top_builddir}/intl/libintl.la $LIBICONV"
        LTLIBINTL="\${top_builddir}/intl/libintl.la $LTLIBICONV"
        LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
      fi

      if test "$gt_use_preinstalled_gnugettext" = "yes" \
         || test "$nls_cv_use_gnu_gettext" = "yes"; then
                CATOBJEXT=.gmo
      fi
    

    if test "$gt_use_preinstalled_gnugettext" = "yes" \
       || test "$nls_cv_use_gnu_gettext" = "yes"; then
      cat >> confdefs.h <<\EOF
#define ENABLE_NLS 1
EOF

    else
      USE_NLS=no
    fi
  fi

  if test "$USE_NLS" = "yes"; then

    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
      if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then
        echo $ac_n "checking how to link with libintl""... $ac_c" 1>&6
echo "configure:4033: checking how to link with libintl" >&5
        echo "$ac_t""$LIBINTL" 1>&6
        
  for element in $INCINTL; do
    haveit=
    for x in $CPPFLAGS; do
      
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  eval x=\"$x\"
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"

      if test "X$x" = "X$element"; then
        haveit=yes
        break
      fi
    done
    if test -z "$haveit"; then
      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
    fi
  done

      fi

            cat >> confdefs.h <<\EOF
#define HAVE_GETTEXT 1
EOF

      cat >> confdefs.h <<\EOF
#define HAVE_DCGETTEXT 1
EOF

    fi

        POSUB=po
  fi

  
            if test "$PACKAGE" = gettext; then
      BUILD_INCLUDED_LIBINTL=yes
    fi

        
    
    
    

        nls_cv_header_intl=
    nls_cv_header_libgt=

        DATADIRNAME=share
    

        INSTOBJEXT=.mo
    

        GENCAT=gencat
    

        INTL_LIBTOOL_SUFFIX_PREFIX=l
    
  

    INTLLIBS="$LIBINTL"
  

    
  
  



echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:4109: checking whether to enable maintainer-specific portions of Makefiles" >&5
    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
  enableval="$enable_maintainer_mode"
  USE_MAINTAINER_MODE=$enableval
else
  USE_MAINTAINER_MODE=no
fi

  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
  

if test $USE_MAINTAINER_MODE = yes; then
  MAINTAINER_MODE_TRUE=
  MAINTAINER_MODE_FALSE='#'
else
  MAINTAINER_MODE_TRUE='#'
  MAINTAINER_MODE_FALSE=
fi
  MAINT=$MAINTAINER_MODE_TRUE
  


	

if test x = y; then
  INSIDE_GNOME_COMMON_TRUE=
  INSIDE_GNOME_COMMON_FALSE='#'
else
  INSIDE_GNOME_COMMON_TRUE='#'
  INSIDE_GNOME_COMMON_FALSE=
fi

	test -n "$ACLOCAL_FLAGS" && ACLOCAL="$ACLOCAL $ACLOCAL_FLAGS"

	for k in macros ; do ACLOCAL="$ACLOCAL -I $k" ; done


# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:4159: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test -f $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'



# Check whether --enable-static or --disable-static was given.
if test "${enable_static+set}" = set; then
  enableval="$enable_static"
  p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_static=no
fi

# Find the correct PATH separator.  Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
  UNAME=${UNAME-`uname 2>/dev/null`}
  case X$UNAME in
    *-DOS) lt_cv_sys_path_separator=';' ;;
    *)     lt_cv_sys_path_separator=':' ;;
  esac
  PATH_SEPARATOR=$lt_cv_sys_path_separator
fi

echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
echo "configure:4248: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4253 "configure"
#include "confdefs.h"

int main() {

#ifndef __CYGWIN__
#define __CYGWIN__ __CYGWIN32__
#endif
return __CYGWIN__;
; return 0; }
EOF
if { (eval echo configure:4264: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_cygwin=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_cygwin=no
fi
rm -f conftest*
rm -f conftest*
fi

echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
echo "configure:4281: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4286 "configure"
#include "confdefs.h"

int main() {
return __MINGW32__;
; return 0; }
EOF
if { (eval echo configure:4293: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_mingw32=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_mingw32=no
fi
rm -f conftest*
rm -f conftest*
fi

echo "$ac_t""$ac_cv_mingw32" 1>&6
MINGW32=
test "$ac_cv_mingw32" = yes && MINGW32=yes
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
  enableval="$enable_shared"
  p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_shared=yes
fi

# Check whether --enable-fast-install or --disable-fast-install was given.
if test "${enable_fast_install+set}" = set; then
  enableval="$enable_fast_install"
  p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
  enable_fast_install=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_fast_install=yes
fi

echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:4356: checking build system type" >&5

build_alias=$build
case "$build_alias" in
NONE)
  case $nonopt in
  NONE) build_alias=$host_alias ;;
  *) build_alias=$nonopt ;;
  esac ;;
esac

build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6

# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
  withval="$with_gnu_ld"
  test "$withval" = no || with_gnu_ld=yes
else
  with_gnu_ld=no
fi

ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:4385: checking for ld used by GCC" >&5
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:4415: checking for GNU ld" >&5
else
  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:4418: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi

LD="$lt_cv_path_LD"
if test -n "$LD"; then
  echo "$ac_t""$LD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:4453: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  lt_cv_prog_gnu_ld=yes
else
  lt_cv_prog_gnu_ld=no
fi
fi

echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
with_gnu_ld=$lt_cv_prog_gnu_ld


echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
echo "configure:4470: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  lt_cv_ld_reload_flag='-r'
fi

echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"

echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:4482: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$NM"; then
  # Let the user override the test.
  lt_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    tmp_nm=$ac_dir/${ac_tool_prefix}nm
    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      # Tru64's nm complains that /dev/null is an invalid object file
      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
	lt_cv_path_NM="$tmp_nm -B"
	break
      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	lt_cv_path_NM="$tmp_nm -p"
	break
      else
	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi

NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6

echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:4520: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
  rm -f conftestdata
  ac_cv_prog_LN_S="ln -s"
else
  ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
echo "configure:4541: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.

case $host_os in
aix4* | aix5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

beos*)
  lt_cv_deplibs_check_method=pass_all
  ;;

bsdi4*)
  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  lt_cv_file_magic_test_file=/shlib/libc.so
  ;;

cygwin* | mingw* | pw32*)
  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
  lt_cv_file_magic_cmd='$OBJDUMP -f'
  ;;

darwin* | rhapsody*)
  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  case "$host_os" in
  rhapsody* | darwin1.[012])
    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
    ;;
  *) # Darwin 1.3 on
    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
    ;;
  esac
  ;;

freebsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    case $host_cpu in
    i*86 )
      # Not sure whether the presence of OpenBSD here was a mistake.
      # Let's accept both of them until this is cleared up.
      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
      lt_cv_file_magic_cmd=/usr/bin/file
      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
      ;;
    esac
  else
    lt_cv_deplibs_check_method=pass_all
  fi
  ;;

gnu*)
  lt_cv_deplibs_check_method=pass_all
  ;;

hpux10.20*|hpux11*)
  lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libc.sl
  ;;

irix5* | irix6*)
  case $host_os in
  irix5*)
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
    ;;
  *)
    case $LD in
    *-32|*"-32 ") libmagic=32-bit;;
    *-n32|*"-n32 ") libmagic=N32;;
    *-64|*"-64 ") libmagic=64-bit;;
    *) libmagic=never-match;;
    esac
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
    ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
  lt_cv_deplibs_check_method=pass_all
  ;;

# This must be Linux ELF.
linux-gnu*)
  case $host_cpu in
  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
    lt_cv_deplibs_check_method=pass_all ;;
  *)
    # glibc up to 2.1.1 does not perform some relocations on ARM
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
  ;;

netbsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
  else
    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
  fi
  ;;

newos6*)
  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libnls.so
  ;;

openbsd*)
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
  else
    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
  fi
  ;;

osf3* | osf4* | osf5*)
  # this will be overridden with pass_all, but let us keep it just in case
  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
  lt_cv_file_magic_test_file=/shlib/libc.so
  lt_cv_deplibs_check_method=pass_all
  ;;

sco3.2v5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

solaris*)
  lt_cv_deplibs_check_method=pass_all
  lt_cv_file_magic_test_file=/lib/libc.so
  ;;

sysv5uw[78]* | sysv4*uw2*)
  lt_cv_deplibs_check_method=pass_all
  ;;

sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
  case $host_vendor in
  motorola)
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
    ;;
  ncr)
    lt_cv_deplibs_check_method=pass_all
    ;;
  sequent)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
    ;;
  sni)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
    lt_cv_file_magic_test_file=/lib/libc.so
    ;;
  esac
  ;;
esac

fi

echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method

echo $ac_n "checking for object suffix""... $ac_c" 1>&6
echo "configure:4724: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
if { (eval echo configure:4730: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  for ac_file in conftest.*; do
    case $ac_file in
    *.c) ;;
    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
    esac
  done
else
  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_objext" 1>&6
OBJEXT=$ac_cv_objext
ac_objext=$ac_cv_objext



echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
echo "configure:4750: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
  ac_cv_exeext=.exe
else
  rm -f conftest*
  echo 'int main () { return 0; }' > conftest.$ac_ext
  ac_cv_exeext=
  if { (eval echo configure:4760: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
    for file in conftest.*; do
      case $file in
      *.c | *.o | *.obj) ;;
      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
      esac
    done
  else
    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
  fi
  rm -f conftest*
  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
fi
fi

EXEEXT=""
test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
echo "$ac_t""${ac_cv_exeext}" 1>&6
ac_exeext=$EXEEXT

if test $host != $build; then
  ac_tool_prefix=${host_alias}-
else
  ac_tool_prefix=
fi




# Check for command to grab the raw symbol name followed by C symbol from nm.
echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
echo "configure:4791: checking command to parse $NM output" >&5
if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix.  What could be older than Ultrix?!! ;)]

# Character class describing NM global symbol codes.
symcode='[BCDEGRST]'

# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'

# Transform the above into a raw symbol and a C symbol.
symxfrm='\1 \2\3 \3'

# Transform an extracted symbol line into a proper C declaration
lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"

# Transform an extracted symbol line into symbol name and symbol address
lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"

# Define system-specific variables.
case $host_os in
aix*)
  symcode='[BCDT]'
  ;;
cygwin* | mingw* | pw32*)
  symcode='[ABCDGISTW]'
  ;;
hpux*) # Its linker distinguishes data from code symbols
  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
  ;;
irix*)
  symcode='[BCDEGRST]'
  ;;
solaris* | sysv5*)
  symcode='[BDT]'
  ;;
sysv4)
  symcode='[DFNSTU]'
  ;;
esac

# Handle CRLF in mingw tool chain
opt_cr=
case $host_os in
mingw*)
  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
  ;;
esac

# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
  symcode='[ABCDGISTW]'
fi

# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do

  # Write the raw and C identifiers.
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"

  # Check to see that the pipe works correctly.
  pipe_works=no
  rm -f conftest*
  cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF

  if { (eval echo configure:4871: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    # Now try to grab the symbols.
    nlist=conftest.nm
    if { (eval echo configure:4874: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
      # Try sorting and uniquifying the output.
      if sort "$nlist" | uniq > "$nlist"T; then
	mv -f "$nlist"T "$nlist"
      else
	rm -f "$nlist"T
      fi

      # Make sure that we snagged all the symbols we need.
      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
	  cat <<EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif

EOF
	  # Now generate the symbol file.
	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'

	  cat <<EOF >> conftest.$ac_ext
#if defined (__STDC__) && __STDC__
# define lt_ptr void *
#else
# define lt_ptr char *
# define const
#endif

/* The mapping between symbol names and symbols. */
const struct {
  const char *name;
  lt_ptr address;
}
lt_preloaded_symbols[] =
{
EOF
	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
	  cat <<\EOF >> conftest.$ac_ext
  {0, (lt_ptr) 0}
};

#ifdef __cplusplus
}
#endif
EOF
	  # Now try linking the two files.
	  mv conftest.$ac_objext conftstm.$ac_objext
	  save_LIBS="$LIBS"
	  save_CFLAGS="$CFLAGS"
	  LIBS="conftstm.$ac_objext"
	  CFLAGS="$CFLAGS$no_builtin_flag"
	  if { (eval echo configure:4925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
	    pipe_works=yes
	  fi
	  LIBS="$save_LIBS"
	  CFLAGS="$save_CFLAGS"
	else
	  echo "cannot find nm_test_func in $nlist" >&5
	fi
      else
	echo "cannot find nm_test_var in $nlist" >&5
      fi
    else
      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
    fi
  else
    echo "$progname: failed program was:" >&5
    cat conftest.$ac_ext >&5
  fi
  rm -f conftest* conftst*

  # Do not use the global_symbol_pipe unless it works.
  if test "$pipe_works" = yes; then
    break
  else
    lt_cv_sys_global_symbol_pipe=
  fi
done

fi

global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
if test -z "$lt_cv_sys_global_symbol_pipe"; then
  global_symbol_to_cdecl=
  global_symbol_to_c_name_address=
else
  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
fi
if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
then
  echo "$ac_t""failed" 1>&6
else
  echo "$ac_t""ok" 1>&6
fi

for ac_hdr in dlfcn.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:4974: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4979 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:4984: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done





# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
echo "configure:5019: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case $MAGIC_CMD in
  /*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
  ?:/*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
  ;;
  *)
  ac_save_MAGIC_CMD="$MAGIC_CMD"
  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="/usr/bin:$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/${ac_tool_prefix}file; then
      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    egrep "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS="$ac_save_ifs"
  MAGIC_CMD="$ac_save_MAGIC_CMD"
  ;;
esac
fi

MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  echo "$ac_t""$MAGIC_CMD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$lt_cv_path_MAGIC_CMD"; then
  if test -n "$ac_tool_prefix"; then
    echo $ac_n "checking for file""... $ac_c" 1>&6
echo "configure:5081: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case $MAGIC_CMD in
  /*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
  ?:/*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
  ;;
  *)
  ac_save_MAGIC_CMD="$MAGIC_CMD"
  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="/usr/bin:$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/file; then
      lt_cv_path_MAGIC_CMD="$ac_dir/file"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    egrep "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS="$ac_save_ifs"
  MAGIC_CMD="$ac_save_MAGIC_CMD"
  ;;
esac
fi

MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  echo "$ac_t""$MAGIC_CMD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  else
    MAGIC_CMD=:
  fi
fi

  fi
  ;;
esac

# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5152: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


if test -z "$ac_cv_prog_RANLIB"; then
if test -n "$ac_tool_prefix"; then
  # Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5184: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

else
  RANLIB=":"
fi
fi

# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5219: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$STRIP"; then
  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
STRIP="$ac_cv_prog_STRIP"
if test -n "$STRIP"; then
  echo "$ac_t""$STRIP" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


if test -z "$ac_cv_prog_STRIP"; then
if test -n "$ac_tool_prefix"; then
  # Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5251: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$STRIP"; then
  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_STRIP="strip"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
fi
fi
STRIP="$ac_cv_prog_STRIP"
if test -n "$STRIP"; then
  echo "$ac_t""$STRIP" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

else
  STRIP=":"
fi
fi


enable_dlopen=yes
enable_win32_dll=no

# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
  enableval="$enable_libtool_lock"
  :
fi

test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 5300 "configure"' > conftest.$ac_ext
  if { (eval echo configure:5301: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    case `/usr/bin/file conftest.$ac_objext` in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
echo "configure:5322: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
     ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

     cat > conftest.$ac_ext <<EOF
#line 5335 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:5342: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  lt_cv_cc_needs_belf=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  lt_cv_cc_needs_belf=no
fi
rm -f conftest*
     ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

fi

echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;


esac

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e s/^X//'
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'

# Same as above, but do not quote variable references.
double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'

# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# Constants:
rm="rm -f"

# Global variables:
default_ofile=libtool
can_build_shared=yes

# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
ofile="$default_ofile"
with_gnu_ld="$lt_cv_prog_gnu_ld"
need_locks="$enable_libtool_lock"

old_CC="$CC"
old_CFLAGS="$CFLAGS"

# Set sane defaults for various variables
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
test -z "$LN_S" && LN_S="ln -s"
test -z "$MAGIC_CMD" && MAGIC_CMD=file
test -z "$NM" && NM=nm
test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$RANLIB" && RANLIB=:
test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o

if test x"$host" != x"$build"; then
  ac_tool_prefix=${host_alias}-
else
  ac_tool_prefix=
fi

# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
case $host_os in
linux-gnu*) ;;
linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
esac

case $host_os in
aix3*)
  # AIX sometimes has problems with the GCC collect2 program.  For some
  # reason, if we set the COLLECT_NAMES environment variable, the problems
  # vanish in a puff of smoke.
  if test "X${COLLECT_NAMES+set}" != Xset; then
    COLLECT_NAMES=
    export COLLECT_NAMES
  fi
  ;;
esac

# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=

if test -n "$RANLIB"; then
  case $host_os in
  openbsd*)
    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
    ;;
  *)
    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
    ;;
  esac
  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi

# Allow CC to be a program name with arguments.
set dummy $CC
compiler="$2"

echo $ac_n "checking for objdir""... $ac_c" 1>&6
echo "configure:5462: checking for objdir" >&5
rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
  objdir=.libs
else
  # MS-DOS does not allow filenames that begin with a dot.
  objdir=_libs
fi
rmdir .libs 2>/dev/null
echo "$ac_t""$objdir" 1>&6


# Check whether --with-pic or --without-pic was given.
if test "${with_pic+set}" = set; then
  withval="$with_pic"
  pic_mode="$withval"
else
  pic_mode=default
fi

test -z "$pic_mode" && pic_mode=default

# We assume here that the value for lt_cv_prog_cc_pic will not be cached
# in isolation, and that seeing it set (from the cache) indicates that
# the associated values are set (in the cache) correctly too.
echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6
echo "configure:5489: checking for $compiler option to produce PIC" >&5
if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
   lt_cv_prog_cc_pic=
  lt_cv_prog_cc_shlib=
  lt_cv_prog_cc_wl=
  lt_cv_prog_cc_static=
  lt_cv_prog_cc_no_builtin=
  lt_cv_prog_cc_can_build_shared=$can_build_shared

  if test "$GCC" = yes; then
    lt_cv_prog_cc_wl='-Wl,'
    lt_cv_prog_cc_static='-static'

    case $host_os in
    aix*)
      # Below there is a dirty hack to force normal static linking with -ldl
      # The problem is because libdl dynamically linked with both libc and
      # libC (AIX C++ library), which obviously doesn't included in libraries
      # list by gcc. This cause undefined symbols with -static flags.
      # This hack allows C programs to be linked with "-static -ldl", but
      # not sure about C++ programs.
      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
      ;;
    amigaos*)
      # FIXME: we need at least 68020 code to build shared libraries, but
      # adding the `-m68020' flag to GCC prevents building anything better,
      # like `-m68040'.
      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
      ;;
    beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;
    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      lt_cv_prog_cc_pic='-fno-common'
      ;;
    cygwin* | mingw* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      lt_cv_prog_cc_pic='-DDLL_EXPORT'
      ;;
    sysv4*MP*)
      if test -d /usr/nec; then
	 lt_cv_prog_cc_pic=-Kconform_pic
      fi
      ;;
    *)
      lt_cv_prog_cc_pic='-fPIC'
      ;;
    esac
  else
    # PORTME Check for PIC flags for the system compiler.
    case $host_os in
    aix3* | aix4* | aix5*)
      lt_cv_prog_cc_wl='-Wl,'
      # All AIX code is PIC.
      if test "$host_cpu" = ia64; then
	# AIX 5 now supports IA64 processor
	lt_cv_prog_cc_static='-Bstatic'
      else
	lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
      fi
      ;;

    hpux9* | hpux10* | hpux11*)
      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
      lt_cv_prog_cc_pic='+Z'
      ;;

    irix5* | irix6*)
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static='-non_shared'
      # PIC (with -KPIC) is the default.
      ;;

    cygwin* | mingw* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      lt_cv_prog_cc_pic='-DDLL_EXPORT'
      ;;

    newsos6)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      ;;

    osf3* | osf4* | osf5*)
      # All OSF/1 code is PIC.
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static='-non_shared'
      ;;

    sco3.2v5*)
      lt_cv_prog_cc_pic='-Kpic'
      lt_cv_prog_cc_static='-dn'
      lt_cv_prog_cc_shlib='-belf'
      ;;

    solaris*)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      lt_cv_prog_cc_wl='-Wl,'
      ;;

    sunos4*)
      lt_cv_prog_cc_pic='-PIC'
      lt_cv_prog_cc_static='-Bstatic'
      lt_cv_prog_cc_wl='-Qoption ld '
      ;;

    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      if test "x$host_vendor" = xsni; then
	lt_cv_prog_cc_wl='-LD'
      else
	lt_cv_prog_cc_wl='-Wl,'
      fi
      ;;

    uts4*)
      lt_cv_prog_cc_pic='-pic'
      lt_cv_prog_cc_static='-Bstatic'
      ;;

    sysv4*MP*)
      if test -d /usr/nec ;then
	lt_cv_prog_cc_pic='-Kconform_pic'
	lt_cv_prog_cc_static='-Bstatic'
      fi
      ;;

    *)
      lt_cv_prog_cc_can_build_shared=no
      ;;
    esac
  fi

fi

if test -z "$lt_cv_prog_cc_pic"; then
  echo "$ac_t""none" 1>&6
else
  echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6

  # Check to make sure the pic_flag actually works.
  echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6
echo "configure:5641: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
  if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
      save_CFLAGS="$CFLAGS"
    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
    cat > conftest.$ac_ext <<EOF
#line 5648 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:5655: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
        case $host_os in
      hpux9* | hpux10* | hpux11*)
	# On HP-UX, both CC and GCC only warn that PIC is supported... then
	# they create non-PIC objects.  So, if there were any warnings, we
	# assume that PIC is not supported.
	if test -s conftest.err; then
	  lt_cv_prog_cc_pic_works=no
	else
	  lt_cv_prog_cc_pic_works=yes
	fi
	;;
      *)
	lt_cv_prog_cc_pic_works=yes
	;;
      esac
    
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
        lt_cv_prog_cc_pic_works=no
    
fi
rm -f conftest*
    CFLAGS="$save_CFLAGS"
  
fi


  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
    lt_cv_prog_cc_pic=
    lt_cv_prog_cc_can_build_shared=no
  else
    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
  fi

  echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6
fi

# Check for any special shared library compilation flags.
if test -n "$lt_cv_prog_cc_shlib"; then
  echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2
  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$lt_cv_prog_cc_shlib[ 	]" >/dev/null; then :
  else
   echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
    lt_cv_prog_cc_can_build_shared=no
  fi
fi

echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6
echo "configure:5707: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    lt_cv_prog_cc_static_works=no
  save_LDFLAGS="$LDFLAGS"
  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
  cat > conftest.$ac_ext <<EOF
#line 5715 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:5722: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  lt_cv_prog_cc_static_works=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
  LDFLAGS="$save_LDFLAGS"

fi


# Belt *and* braces to stop my trousers falling down:
test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6

pic_flag="$lt_cv_prog_cc_pic"
special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
wl="$lt_cv_prog_cc_wl"
link_static_flag="$lt_cv_prog_cc_static"
no_builtin_flag="$lt_cv_prog_cc_no_builtin"
can_build_shared="$lt_cv_prog_cc_can_build_shared"


# Check to see if options -o and -c are simultaneously supported by compiler
echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6
echo "configure:5749: checking if $compiler supports -c -o file.$ac_objext" >&5
if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
$rm -r conftest 2>/dev/null
mkdir conftest
cd conftest
echo "int some_variable = 0;" > conftest.$ac_ext
mkdir out
# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
# that will create temporary files in the current directory regardless of
# the output directory.  Thus, making CWD read-only will cause this test
# to fail, enabling locking or at least warning the user not to do parallel
# builds.
chmod -w .
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
compiler_c_o=no
if { (eval echo configure:5768: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
  # The compiler can only warn and ignore the option if not recognized
  # So say no if there are warnings
  if test -s out/conftest.err; then
    lt_cv_compiler_c_o=no
  else
    lt_cv_compiler_c_o=yes
  fi
else
  # Append any errors to the config.log.
  cat out/conftest.err 1>&5
  lt_cv_compiler_c_o=no
fi
CFLAGS="$save_CFLAGS"
chmod u+w .
$rm conftest* out/*
rmdir out
cd ..
rmdir conftest
$rm -r conftest 2>/dev/null

fi

compiler_c_o=$lt_cv_compiler_c_o
echo "$ac_t""$compiler_c_o" 1>&6

if test x"$compiler_c_o" = x"yes"; then
  # Check to see if we can write to a .lo
  echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6
echo "configure:5797: checking if $compiler supports -c -o file.lo" >&5
  if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
  lt_cv_compiler_o_lo=no
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -c -o conftest.lo"
  save_objext="$ac_objext"
  ac_objext=lo
  cat > conftest.$ac_ext <<EOF
#line 5808 "configure"
#include "confdefs.h"

int main() {
int some_variable = 0;
; return 0; }
EOF
if { (eval echo configure:5815: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
      # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
    if test -s conftest.err; then
      lt_cv_compiler_o_lo=no
    else
      lt_cv_compiler_o_lo=yes
    fi
  
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
  ac_objext="$save_objext"
  CFLAGS="$save_CFLAGS"
  
fi

  compiler_o_lo=$lt_cv_compiler_o_lo
  echo "$ac_t""$compiler_o_lo" 1>&6
else
  compiler_o_lo=no
fi

# Check to see if we can do hard links to lock some files if needed
hard_links="nottested"
if test "$compiler_c_o" = no && test "$need_locks" != no; then
  # do not overwrite the value of need_locks provided by the user
  echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6
echo "configure:5846: checking if we can lock with hard links" >&5
  hard_links=yes
  $rm conftest*
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  touch conftest.a
  ln conftest.a conftest.b 2>&5 || hard_links=no
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  echo "$ac_t""$hard_links" 1>&6
  if test "$hard_links" = no; then
    echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2
    need_locks=warn
  fi
else
  need_locks=no
fi

if test "$GCC" = yes; then
  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6
echo "configure:5865: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
  echo "int some_variable = 0;" > conftest.$ac_ext
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
  compiler_rtti_exceptions=no
  cat > conftest.$ac_ext <<EOF
#line 5871 "configure"
#include "confdefs.h"

int main() {
int some_variable = 0;
; return 0; }
EOF
if { (eval echo configure:5878: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
      # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
    if test -s conftest.err; then
      compiler_rtti_exceptions=no
    else
      compiler_rtti_exceptions=yes
    fi
  
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
  CFLAGS="$save_CFLAGS"
  echo "$ac_t""$compiler_rtti_exceptions" 1>&6

  if test "$compiler_rtti_exceptions" = "yes"; then
    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
  else
    no_builtin_flag=' -fno-builtin'
  fi
fi

# See if the linker supports building shared libraries.
echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
echo "configure:5905: checking whether the linker ($LD) supports shared libraries" >&5

allow_undefined_flag=
no_undefined_flag=
need_lib_prefix=unknown
need_version=unknown
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
archive_cmds=
archive_expsym_cmds=
old_archive_from_new_cmds=
old_archive_from_expsyms_cmds=
export_dynamic_flag_spec=
whole_archive_flag_spec=
thread_safe_flag_spec=
hardcode_into_libs=no
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
hardcode_direct=no
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
runpath_var=
link_all_deplibs=unknown
always_export_symbols=no
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an egrep regular expression of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced.  Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=

case $host_os in
cygwin* | mingw* | pw32*)
  # FIXME: the MSVC++ port hasn't been tested in a loooong time
  # When not using gcc, we currently assume that we are using
  # Microsoft Visual C++.
  if test "$GCC" != yes; then
    with_gnu_ld=no
  fi
  ;;
openbsd*)
  with_gnu_ld=no
  ;;
esac

ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
  # If archive_cmds runs LD, not CC, wlarc should be empty
  wlarc='${wl}'

  # See if GNU ld supports shared libraries.
  case $host_os in
  aix3* | aix4* | aix5*)
    # On AIX, the GNU linker is very broken
    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
    ld_shlibs=no
    cat <<EOF 1>&2

*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support.  If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.

EOF
    ;;

  amigaos*)
    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes

    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
    # that the semantics of dynamic libraries on AmigaOS, at least up
    # to version 4, is to share data among multiple programs linked
    # with the same dynamic library.  Since this doesn't match the
    # behavior of shared libraries on other platforms, we can use
    # them.
    ld_shlibs=no
    ;;

  beos*)
    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      allow_undefined_flag=unsupported
      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
      # support --undefined.  This deserves some investigation.  FIXME
      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
    else
      ld_shlibs=no
    fi
    ;;

  cygwin* | mingw* | pw32*)
    # hardcode_libdir_flag_spec is actually meaningless, as there is
    # no search path for DLLs.
    hardcode_libdir_flag_spec='-L$libdir'
    allow_undefined_flag=unsupported
    always_export_symbols=yes

    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
      else $CC -o impgen impgen.c ; fi)~
      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'

    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'

    # cygwin and mingw dlls have different entry points and sets of symbols
    # to exclude.
    # FIXME: what about values for MSVC?
    dll_entry=__cygwin_dll_entry@12
    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
    case $host_os in
    mingw*)
      # mingw values
      dll_entry=_DllMainCRTStartup@12
      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
      ;;
    esac

    # mingw and cygwin differ, and it's simplest to just exclude the union
    # of the two symbol sets.
    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12

    # recent cygwin and mingw systems supply a stub DllMain which the user
    # can override, but on older systems we have to supply one (in ltdll.c)
    if test "x$lt_cv_need_dllmain" = "xyes"; then
      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
    else
      ltdll_obj=
      ltdll_cmds=
    fi

    # Extract the symbol export list from an `--export-all' def file,
    # then regenerate the def file from the symbol export list, so that
    # the compiled dll only exports the symbol export list.
    # Be careful not to strip the DATA tag left be newer dlltools.
    export_symbols_cmds="$ltdll_cmds"'
      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'

    # If the export-symbols file already is a .def file (1st line
    # is EXPORTS), use it as is.
    # If DATA tags from a recent dlltool are present, honour them!
    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
	cp $export_symbols $output_objdir/$soname-def;
      else
	echo EXPORTS > $output_objdir/$soname-def;
	_lt_hint=1;
	cat $export_symbols | while read symbol; do
	 set dummy \$symbol;
	 case \$# in
	   2) echo "   \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
	   *) echo "     \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
	 esac;
	 _lt_hint=`expr 1 + \$_lt_hint`;
	done;
      fi~
      '"$ltdll_cmds"'
      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
    ;;

  netbsd*)
    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
      wlarc=
    else
      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    fi
    ;;

  solaris* | sysv5*)
    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
      ld_shlibs=no
      cat <<EOF 1>&2

*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems.  Therefore, libtool
*** is disabling shared libraries support.  We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer.  Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.

EOF
    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    else
      ld_shlibs=no
    fi
    ;;

  sunos4*)
    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
    wlarc=
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  *)
    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    else
      ld_shlibs=no
    fi
    ;;
  esac

  if test "$ld_shlibs" = yes; then
    runpath_var=LD_RUN_PATH
    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
    export_dynamic_flag_spec='${wl}--export-dynamic'
    case $host_os in
    cygwin* | mingw* | pw32*)
      # dlltool doesn't understand --whole-archive et. al.
      whole_archive_flag_spec=
      ;;
    *)
      # ancient GNU ld didn't support --whole-archive et. al.
      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
      else
	whole_archive_flag_spec=
      fi
      ;;
    esac
  fi
else
  # PORTME fill in a description of your system's linker (not GNU ld)
  case $host_os in
  aix3*)
    allow_undefined_flag=unsupported
    always_export_symbols=yes
    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
    # Note: this linker hardcodes the directories in LIBPATH if there
    # are no directories specified by -L.
    hardcode_minus_L=yes
    if test "$GCC" = yes && test -z "$link_static_flag"; then
      # Neither direct hardcoding nor static linking is supported with a
      # broken collect2.
      hardcode_direct=unsupported
    fi
    ;;

  aix4* | aix5*)
    if test "$host_cpu" = ia64; then
      # On IA64, the linker does run time linking by default, so we don't
      # have to do anything special.
      aix_use_runtimelinking=no
      exp_sym_flag='-Bexport'
      no_entry_flag=""
    else
      aix_use_runtimelinking=no

      # Test if we are trying to use run time linking or normal
      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
      # need to do runtime linking.
      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
	for ld_flag in $LDFLAGS; do
	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
	    aix_use_runtimelinking=yes
	    break
	  fi
	done
      esac

      exp_sym_flag='-bexport'
      no_entry_flag='-bnoentry'
    fi

    # When large executables or shared objects are built, AIX ld can
    # have problems creating the table of contents.  If linking a library
    # or program results in "error TOC overflow" add -mminimal-toc to
    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

    hardcode_direct=yes
    archive_cmds=''
    hardcode_libdir_separator=':'
    if test "$GCC" = yes; then
      case $host_os in aix4.[012]|aix4.[012].*)
	collect2name=`${CC} -print-prog-name=collect2`
	if test -f "$collect2name" && \
	  strings "$collect2name" | grep resolve_lib_name >/dev/null
	then
	  # We have reworked collect2
	  hardcode_direct=yes
	else
	  # We have old collect2
	  hardcode_direct=unsupported
	  # It fails to find uninstalled libraries when the uninstalled
	  # path is not listed in the libpath.  Setting hardcode_minus_L
	  # to unsupported forces relinking
	  hardcode_minus_L=yes
	  hardcode_libdir_flag_spec='-L$libdir'
	  hardcode_libdir_separator=
	fi
      esac

      shared_flag='-shared'
    else
      # not using gcc
      if test "$host_cpu" = ia64; then
	shared_flag='${wl}-G'
      else
	if test "$aix_use_runtimelinking" = yes; then
	  shared_flag='${wl}-G'
	else
	  shared_flag='${wl}-bM:SRE'
	fi
      fi
    fi

    # It seems that -bexpall can do strange things, so it is better to
    # generate a list of symbols to export.
    always_export_symbols=yes
    if test "$aix_use_runtimelinking" = yes; then
      # Warning - without using the other runtime loading flags (-brtl),
      # -berok will link without error, but may produce a broken library.
      allow_undefined_flag='-berok'
      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
    else
      if test "$host_cpu" = ia64; then
	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
	allow_undefined_flag="-z nodefs"
	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
      else
	hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
	# Warning - without using the other run time loading flags,
	# -berok will link without error, but may produce a broken library.
	allow_undefined_flag='${wl}-berok'
	# This is a bit strange, but is similar to how AIX traditionally builds
	# it's shared libraries.
	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
      fi
    fi
    ;;

  amigaos*)
    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes
    # see comment about different semantics on the GNU ld section
    ld_shlibs=no
    ;;

  cygwin* | mingw* | pw32*)
    # When not using gcc, we currently assume that we are using
    # Microsoft Visual C++.
    # hardcode_libdir_flag_spec is actually meaningless, as there is
    # no search path for DLLs.
    hardcode_libdir_flag_spec=' '
    allow_undefined_flag=unsupported
    # Tell ltmain to make .lib files, not .a files.
    libext=lib
    # FIXME: Setting linknames here is a bad hack.
    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
    # The linker will automatically build a .lib file if we build a DLL.
    old_archive_from_new_cmds='true'
    # FIXME: Should let the user specify the lib program.
    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
    fix_srcfile_path='`cygpath -w "$srcfile"`'
    ;;

  darwin* | rhapsody*)
    case "$host_os" in
    rhapsody* | darwin1.[012])
      allow_undefined_flag='-undefined suppress'
      ;;
    *) # Darwin 1.3 on
      allow_undefined_flag='-flat_namespace -undefined suppress'
      ;;
    esac
    # FIXME: Relying on posixy $() will cause problems for
    #        cross-compilation, but unfortunately the echo tests do not
    #        yet detect zsh echo's removal of \ escapes.
    archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
    # We need to add '_' to the symbols in $export_symbols first
    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    whole_archive_flag_spec='-all_load $convenience'
    ;;

  freebsd1*)
    ld_shlibs=no
    ;;

  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
  # support.  Future versions do this automatically, but an explicit c++rt0.o
  # does not break anything, and helps significantly (at the cost of a little
  # extra space).
  freebsd2.2*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
  freebsd2*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
    hardcode_direct=yes
    hardcode_minus_L=yes
    hardcode_shlibpath_var=no
    ;;

  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
  freebsd*)
    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  hpux9* | hpux10* | hpux11*)
    case $host_os in
    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
    esac
    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
    hardcode_libdir_separator=:
    hardcode_direct=yes
    hardcode_minus_L=yes # Not in the search PATH, but as the default
			 # location of the library.
    export_dynamic_flag_spec='${wl}-E'
    ;;

  irix5* | irix6*)
    if test "$GCC" = yes; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
    else
      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
    fi
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    link_all_deplibs=yes
    ;;

  netbsd*)
    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
    else
      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
    fi
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  newsos6)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_direct=yes
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    hardcode_shlibpath_var=no
    ;;

  openbsd*)
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
      export_dynamic_flag_spec='${wl}-E'
    else
      case "$host_os" in
      openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
	hardcode_libdir_flag_spec='-R$libdir'
        ;;
      *)
        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
        ;;
      esac
    fi
    ;;

  os2*)
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes
    allow_undefined_flag=unsupported
    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
    ;;

  osf3*)
    if test "$GCC" = yes; then
      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
    else
      allow_undefined_flag=' -expect_unresolved \*'
      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
    fi
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    ;;

  osf4* | osf5*)	# as osf3* with the addition of -msym flag
    if test "$GCC" = yes; then
      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    else
      allow_undefined_flag=' -expect_unresolved \*'
      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'

      #Both c and cxx compiler support -rpath directly
      hardcode_libdir_flag_spec='-rpath $libdir'
    fi
    hardcode_libdir_separator=:
    ;;

  sco3.2v5*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_shlibpath_var=no
    runpath_var=LD_RUN_PATH
    hardcode_runpath_var=yes
    export_dynamic_flag_spec='${wl}-Bexport'
    ;;

  solaris*)
    # gcc --version < 3.0 without binutils cannot create self contained
    # shared libraries reliably, requiring libgcc.a to resolve some of
    # the object symbols generated in some cases.  Libraries that use
    # assert need libgcc.a to resolve __eprintf, for example.  Linking
    # a copy of libgcc.a into every shared library to guarantee resolving
    # such symbols causes other problems:  According to Tim Van Holder
    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
    # (to the application) exception stack for one thing.
    no_undefined_flag=' -z defs'
    if test "$GCC" = yes; then
      case `$CC --version 2>/dev/null` in
      [12].*)
	cat <<EOF 1>&2

*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
*** create self contained shared libraries on Solaris systems, without
*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
*** -no-undefined support, which will at least allow you to build shared
*** libraries.  However, you may find that when you link such libraries
*** into an application without using GCC, you have to manually add
*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
*** upgrade to a newer version of GCC.  Another option is to rebuild your
*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.

EOF
        no_undefined_flag=
	;;
      esac
    fi
    # $CC -shared without GNU ld will not create a library from C++
    # object files and a static libstdc++, better avoid it by now
    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_shlibpath_var=no
    case $host_os in
    solaris2.[0-5] | solaris2.[0-5].*) ;;
    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
    esac
    link_all_deplibs=yes
    ;;

  sunos4*)
    if test "x$host_vendor" = xsequent; then
      # Use $CC to link under sequent, because it throws in some extra .o
      # files that make .init and .fini sections work.
      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
    else
      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
    fi
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_direct=yes
    hardcode_minus_L=yes
    hardcode_shlibpath_var=no
    ;;

  sysv4)
    if test "x$host_vendor" = xsno; then
      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_direct=yes # is this really true???
    else
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_direct=no #Motorola manual says yes, but my tests say they lie
    fi
    runpath_var='LD_RUN_PATH'
    hardcode_shlibpath_var=no
    ;;

  sysv4.3*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_shlibpath_var=no
    export_dynamic_flag_spec='-Bexport'
    ;;

  sysv5*)
    no_undefined_flag=' -z text'
    # $CC -shared without GNU ld will not create a library from C++
    # object files and a static libstdc++, better avoid it by now
    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
    hardcode_libdir_flag_spec=
    hardcode_shlibpath_var=no
    runpath_var='LD_RUN_PATH'
    ;;

  uts4*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_shlibpath_var=no
    ;;

  dgux*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_shlibpath_var=no
    ;;

  sysv4*MP*)
    if test -d /usr/nec; then
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_shlibpath_var=no
      runpath_var=LD_RUN_PATH
      hardcode_runpath_var=yes
      ld_shlibs=yes
    fi
    ;;

  sysv4.2uw2*)
    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
    hardcode_direct=yes
    hardcode_minus_L=no
    hardcode_shlibpath_var=no
    hardcode_runpath_var=yes
    runpath_var=LD_RUN_PATH
    ;;

  sysv5uw7* | unixware7*)
    no_undefined_flag='${wl}-z ${wl}text'
    if test "$GCC" = yes; then
      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
    else
      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
    fi
    runpath_var='LD_RUN_PATH'
    hardcode_shlibpath_var=no
    ;;

  *)
    ld_shlibs=no
    ;;
  esac
fi
echo "$ac_t""$ld_shlibs" 1>&6
test "$ld_shlibs" = no && can_build_shared=no

# Check hardcoding attributes.
echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
echo "configure:6589: checking how to hardcode library paths into programs" >&5
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
   test -n "$runpath_var"; then

  # We can hardcode non-existant directories.
  if test "$hardcode_direct" != no &&
     # If the only mechanism to avoid hardcoding is shlibpath_var, we
     # have to relink, otherwise we might link with an installed library
     # when we should be linking with a yet-to-be-installed one
     ## test "$hardcode_shlibpath_var" != no &&
     test "$hardcode_minus_L" != no; then
    # Linking always hardcodes the temporary library directory.
    hardcode_action=relink
  else
    # We can link without hardcoding, and we can hardcode nonexisting dirs.
    hardcode_action=immediate
  fi
else
  # We cannot hardcode anything, or else we can only hardcode existing
  # directories.
  hardcode_action=unsupported
fi
echo "$ac_t""$hardcode_action" 1>&6

striplib=
old_striplib=
echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
echo "configure:6617: checking whether stripping libraries is possible" >&5
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

reload_cmds='$LD$reload_flag -o $output$reload_objs'
test -z "$deplibs_check_method" && deplibs_check_method=unknown

# PORTME Fill in your ld.so characteristics
echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
echo "configure:6631: checking dynamic linker characteristics" >&5
library_names_spec=
libname_spec='lib$name'
soname_spec=
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"

case $host_os in
aix3*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix $libname.a'
  shlibpath_var=LIBPATH

  # AIX has no versioning support, so we append a major version to the name.
  soname_spec='${libname}${release}.so$major'
  ;;

aix4* | aix5*)
  version_type=linux
  if test "$host_cpu" = ia64; then
    # AIX 5 supports IA64
    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
    shlibpath_var=LD_LIBRARY_PATH
  else
    # With GCC up to 2.95.x, collect2 would create an import file
    # for dependence libraries.  The import file would start with
    # the line `#! .'.  This would cause the generated library to
    # depend on `.', always an invalid library.  This was fixed in
    # development snapshots of GCC prior to 3.0.
    case $host_os in
      aix4 | aix4.[01] | aix4.[01].*)
	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
	     echo ' yes '
	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
	  :
	else
	  can_build_shared=no
	fi
	;;
    esac
    # AIX (on Power*) has no versioning support, so currently we can
    # not hardcode correct soname into executable. Probably we can
    # add versioning support to collect2, so additional links can
    # be useful in future.
    if test "$aix_use_runtimelinking" = yes; then
      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
      # instead of lib<name>.a to let people know that these are not
      # typical AIX shared libraries.
      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
    else
      # We preserve .a as extension for shared libraries through AIX4.2
      # and later when we are not doing run time linking.
      library_names_spec='${libname}${release}.a $libname.a'
      soname_spec='${libname}${release}.so$major'
    fi
    shlibpath_var=LIBPATH
  fi
  ;;

amigaos*)
  library_names_spec='$libname.ixlibrary $libname.a'
  # Create ${libname}_ixlibrary.a entries in /sys/libs.
  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
  ;;

beos*)
  library_names_spec='${libname}.so'
  dynamic_linker="$host_os ld.so"
  shlibpath_var=LIBRARY_PATH
  ;;

bsdi4*)
  version_type=linux
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
  export_dynamic_flag_spec=-rdynamic
  # the default ld.so.conf also contains /usr/contrib/lib and
  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
  # libtool to hard-code these into programs
  ;;

cygwin* | mingw* | pw32*)
  version_type=windows
  need_version=no
  need_lib_prefix=no
  case $GCC,$host_os in
  yes,cygwin*)
    library_names_spec='$libname.dll.a'
    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
      dldir=$destdir/`dirname \$dlpath`~
      test -d \$dldir || mkdir -p \$dldir~
      $install_prog .libs/$dlname \$dldir/$dlname'
    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
      dlpath=$dir/\$dldll~
       $rm \$dlpath'
    ;;
  yes,mingw*)
    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
    ;;
  yes,pw32*)
    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
    ;;
  *)
    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
    ;;
  esac
  dynamic_linker='Win32 ld.exe'
  # FIXME: first we should search . and the directory the executable is in
  shlibpath_var=PATH
  ;;

darwin* | rhapsody*)
  dynamic_linker="$host_os dyld"
  version_type=darwin
  need_lib_prefix=no
  need_version=no
  # FIXME: Relying on posixy $() will cause problems for
  #        cross-compilation, but unfortunately the echo tests do not
  #        yet detect zsh echo's removal of \ escapes.
  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
  shlibpath_overrides_runpath=yes
  shlibpath_var=DYLD_LIBRARY_PATH
  ;;

freebsd1*)
  dynamic_linker=no
  ;;

freebsd*)
  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
  version_type=freebsd-$objformat
  case $version_type in
    freebsd-elf*)
      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
      need_version=no
      need_lib_prefix=no
      ;;
    freebsd-*)
      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
      need_version=yes
      ;;
  esac
  shlibpath_var=LD_LIBRARY_PATH
  case $host_os in
  freebsd2*)
    shlibpath_overrides_runpath=yes
    ;;
  *)
    shlibpath_overrides_runpath=no
    hardcode_into_libs=yes
    ;;
  esac
  ;;

gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  hardcode_into_libs=yes
  ;;

hpux9* | hpux10* | hpux11*)
  # Give a soname corresponding to the major version so that dld.sl refuses to
  # link against other versions.
  dynamic_linker="$host_os dld.sl"
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  shlibpath_var=SHLIB_PATH
  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
  soname_spec='${libname}${release}.sl$major'
  # HP-UX runs *really* slowly unless shared libraries are mode 555.
  postinstall_cmds='chmod 555 $lib'
  ;;

irix5* | irix6*)
  version_type=irix
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
  case $host_os in
  irix5*)
    libsuff= shlibsuff=
    ;;
  *)
    case $LD in # libtool.m4 will add one of these switches to LD
    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
    *) libsuff= shlibsuff= libmagic=never-match;;
    esac
    ;;
  esac
  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
  shlibpath_overrides_runpath=no
  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
  ;;

# No shared lib support for Linux oldld, aout, or coff.
linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
  dynamic_linker=no
  ;;

# This must be Linux ELF.
linux-gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  # This implies no fast_install, which is unacceptable.
  # Some rework will be needed to allow for fast_install
  # before this can be enabled.
  hardcode_into_libs=yes

  # We used to test for /lib/ld.so.1 and disable shared libraries on
  # powerpc, because MkLinux only supported shared libraries with the
  # GNU dynamic linker.  Since this was broken with cross compilers,
  # most powerpc-linux boxes support dynamic linking these days and
  # people can always --disable-shared, the test was removed, and we
  # assume the GNU/Linux dynamic linker is in use.
  dynamic_linker='GNU/Linux ld.so'
  ;;

netbsd*)
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
    dynamic_linker='NetBSD (a.out) ld.so'
  else
    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
    soname_spec='${libname}${release}.so$major'
    dynamic_linker='NetBSD ld.elf_so'
  fi
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  ;;

newsos6)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

openbsd*)
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
    case "$host_os" in
    openbsd2.[89] | openbsd2.[89].*)
      shlibpath_overrides_runpath=no
      ;;
    *)
      shlibpath_overrides_runpath=yes
      ;;
    esac
  else
    shlibpath_overrides_runpath=yes
  fi
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

os2*)
  libname_spec='$name'
  need_lib_prefix=no
  library_names_spec='$libname.dll $libname.a'
  dynamic_linker='OS/2 ld.exe'
  shlibpath_var=LIBPATH
  ;;

osf3* | osf4* | osf5*)
  version_type=osf
  need_version=no
  soname_spec='${libname}${release}.so'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
  ;;

sco3.2v5*)
  version_type=osf
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

solaris*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  # ldd complains unless libraries are executable
  postinstall_cmds='chmod +x $lib'
  ;;

sunos4*)
  version_type=sunos
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  if test "$with_gnu_ld" = yes; then
    need_lib_prefix=no
  fi
  need_version=yes
  ;;

sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  case $host_vendor in
    sni)
      shlibpath_overrides_runpath=no
      ;;
    motorola)
      need_lib_prefix=no
      need_version=no
      shlibpath_overrides_runpath=no
      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
      ;;
  esac
  ;;

uts4*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

dgux*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

sysv4*MP*)
  if test -d /usr/nec ;then
    version_type=linux
    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
    soname_spec='$libname.so.$major'
    shlibpath_var=LD_LIBRARY_PATH
  fi
  ;;

*)
  dynamic_linker=no
  ;;
esac
echo "$ac_t""$dynamic_linker" 1>&6
test "$dynamic_linker" = no && can_build_shared=no

# Report the final consequences.
echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6
echo "configure:7028: checking if libtool supports shared libraries" >&5
echo "$ac_t""$can_build_shared" 1>&6

echo $ac_n "checking whether to build shared libraries""... $ac_c" 1>&6
echo "configure:7032: checking whether to build shared libraries" >&5
test "$can_build_shared" = "no" && enable_shared=no

# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case "$host_os" in
aix3*)
  test "$enable_shared" = yes && enable_static=no
  if test -n "$RANLIB"; then
    archive_cmds="$archive_cmds~\$RANLIB \$lib"
    postinstall_cmds='$RANLIB $lib'
  fi
  ;;

aix4*)
  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
    test "$enable_shared" = yes && enable_static=no
  fi
  ;;
esac
echo "$ac_t""$enable_shared" 1>&6

echo $ac_n "checking whether to build static libraries""... $ac_c" 1>&6
echo "configure:7055: checking whether to build static libraries" >&5
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
echo "$ac_t""$enable_static" 1>&6

if test "$hardcode_action" = relink; then
  # Fast installation is not supported
  enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
     test "$enable_shared" = no; then
  # Fast installation is not necessary
  enable_fast_install=needless
fi

variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi

if test "x$enable_dlopen" != xyes; then
  enable_dlopen=unknown
  enable_dlopen_self=unknown
  enable_dlopen_self_static=unknown
else
  lt_cv_dlopen=no
  lt_cv_dlopen_libs=

  case $host_os in
  beos*)
    lt_cv_dlopen="load_add_on"
    lt_cv_dlopen_libs=
    lt_cv_dlopen_self=yes
    ;;

  cygwin* | mingw* | pw32*)
    lt_cv_dlopen="LoadLibrary"
    lt_cv_dlopen_libs=
   ;;

  *)
    echo $ac_n "checking for shl_load""... $ac_c" 1>&6
echo "configure:7096: checking for shl_load" >&5
if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 7101 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char shl_load(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shl_load();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_shl_load) || defined (__stub___shl_load)
choke me
#else
shl_load();
#endif

; return 0; }
EOF
if { (eval echo configure:7124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_shl_load=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_shl_load=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="shl_load"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
echo "configure:7142: checking for shl_load in -ldld" >&5
ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 7150 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shl_load();

int main() {
shl_load()
; return 0; }
EOF
if { (eval echo configure:7161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen""... $ac_c" 1>&6
echo "configure:7180: checking for dlopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 7185 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char dlopen(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_dlopen) || defined (__stub___dlopen)
choke me
#else
dlopen();
#endif

; return 0; }
EOF
if { (eval echo configure:7208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_dlopen=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_dlopen=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dlopen"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
echo "configure:7226: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 7234 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo configure:7245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
echo "configure:7264: checking for dlopen in -lsvld" >&5
ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsvld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 7272 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo configure:7283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
echo "configure:7302: checking for dld_link in -ldld" >&5
ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 7310 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dld_link();

int main() {
dld_link()
; return 0; }
EOF
if { (eval echo configure:7321: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
else
  echo "$ac_t""no" 1>&6
fi

	      
fi

	    
fi

	  
fi

	
fi

      
fi

    ;;
  esac

  if test "x$lt_cv_dlopen" != xno; then
    enable_dlopen=yes
  else
    enable_dlopen=no
  fi

  case $lt_cv_dlopen in
  dlopen)
    save_CPPFLAGS="$CPPFLAGS"
        test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"

    save_LDFLAGS="$LDFLAGS"
    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"

    save_LIBS="$LIBS"
    LIBS="$lt_cv_dlopen_libs $LIBS"

    echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
echo "configure:7377: checking whether a program can dlopen itself" >&5
if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 7387 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#ifdef RTLD_GLOBAL
#  define LT_DLGLOBAL		RTLD_GLOBAL
#else
#  ifdef DL_GLOBAL
#    define LT_DLGLOBAL		DL_GLOBAL
#  else
#    define LT_DLGLOBAL		0
#  endif
#endif

/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
#  ifdef RTLD_LAZY
#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
#  else
#    ifdef DL_LAZY
#      define LT_DLLAZY_OR_NOW		DL_LAZY
#    else
#      ifdef RTLD_NOW
#        define LT_DLLAZY_OR_NOW	RTLD_NOW
#      else
#        ifdef DL_NOW
#          define LT_DLLAZY_OR_NOW	DL_NOW
#        else
#          define LT_DLLAZY_OR_NOW	0
#        endif
#      endif
#    endif
#  endif
#endif

#ifdef __cplusplus
extern "C" void exit (int);
#endif

void fnord() { int i=42;}
int main ()
{
  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
  int status = $lt_dlunknown;

  if (self)
    {
      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
      /* dlclose (self); */
    }

    exit (status);
}
EOF
  if { (eval echo configure:7448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
    (./conftest; exit; ) 2>/dev/null
    lt_status=$?
    case x$lt_status in
      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
    esac
  else :
    # compilation failed
    lt_cv_dlopen_self=no
  fi
fi
rm -fr conftest*

    
fi

echo "$ac_t""$lt_cv_dlopen_self" 1>&6

    if test "x$lt_cv_dlopen_self" = xyes; then
      LDFLAGS="$LDFLAGS $link_static_flag"
      echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
echo "configure:7471: checking whether a statically linked program can dlopen itself" >&5
if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 7481 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#ifdef RTLD_GLOBAL
#  define LT_DLGLOBAL		RTLD_GLOBAL
#else
#  ifdef DL_GLOBAL
#    define LT_DLGLOBAL		DL_GLOBAL
#  else
#    define LT_DLGLOBAL		0
#  endif
#endif

/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
#  ifdef RTLD_LAZY
#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
#  else
#    ifdef DL_LAZY
#      define LT_DLLAZY_OR_NOW		DL_LAZY
#    else
#      ifdef RTLD_NOW
#        define LT_DLLAZY_OR_NOW	RTLD_NOW
#      else
#        ifdef DL_NOW
#          define LT_DLLAZY_OR_NOW	DL_NOW
#        else
#          define LT_DLLAZY_OR_NOW	0
#        endif
#      endif
#    endif
#  endif
#endif

#ifdef __cplusplus
extern "C" void exit (int);
#endif

void fnord() { int i=42;}
int main ()
{
  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
  int status = $lt_dlunknown;

  if (self)
    {
      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
      /* dlclose (self); */
    }

    exit (status);
}
EOF
  if { (eval echo configure:7542: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
    (./conftest; exit; ) 2>/dev/null
    lt_status=$?
    case x$lt_status in
      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
    esac
  else :
    # compilation failed
    lt_cv_dlopen_self_static=no
  fi
fi
rm -fr conftest*

      
fi

echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
    fi

    CPPFLAGS="$save_CPPFLAGS"
    LDFLAGS="$save_LDFLAGS"
    LIBS="$save_LIBS"
    ;;
  esac

  case $lt_cv_dlopen_self in
  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
  *) enable_dlopen_self=unknown ;;
  esac

  case $lt_cv_dlopen_self_static in
  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
  *) enable_dlopen_self_static=unknown ;;
  esac
fi


if test "$enable_shared" = yes && test "$GCC" = yes; then
  case $archive_cmds in
  *'~'*)
    # FIXME: we may have to deal with multi-command sequences.
    ;;
  '$CC '*)
    # Test whether the compiler implicitly links with -lc since on some
    # systems, -lgcc has to come before -lc. If gcc already passes -lc
    # to ld, don't add -lc before -lgcc.
    echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6
echo "configure:7591: checking whether -lc should be explicitly linked in" >&5
    if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  $rm conftest*
    echo 'static int dummy;' > conftest.$ac_ext

    if { (eval echo configure:7598: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
      soname=conftest
      lib=conftest
      libobjs=conftest.$ac_objext
      deplibs=
      wl=$lt_cv_prog_cc_wl
      compiler_flags=-v
      linker_flags=-v
      verstring=
      output_objdir=.
      libname=conftest
      save_allow_undefined_flag=$allow_undefined_flag
      allow_undefined_flag=
      if { (eval echo configure:7611: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
      then
	lt_cv_archive_cmds_need_lc=no
      else
	lt_cv_archive_cmds_need_lc=yes
      fi
      allow_undefined_flag=$save_allow_undefined_flag
    else
      cat conftest.err 1>&5
    fi
fi

    echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6
    ;;
  esac
fi
need_lc=${lt_cv_archive_cmds_need_lc-yes}

# The second clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
  :
else
  # If there is no Makefile yet, we rely on a make rule to execute
  # `config.status --recheck' to rerun these tests and create the
  # libtool script then.
  test -f Makefile && make "$ltmain"
fi

if test -f "$ltmain"; then
  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
  $rm -f "${ofile}T"

  echo creating $ofile

  # Now quote all the things that may contain metacharacters while being
  # careful not to overquote the AC_SUBSTed values.  We take copies of the
  # variables and quote the copies for generation of the libtool script.
  for var in echo old_CC old_CFLAGS \
    AR AR_FLAGS CC LD LN_S NM SHELL \
    reload_flag reload_cmds wl \
    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
    library_names_spec soname_spec \
    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
    old_striplib striplib file_magic_cmd export_symbols_cmds \
    deplibs_check_method allow_undefined_flag no_undefined_flag \
    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
    global_symbol_to_c_name_address \
    hardcode_libdir_flag_spec hardcode_libdir_separator  \
    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do

    case $var in
    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
    old_postinstall_cmds | old_postuninstall_cmds | \
    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
    postinstall_cmds | postuninstall_cmds | \
    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
      # Double-quote double-evaled strings.
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
      ;;
    *)
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
      ;;
    esac
  done

  cat <<__EOF__ > "${ofile}T"
#! $SHELL

# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996-2000 Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="sed -e s/^X//"

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

# ### BEGIN LIBTOOL CONFIG

# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:

# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to build static libraries.
build_old_libs=$enable_static

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$need_lc

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# The host system.
host_alias=$host_alias
host=$host

# An echo program that does not interpret backslashes.
echo=$lt_echo

# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS

# The default C compiler.
CC=$lt_CC

# Is the compiler the GNU C compiler?
with_gcc=$GCC

# The linker used to build libraries.
LD=$lt_LD

# Whether we need hard or soft links.
LN_S=$lt_LN_S

# A BSD-compatible nm program.
NM=$lt_NM

# A symbol stripping program
STRIP=$STRIP

# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD

# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"

# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"

# Used on cygwin: assembler.
AS="$AS"

# The name of the directory that contains temporary libtool files.
objdir=$objdir

# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds

# How to pass a linker flag through the compiler.
wl=$lt_wl

# Object file suffix (normally "o").
objext="$ac_objext"

# Old archive suffix (normally "a").
libext="$libext"

# Executable file suffix (normally "").
exeext="$exeext"

# Additional compiler flags for building library objects.
pic_flag=$lt_pic_flag
pic_mode=$pic_mode

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_compiler_c_o

# Can we write directly to a .lo ?
compiler_o_lo=$lt_compiler_o_lo

# Must we lock files when doing compilation ?
need_locks=$lt_need_locks

# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix

# Do we need a version for libraries?
need_version=$need_version

# Whether dlopen is supported.
dlopen_support=$enable_dlopen

# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_link_static_flag

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_no_builtin_flag

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec

# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec

# Library versioning type.
version_type=$version_type

# Format of library name prefix.
libname_spec=$lt_libname_spec

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec

# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds

# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds

# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method

# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag

# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds

# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_global_symbol_pipe

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_global_symbol_to_cdecl

# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address

# This is the shared library runtime path variable.
runpath_var=$runpath_var

# This is the shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator

# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var

# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs

# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path"

# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms

# ### END LIBTOOL CONFIG

__EOF__

  case $host_os in
  aix3*)
    cat <<\EOF >> "${ofile}T"

# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
EOF
    ;;
  esac

  case $host_os in
  cygwin* | mingw* | pw32* | os2*)
    cat <<'EOF' >> "${ofile}T"
      # This is a source program that is used to create dlls on Windows
      # Don't remove nor modify the starting and closing comments
# /* ltdll.c starts here */
# #define WIN32_LEAN_AND_MEAN
# #include <windows.h>
# #undef WIN32_LEAN_AND_MEAN
# #include <stdio.h>
#
# #ifndef __CYGWIN__
# #  ifdef __CYGWIN32__
# #    define __CYGWIN__ __CYGWIN32__
# #  endif
# #endif
#
# #ifdef __cplusplus
# extern "C" {
# #endif
# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
# #ifdef __cplusplus
# }
# #endif
#
# #ifdef __CYGWIN__
# #include <cygwin/cygwin_dll.h>
# DECLARE_CYGWIN_DLL( DllMain );
# #endif
# HINSTANCE __hDllInstance_base;
#
# BOOL APIENTRY
# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
# {
#   __hDllInstance_base = hInst;
#   return TRUE;
# }
# /* ltdll.c ends here */
	# This is a source program that is used to create import libraries
	# on Windows for dlls which lack them. Don't remove nor modify the
	# starting and closing comments
# /* impgen.c starts here */
# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
#
#  This file is part of GNU libtool.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#  */
#
# #include <stdio.h>		/* for printf() */
# #include <unistd.h>		/* for open(), lseek(), read() */
# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
# #include <string.h>		/* for strdup() */
#
# /* O_BINARY isn't required (or even defined sometimes) under Unix */
# #ifndef O_BINARY
# #define O_BINARY 0
# #endif
#
# static unsigned int
# pe_get16 (fd, offset)
#      int fd;
#      int offset;
# {
#   unsigned char b[2];
#   lseek (fd, offset, SEEK_SET);
#   read (fd, b, 2);
#   return b[0] + (b[1]<<8);
# }
#
# static unsigned int
# pe_get32 (fd, offset)
#     int fd;
#     int offset;
# {
#   unsigned char b[4];
#   lseek (fd, offset, SEEK_SET);
#   read (fd, b, 4);
#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
# }
#
# static unsigned int
# pe_as32 (ptr)
#      void *ptr;
# {
#   unsigned char *b = ptr;
#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
# }
#
# int
# main (argc, argv)
#     int argc;
#     char *argv[];
# {
#     int dll;
#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
#     unsigned long export_rva, export_size, nsections, secptr, expptr;
#     unsigned long name_rvas, nexp;
#     unsigned char *expdata, *erva;
#     char *filename, *dll_name;
#
#     filename = argv[1];
#
#     dll = open(filename, O_RDONLY|O_BINARY);
#     if (dll < 1)
# 	return 1;
#
#     dll_name = filename;
#
#     for (i=0; filename[i]; i++)
# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
# 	    dll_name = filename + i +1;
#
#     pe_header_offset = pe_get32 (dll, 0x3c);
#     opthdr_ofs = pe_header_offset + 4 + 20;
#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
#
#     if (num_entries < 1) /* no exports */
# 	return 1;
#
#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
#     export_size = pe_get32 (dll, opthdr_ofs + 100);
#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
#     secptr = (pe_header_offset + 4 + 20 +
# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
#
#     expptr = 0;
#     for (i = 0; i < nsections; i++)
#     {
# 	char sname[8];
# 	unsigned long secptr1 = secptr + 40 * i;
# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
# 	lseek(dll, secptr1, SEEK_SET);
# 	read(dll, sname, 8);
# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
# 	{
# 	    expptr = fptr + (export_rva - vaddr);
# 	    if (export_rva + export_size > vaddr + vsize)
# 		export_size = vsize - (export_rva - vaddr);
# 	    break;
# 	}
#     }
#
#     expdata = (unsigned char*)malloc(export_size);
#     lseek (dll, expptr, SEEK_SET);
#     read (dll, expdata, export_size);
#     erva = expdata - export_rva;
#
#     nexp = pe_as32 (expdata+24);
#     name_rvas = pe_as32 (expdata+32);
#
#     printf ("EXPORTS\n");
#     for (i = 0; i<nexp; i++)
#     {
# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
#     }
#
#     return 0;
# }
# /* impgen.c ends here */

EOF
    ;;
  esac

  # We use sed instead of cat because bash on DJGPP gets confused if
  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
  # text mode, it properly converts lines to CR/LF.  This bash problem
  # is reportedly fixed, but why not run on old versions too?
  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)

  mv -f "${ofile}T" "$ofile" || \
    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
  chmod +x "$ofile"
fi





# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'

# Prevent multiple expansion






        echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
echo "configure:8197: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcposix  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 8205 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char strerror();

int main() {
strerror()
; return 0; }
EOF
if { (eval echo configure:8216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBS="$LIBS -lcposix"
else
  echo "$ac_t""no" 1>&6
fi

  

echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
echo "configure:8239: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
#line 8246 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
 bogus endian macros
#endif
; return 0; }
EOF
if { (eval echo configure:8257: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  # It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
#line 8261 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {

#if BYTE_ORDER != BIG_ENDIAN
 not big endian
#endif
; return 0; }
EOF
if { (eval echo configure:8272: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_c_bigendian=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_c_bigendian=no
fi
rm -f conftest*
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
if test $ac_cv_c_bigendian = unknown; then
if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 8292 "configure"
#include "confdefs.h"
main () {
  /* Are we little or big endian?  From Harbison&Steele.  */
  union
  {
    long l;
    char c[sizeof (long)];
  } u;
  u.l = 1;
  exit (u.c[sizeof (long) - 1] == 1);
}
EOF
if { (eval echo configure:8305: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_c_bigendian=no
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_c_bigendian=yes
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_c_bigendian" 1>&6
if test $ac_cv_c_bigendian = yes; then
  cat >> confdefs.h <<\EOF
#define WORDS_BIGENDIAN 1
EOF

fi

echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:8329: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi

echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:8356: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 8361 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:8369: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  ac_cv_header_stdc=yes
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

if test $ac_cv_header_stdc = yes; then
  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 8386 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "memchr" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 8404 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "free" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
  :
else
  cat > conftest.$ac_ext <<EOF
#line 8425 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }

EOF
if { (eval echo configure:8436: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_header_stdc=no
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
  cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF

fi


for ac_hdr in limits.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:8464: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 8469 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:8474: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_func in stpcpy memcpy timegm towupper
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:8503: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 8508 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:8531: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done



  echo $ac_n "checking for the tm_gmtoff member of struct tm""... $ac_c" 1>&6
echo "configure:8558: checking for the tm_gmtoff member of struct tm" >&5
if eval "test \"`echo '$''{'am_cv_struct_tm_gmtoff'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 8563 "configure"
#include "confdefs.h"

        #include <time.h>
        #define _GNU_SOURCE
        #define __EXTENSIONS__

int main() {
struct tm tm;
       tm.tm_gmtoff = 0;
; return 0; }
EOF
if { (eval echo configure:8575: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  am_cv_struct_tm_gmtoff=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  am_cv_struct_tm_gmtoff=no
fi
rm -f conftest*
    
fi

echo "$ac_t""$am_cv_struct_tm_gmtoff" 1>&6
  if test $am_cv_struct_tm_gmtoff = yes; then
    cat >> confdefs.h <<\EOF
#define HAVE_STRUCT_TM_GMTOFF 1
EOF

  fi


  echo $ac_n "checking if scanf supports %lld conversions""... $ac_c" 1>&6
echo "configure:8598: checking if scanf supports %lld conversions" >&5
if eval "test \"`echo '$''{'am_cv_scanf_lld'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 8606 "configure"
#include "confdefs.h"

#include <stdio.h>
#include <stdlib.h>

int main ()
{
  long long int d;

  d = 0;
  if ((sscanf ("10000000000", "%lld", &d) != 1) || (d != 10000000000))
    exit (1);

  exit (0);
}

EOF
if { (eval echo configure:8624: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  am_cv_scanf_lld=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  am_cv_scanf_lld=no
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$am_cv_scanf_lld" 1>&6
  if test $am_cv_scanf_lld = yes; then
    cat >> confdefs.h <<\EOF
#define HAVE_SCANF_LLD 1
EOF

  fi


for ac_hdr in ltdl.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:8651: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 8656 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:8661: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

if test "x$ac_cv_header_ltdl_h" = xno; then
  { echo "configure: error: Cannot find ltdl.h -- libtool-devel not installed?" 1>&2; exit 1; }
fi

# Check whether --with-glib-prefix or --without-glib-prefix was given.
if test "${with_glib_prefix+set}" = set; then
  withval="$with_glib_prefix"
  glib_config_prefix="$withval"
else
  glib_config_prefix=""
fi

# Check whether --with-glib-exec-prefix or --without-glib-exec-prefix was given.
if test "${with_glib_exec_prefix+set}" = set; then
  withval="$with_glib_exec_prefix"
  glib_config_exec_prefix="$withval"
else
  glib_config_exec_prefix=""
fi

# Check whether --enable-glibtest or --disable-glibtest was given.
if test "${enable_glibtest+set}" = set; then
  enableval="$enable_glibtest"
  :
else
  enable_glibtest=yes
fi


  if test x$glib_config_exec_prefix != x ; then
     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
     if test x${GLIB_CONFIG+set} != xset ; then
        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
     fi
  fi
  if test x$glib_config_prefix != x ; then
     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
     if test x${GLIB_CONFIG+set} != xset ; then
        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
     fi
  fi

  for module in . 
  do
      case "$module" in
         gmodule) 
             glib_config_args="$glib_config_args gmodule"
         ;;
         gthread) 
             glib_config_args="$glib_config_args gthread"
         ;;
      esac
  done

  # Extract the first word of "glib-config", so it can be a program name with args.
set dummy glib-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:8744: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GLIB_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GLIB_CONFIG" in
  /*)
  ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GLIB_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GLIB_CONFIG" && ac_cv_path_GLIB_CONFIG="no"
  ;;
esac
fi
GLIB_CONFIG="$ac_cv_path_GLIB_CONFIG"
if test -n "$GLIB_CONFIG"; then
  echo "$ac_t""$GLIB_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  min_glib_version=0.99.7
  echo $ac_n "checking for GLIB - version >= $min_glib_version""... $ac_c" 1>&6
echo "configure:8779: checking for GLIB - version >= $min_glib_version" >&5
  no_glib=""
  if test "$GLIB_CONFIG" = "no" ; then
    no_glib=yes
  else
    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
    if test "x$enable_glibtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GLIB_CFLAGS"
      LIBS="$GLIB_LIBS $LIBS"
      rm -f conf.glibtest
      if test "$cross_compiling" = yes; then
  echo $ac_n "cross compiling; assumed OK... $ac_c"
else
  cat > conftest.$ac_ext <<EOF
#line 8802 "configure"
#include "confdefs.h"

#include <glib.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.glibtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_glib_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_glib_version");
     exit(1);
   }

  if ((glib_major_version != $glib_config_major_version) ||
      (glib_minor_version != $glib_config_minor_version) ||
      (glib_micro_version != $glib_config_micro_version))
    {
      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
             glib_major_version, glib_minor_version, glib_micro_version);
      printf ("*** was found! If glib-config was correct, then it is best\n");
      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    } 
  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
	   (glib_minor_version != GLIB_MINOR_VERSION) ||
           (glib_micro_version != GLIB_MICRO_VERSION))
    {
      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     glib_major_version, glib_minor_version, glib_micro_version);
    }
  else
    {
      if ((glib_major_version > major) ||
        ((glib_major_version == major) && (glib_minor_version > minor)) ||
        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
               glib_major_version, glib_minor_version, glib_micro_version);
        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
        printf("*** correct copy of glib-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}

EOF
if { (eval echo configure:8878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_glib=yes
fi
rm -fr conftest*
fi

       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_glib" = x ; then
     echo "$ac_t""yes" 1>&6
     :     
  else
     echo "$ac_t""no" 1>&6
     if test "$GLIB_CONFIG" = "no" ; then
       echo "*** The glib-config script installed by GLIB could not be found"
       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
       echo "*** full path to glib-config."
     else
       if test -f conf.glibtest ; then
        :
       else
          echo "*** Could not run GLIB test program, checking why..."
          CFLAGS="$CFLAGS $GLIB_CFLAGS"
          LIBS="$LIBS $GLIB_LIBS"
          cat > conftest.$ac_ext <<EOF
#line 8912 "configure"
#include "confdefs.h"

#include <glib.h>
#include <stdio.h>

int main() {
 return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); 
; return 0; }
EOF
if { (eval echo configure:8922: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" 
fi
rm -f conftest*
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GLIB_CFLAGS=""
     GLIB_LIBS=""
     :
  fi
  
  
  rm -f conf.glibtest


if test ${no_glib}x = yesx
then
  { echo "configure: error: Cannot find glib. Check config.log" 1>&2; exit 1; }
fi

for ac_hdr in dlfcn.h dl.h ghttp_ssl.h utmp.h locale.h mcheck.h unistd.h wctype.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:8970: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 8975 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:8980: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


DL_LIB=
for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:9011: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9016 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:9039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
echo "configure:9061: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9069 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo configure:9080: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  DL_LIB="-ldl"
else
  echo "$ac_t""no" 1>&6

    echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
echo "configure:9100: checking for shl_load in -ldld" >&5
ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9108 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shl_load();

int main() {
shl_load()
; return 0; }
EOF
if { (eval echo configure:9119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  DL_LIB="-ldld"
else
  echo "$ac_t""no" 1>&6

      for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:9141: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9146 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:9169: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 DL_LIB=""
else
  echo "$ac_t""no" 1>&6
{ echo "configure: error: Dynamic linking is not available on this platform.  Some apps" 1>&2; exit 1; }
fi
done

    
fi

  
fi


fi
done


oLIBS="$LIBS"
LIBS="$LIBS $DL_LIB"
for ac_func in dlerror
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:9210: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 9215 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:9238: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

LIBS="$oLIBS"


### --------------------------------------------------------------------------
### MacOS 10.x requires some special handling...

# Some systems (MacOS) require -lintl

echo $ac_n "checking for library containing gettext""... $ac_c" 1>&6
echo "configure:9271: checking for library containing gettext" >&5
if eval "test \"`echo '$''{'ac_cv_search_gettext'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_func_search_save_LIBS="$LIBS"
ac_cv_search_gettext="no"
cat > conftest.$ac_ext <<EOF
#line 9278 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char gettext();

int main() {
gettext()
; return 0; }
EOF
if { (eval echo configure:9289: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_search_gettext="none required"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
test "$ac_cv_search_gettext" = "no" && for i in intl; do
LIBS="-l$i  $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
#line 9300 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char gettext();

int main() {
gettext()
; return 0; }
EOF
if { (eval echo configure:9311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_search_gettext="-l$i"
break
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
done
LIBS="$ac_func_search_save_LIBS"
fi

echo "$ac_t""$ac_cv_search_gettext" 1>&6
if test "$ac_cv_search_gettext" != "no"; then
  test "$ac_cv_search_gettext" = "none required" || LIBS="$ac_cv_search_gettext $LIBS"
  
else :
  
	{ echo "configure: error: Cannot find gettext -- do you need to build -lintl?" 1>&2; exit 1; }
fi

echo $ac_n "checking for darwin""... $ac_c" 1>&6
echo "configure:9334: checking for darwin" >&5
case $host_os in
	rhapsody* | darwin1*)
		echo "$ac_t""yes, but too old" 1>&6
		{ echo "configure: error: This platform is not supported, please
update to latest  darwin" 1>&2; exit 1; }
		;;
	darwin*)
		echo "$ac_t""yes, patching libtool to always build dylibs" 1>&6
		mv libtool libtool.old
		sed -e 's/^deplibs_check_method.*/deplibs_check_method=pass_all/g' \
			-e 's|^archive_cmds.*|archive_cmds="$CC -dynamiclib \\$allow_undefined_flag -o \\$lib \\$libobjs \\$deplibs\\$linker_flags -install_name \\$rpath/\\$soname \\$verstring"|g' \
			-e 's|^library_names_spec.*|library_names_spec="\\$libname\\$release\\$versuffix.dylib \\$libname\\$release\\${major}.dylib \\$libname.dylib"|g' \
			-e 's|^soname_spec.*|soname_spec="\\$libname\\$release\\$major.dylib"|g' \
			< libtool.old > libtool
		rm libtool.old
		;;
	*)
		echo "$ac_t""no" 1>&6
		;;	
esac


### --------------------------------------------------------------------------
### Guile and g-wrap version checks (should this be something other than
### the Gnome check?)


	saved_ldflags="$LDFLAGS"
	saved_cppflags="$CPPFLAGS"
	LDFLAGS="$LDFLAGS $GNOME_LIBDIR"

	echo $ac_n "checking for qt_null in -lqthreads""... $ac_c" 1>&6
echo "configure:9367: checking for qt_null in -lqthreads" >&5
ac_lib_var=`echo qthreads'_'qt_null | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lqthreads $LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9375 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char qt_null();

int main() {
qt_null()
; return 0; }
EOF
if { (eval echo configure:9386: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
		QTTHREADS_LIB="-lqthreads"
	
else
  echo "$ac_t""no" 1>&6

		echo $ac_n "checking for qt_null in -lqt""... $ac_c" 1>&6
echo "configure:9408: checking for qt_null in -lqt" >&5
ac_lib_var=`echo qt'_'qt_null | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lqt  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9416 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char qt_null();

int main() {
qt_null()
; return 0; }
EOF
if { (eval echo configure:9427: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  QTTHREADS_LIB="-lqt"
else
  echo "$ac_t""no" 1>&6
fi

	
fi

	

	echo $ac_n "checking for main in -ltermcap""... $ac_c" 1>&6
echo "configure:9453: checking for main in -ltermcap" >&5
ac_lib_var=`echo termcap'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ltermcap  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9461 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
EOF
if { (eval echo configure:9468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  TERMCAP_LIB="-ltermcap"
else
  echo "$ac_t""no" 1>&6
fi

	echo $ac_n "checking for main in -lreadline""... $ac_c" 1>&6
echo "configure:9489: checking for main in -lreadline" >&5
ac_lib_var=`echo readline'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lreadline $TERMCAP_LIB $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9497 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
EOF
if { (eval echo configure:9504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  READLINE_LIB="-lreadline"
else
  echo "$ac_t""no" 1>&6
fi


	
	

	if test "x$cross_compiling" = "xyes" ; then
	  name_build_guile="$target_alias-guile-config"
	else
	  name_build_guile="guile-config"
	fi

	# Extract the first word of "$name_build_guile", so it can be a program name with args.
set dummy $name_build_guile; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:9537: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BUILD_GUILE'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$BUILD_GUILE"; then
  ac_cv_prog_BUILD_GUILE="$BUILD_GUILE" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_BUILD_GUILE="yes"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_BUILD_GUILE" && ac_cv_prog_BUILD_GUILE="no"
fi
fi
BUILD_GUILE="$ac_cv_prog_BUILD_GUILE"
if test -n "$BUILD_GUILE"; then
  echo "$ac_t""$BUILD_GUILE" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


	if test "x$BUILD_GUILE" = "xyes"; then
	    echo $ac_n "checking whether $name_build_guile works""... $ac_c" 1>&6
echo "configure:9567: checking whether $name_build_guile works" >&5
	    if test x`$name_build_guile --version >/dev/null 2>&1 || \
		echo no` = xno; then
		BUILD_GUILE=no
	    fi
	    echo "$ac_t""$BUILD_GUILE" 1>&6
	else

	    if test "x$cross_compiling" = "xyes" ; then
		name_build_guile="$target_alias-build-guile"
	    else	
		name_build_guile="build-guile"
	    fi

	    # Extract the first word of "$name_build_guile", so it can be a program name with args.
set dummy $name_build_guile; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:9584: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BUILD_GUILE'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$BUILD_GUILE"; then
  ac_cv_prog_BUILD_GUILE="$BUILD_GUILE" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_BUILD_GUILE="yes"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_BUILD_GUILE" && ac_cv_prog_BUILD_GUILE="no"
fi
fi
BUILD_GUILE="$ac_cv_prog_BUILD_GUILE"
if test -n "$BUILD_GUILE"; then
  echo "$ac_t""$BUILD_GUILE" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


	    if test "x$BUILD_GUILE" = "xyes"; then
		echo $ac_n "checking whether $name_build_guile works""... $ac_c" 1>&6
echo "configure:9614: checking whether $name_build_guile works" >&5
		if test x`$name_build_guile --version >/dev/null 2>&1 || \
	 	    echo no` = xno; then
		    BUILD_GUILE=no
		fi
		echo "$ac_t""$BUILD_GUILE" 1>&6
	    fi
	fi

	echo $ac_n "checking for sin in -lm""... $ac_c" 1>&6
echo "configure:9624: checking for sin in -lm" >&5
ac_lib_var=`echo m'_'sin | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lm  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9632 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char sin();

int main() {
sin()
; return 0; }
EOF
if { (eval echo configure:9643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_lib=HAVE_LIB`echo m | sed -e 's/[^a-zA-Z0-9_]/_/g' \
    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF

  LIBS="-lm $LIBS"

else
  echo "$ac_t""no" 1>&6
fi


	if test "x$BUILD_GUILE" = "xyes"; then
		echo $ac_n "checking for guile libraries""... $ac_c" 1>&6
echo "configure:9673: checking for guile libraries" >&5
		GUILE_LIBS="`$name_build_guile link`"
		echo "$ac_t""$GUILE_LIBS" 1>&6
		echo $ac_n "checking for guile headers""... $ac_c" 1>&6
echo "configure:9677: checking for guile headers" >&5
		GUILE_INCS="`$name_build_guile compile`"
		echo "$ac_t""$GUILE_INCS" 1>&6
	else
		GUILE_LIBS="$GNOME_LIBDIR"
		GUILE_INCS="$GNOME_INCLUDEDIR"
		echo $ac_n "checking for main in -lrx""... $ac_c" 1>&6
echo "configure:9684: checking for main in -lrx" >&5
ac_lib_var=`echo rx'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lrx  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9692 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
EOF
if { (eval echo configure:9699: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  GUILE_LIBS="-lrx $GUILE_LIBS"
else
  echo "$ac_t""no" 1>&6
fi

		echo $ac_n "checking for qt_null in -lqt""... $ac_c" 1>&6
echo "configure:9720: checking for qt_null in -lqt" >&5
ac_lib_var=`echo qt'_'qt_null | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lqt  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9728 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char qt_null();

int main() {
qt_null()
; return 0; }
EOF
if { (eval echo configure:9739: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  GUILE_LIBS="-lqt $GUILE_LIBS"
else
  echo "$ac_t""no" 1>&6
fi

		echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
echo "configure:9760: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9768 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo configure:9779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  GUILE_LIBS="-ldl $GUILE_LIBS"
else
  echo "$ac_t""no" 1>&6
fi

		echo $ac_n "checking for t_accept in -lnsl""... $ac_c" 1>&6
echo "configure:9800: checking for t_accept in -lnsl" >&5
ac_lib_var=`echo nsl'_'t_accept | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lnsl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9808 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char t_accept();

int main() {
t_accept()
; return 0; }
EOF
if { (eval echo configure:9819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  GUILE_LIBS="$GUILE_LIBS -lnsl"
else
  echo "$ac_t""no" 1>&6
fi

		echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
echo "configure:9840: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocket  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 9848 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char socket();

int main() {
socket()
; return 0; }
EOF
if { (eval echo configure:9859: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  GUILE_LIBS="$GUILE_LIBS -lsocket"
else
  echo "$ac_t""no" 1>&6
fi

		GUILE_LIBS="-lguile $GUILE_LIBS $QTTHREADS_LIB $READLINE_LIB $TERMCAP_LIB"
	fi

	
	

	saved_LIBS="$LIBS"
	LIBS="$LIBS $GUILE_LIBS"
	CPPFLAGS="$saved_cppflags $GUILE_INCS"

	echo $ac_n "checking whether guile works""... $ac_c" 1>&6
echo "configure:9890: checking whether guile works" >&5
	cat > conftest.$ac_ext <<EOF
#line 9892 "configure"
#include "confdefs.h"

		#include <libguile.h>
		#include <guile/gh.h>
	
int main() {

		gh_eval_str("(newline)");
		scm_boot_guile(0,NULL,NULL,NULL);
	
; return 0; }
EOF
if { (eval echo configure:9905: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  
		ac_cv_guile_found=yes
		cat >> confdefs.h <<\EOF
#define HAVE_GUILE 1
EOF

	
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
		ac_cv_guile_found=no
	
fi
rm -f conftest*
	echo "$ac_t""$ac_cv_guile_found" 1>&6

	if test x$ac_cv_guile_found = xno ; then
		if test x = xfail ; then
		  { echo "configure: error: Can not find Guile on this system" 1>&2; exit 1; }
		else
		  echo "configure: warning: Can not find Guile on this system" 1>&2
		fi
		ac_cv_guile_found=no
		GUILE_LIBS= GUILE_INCS=
	fi

	LIBS="$saved_LIBS"
	LDFLAGS="$saved_ldflags"
	CPPFLAGS="$saved_cppflags"

	
	

if test x$ac_cv_guile_found = xyes; then
  GUILE_TRUE=
  GUILE_FALSE='#'
else
  GUILE_TRUE='#'
  GUILE_FALSE=
fi


  GIVEN_CFLAGS=$GUILE_INCS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  GUILE_INCS=$GIVEN_CFLAGS


### --------------------------------------------------------------------------
### G-wrap (libraries and executable)

G_WRAP_COMPILE_ARGS=""
G_WRAP_LINK_ARGS=""



if test x${GUILE} = x ; then
   # Extract the first word of "guile", so it can be a program name with args.
set dummy guile; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:9973: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GUILE'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GUILE" in
  /*)
  ac_cv_path_GUILE="$GUILE" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GUILE="$GUILE" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GUILE="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GUILE" && ac_cv_path_GUILE="no"
  ;;
esac
fi
GUILE="$ac_cv_path_GUILE"
if test -n "$GUILE"; then
  echo "$ac_t""$GUILE" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

fi

version_ok=
min_guile_version=1.3.4
max_guile_version=99.99.99

echo $ac_n "checking for guile - ${min_guile_version} <= version < ${max_guile_version}""... $ac_c" 1>&6
echo "configure:10013: checking for guile - ${min_guile_version} <= version < ${max_guile_version}" >&5

if test x${BUILD_GUILE} != x -a ${BUILD_GUILE} != no ; then
  guile_version=`${name_build_guile} --version 2>&1`
  guile_version="$guile_version.0"
  guile_major_version=`echo $guile_version | \
	sed 's/.*Guile version \([0-9]*\).\([0-9]*\).\([0-9]*\).*/\1/'`
  guile_minor_version=`echo $guile_version | \
	sed 's/.*Guile version \([0-9]*\).\([0-9]*\).\([0-9]*\).*/\2/'`
  guile_micro_version=`echo $guile_version | \
	sed 's/.*Guile version \([0-9]*\).\([0-9]*\).\([0-9]*\).*/\3/'`

  major_required=`echo ${min_guile_version} |\
        sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
  minor_required=`echo ${min_guile_version} |\
	sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
  micro_required=`echo ${min_guile_version} |\
	sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`

  major_prohibited=`echo ${max_guile_version} |\
        sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
  minor_prohibited=`echo ${max_guile_version} |\
	sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
  micro_prohibited=`echo ${max_guile_version} |\
	sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`


  if ${GUILE} -c "(cond ((> ${guile_major_version} ${major_required}) (exit 0))\
	           ((< ${guile_major_version} ${major_required}) (exit 1))\
                   ((> ${guile_minor_version} ${minor_required}) (exit 0))\
		   ((< ${guile_minor_version} ${minor_required}) (exit 1))\
	           ((< ${guile_micro_version} ${micro_required}) (exit 1))\
		   (else (exit 0)))" ; then
    if ${GUILE} -c "(cond ((> ${guile_major_version} ${major_prohibited}) (exit 1))\
	           ((< ${guile_major_version} ${major_prohibited}) (exit 0))\
                   ((> ${guile_minor_version} ${minor_prohibited}) (exit 1))\
		   ((< ${guile_minor_version} ${minor_prohibited}) (exit 0))\
	           ((< ${guile_micro_version} ${micro_prohibited}) (exit 0))\
		   (else (exit 1)))" ; then
  	version_ok=yes
    fi
  fi
fi

if test -n "$version_ok"; then
	echo "$ac_t""yes" 1>&6
	true

else
	echo "$ac_t""no" 1>&6
	echo "configure: warning: guile version check failed" 1>&2
	{ echo "configure: error: 

  guile  does not appear to be installed correctly, or is not in the
  correct version range.  Perhaps you have not installed the guile
  development packages?  Right now gnucash requires at least version
  1.3.4 to build.
" 1>&2; exit 1; }
fi

# Check whether --with-g-wrap-prefix or --without-g-wrap-prefix was given.
if test "${with_g_wrap_prefix+set}" = set; then
  withval="$with_g_wrap_prefix"
  gwrap_prefix="$withval"
else
  g_wrap_prefix=""
fi


min_gwrap_version=1.3.3
max_gwrap_version=99.99.99

if test x${GUILE} = x ; then
   # Extract the first word of "guile", so it can be a program name with args.
set dummy guile; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:10089: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GUILE'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GUILE" in
  /*)
  ac_cv_path_GUILE="$GUILE" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GUILE="$GUILE" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GUILE="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GUILE" && ac_cv_path_GUILE="no"
  ;;
esac
fi
GUILE="$ac_cv_path_GUILE"
if test -n "$GUILE"; then
  echo "$ac_t""$GUILE" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

fi

CHECK_VERSION=yes

if test x${gwrap_prefix} != x ; then
   G_WRAP_CONFIG=${gwrap_prefix}/bin/g-wrap-config
else

  # Extract the first word of "g-wrap-config", so it can be a program name with args.
set dummy g-wrap-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:10133: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_G_WRAP_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$G_WRAP_CONFIG" in
  /*)
  ac_cv_path_G_WRAP_CONFIG="$G_WRAP_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_G_WRAP_CONFIG="$G_WRAP_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_G_WRAP_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_G_WRAP_CONFIG" && ac_cv_path_G_WRAP_CONFIG="no"
  ;;
esac
fi
G_WRAP_CONFIG="$ac_cv_path_G_WRAP_CONFIG"
if test -n "$G_WRAP_CONFIG"; then
  echo "$ac_t""$G_WRAP_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test x${G_WRAP_CONFIG} = xno ; then
	CHECK_VERSION=no
	echo "configure: warning: g-wrap-config failed" 1>&2
	{ echo "configure: error: 

  g-wrap does not appear to be installed correctly, or is not new
  enough.  Right now gnucash requires at least version 1.3.3 to build
  as there were major changes between version 1.3.1 and 1.3.2, and
  extra support added between 1.3.2 and 1.3.3 that is now required
  by gnucash.
  If you need to install g-wrap, you can find it at
  http://www.gnucash.org/pub/g-wrap.
" 1>&2; exit 1; }
  fi
fi

version_ok=
if test x$CHECK_VERSION != xno ; then
echo $ac_n "checking for g-wrap - ${min_gwrap_version} <= version < ${max_gwrap_version}""... $ac_c" 1>&6
echo "configure:10185: checking for g-wrap - ${min_gwrap_version} <= version < ${max_gwrap_version}" >&5

gwrap_major_version=`${G_WRAP_CONFIG} --version | \
	sed 's/g-wrap-config \([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
gwrap_minor_version=`${G_WRAP_CONFIG} --version | \
	sed 's/g-wrap-config \([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
gwrap_micro_version=`${G_WRAP_CONFIG} --version | \
	sed 's/g-wrap-config \([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`

major_required=`echo ${min_gwrap_version} |\
        sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
minor_required=`echo ${min_gwrap_version} |\
	sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
micro_required=`echo ${min_gwrap_version} |\
	sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`

major_prohibited=`echo ${max_gwrap_version} |\
        sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
minor_prohibited=`echo ${max_gwrap_version} |\
	sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
micro_prohibited=`echo ${max_gwrap_version} |\
	sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`


if ${GUILE} -c "(cond ((> ${gwrap_major_version} ${major_required}) (exit 0))\
	           ((< ${gwrap_major_version} ${major_required}) (exit 1))\
                   ((> ${gwrap_minor_version} ${minor_required}) (exit 0))\
		   ((< ${gwrap_minor_version} ${minor_required}) (exit 1))\
	           ((< ${gwrap_micro_version} ${micro_required}) (exit 1))\
		   (else (exit 0)))" ; then
  if ${GUILE} -c "(cond ((> ${gwrap_major_version} ${major_prohibited}) (exit 1))\
	           ((< ${gwrap_major_version} ${major_prohibited}) (exit 0))\
                   ((> ${gwrap_minor_version} ${minor_prohibited}) (exit 1))\
		   ((< ${gwrap_minor_version} ${minor_prohibited}) (exit 0))\
	           ((< ${gwrap_micro_version} ${micro_prohibited}) (exit 0))\
		   (else (exit 1)))" ; then
	version_ok=yes
  fi
fi

if test -n "$version_ok"; then
	echo "$ac_t""yes" 1>&6
	true

else
	echo "$ac_t""no" 1>&6
	echo "configure: warning: gwrap check failed" 1>&2
	{ echo "configure: error: 

  g-wrap does not appear to be installed correctly, or is not new
  enough.  Right now gnucash requires at least version 1.3.3 to build
  as there were major changes between version 1.3.1 and 1.3.2, and
  extra support added between 1.3.2 and 1.3.3 that is now required
  by gnucash.
  If you need to install g-wrap, you can find it at
  http://www.gnucash.org/pub/g-wrap.
" 1>&2; exit 1; }
fi
fi

# Find out what the g-wrap compile and link flags are.
echo $ac_n "checking for g-wrap compile args""... $ac_c" 1>&6
echo "configure:10247: checking for g-wrap compile args" >&5
G_WRAP_COMPILE_ARGS=`${G_WRAP_CONFIG} --c-compile-args guile`
echo "$ac_t""$G_WRAP_COMPILE_ARGS" 1>&6

echo $ac_n "checking for g-wrap link args""... $ac_c" 1>&6
echo "configure:10252: checking for g-wrap link args" >&5
G_WRAP_LINK_ARGS=`${G_WRAP_CONFIG} --c-link-args guile`
echo "$ac_t""$G_WRAP_LINK_ARGS" 1>&6

echo $ac_n "checking for g-wrap module directory""... $ac_c" 1>&6
echo "configure:10257: checking for g-wrap module directory" >&5
G_WRAP_MODULE_DIR=`${G_WRAP_CONFIG} --guile-module-directory`
G_WRAP_LIB_DIR=`echo $G_WRAP_MODULE_DIR | sed -e 's|share/guile|lib|'`
echo "$ac_t""$G_WRAP_MODULE_DIR" 1>&6

if test x$GUILE = x ; then
	# Extract the first word of "guile", so it can be a program name with args.
set dummy guile; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:10266: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GUILE'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GUILE" in
  /*)
  ac_cv_path_GUILE="$GUILE" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GUILE="$GUILE" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GUILE="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GUILE" && ac_cv_path_GUILE="no"
  ;;
esac
fi
GUILE="$ac_cv_path_GUILE"
if test -n "$GUILE"; then
  echo "$ac_t""$GUILE" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

 fi
  if test "${GUILE}" = "no" ; then
	{ echo "configure: error: g-wrap couldn't find guile." 1>&2; exit 1; }
 fi
 echo $ac_n "checking if g-wrap works""... $ac_c" 1>&6
echo "configure:10304: checking if g-wrap works" >&5
 $GUILE -c "(set! %load-path (cons \"$G_WRAP_MODULE_DIR\" %load-path)) (use-modules (g-wrap))"
 status=$?
 if test $status != 0 ; then
   { echo "configure: error: g-wrap could not run.  Perhaps missing slib?" 1>&2; exit 1; }
 else
   echo "$ac_t""yes" 1>&6
 fi









  GIVEN_CFLAGS=$CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  CFLAGS=$GIVEN_CFLAGS


### Check size of long_long - some guile's are broken.
echo $ac_n "checking if guile long_long is at least as big as gint64""... $ac_c" 1>&6
echo "configure:10333: checking if guile long_long is at least as big as gint64" >&5
GNC_OLDCFLAGS="$CFLAGS"
CFLAGS="${GNOME_INCLUDEDIR} ${GUILE_INCS} ${CFLAGS} ${GLIB_CFLAGS}"
if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 10340 "configure"
#include "confdefs.h"

  #include <glib.h>
  #include <libguile/__scm.h>
  int main(int argc, char *argv[]) {
    return(!(sizeof(long_long) >= sizeof(gint64)));
  }

EOF
if { (eval echo configure:10350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  
  echo "$ac_t""yes" 1>&6
  echo $ac_n "checking for scm_long_long2num in -lguile""... $ac_c" 1>&6
echo "configure:10355: checking for scm_long_long2num in -lguile" >&5
ac_lib_var=`echo guile'_'scm_long_long2num | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lguile  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 10363 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char scm_long_long2num();

int main() {
scm_long_long2num()
; return 0; }
EOF
if { (eval echo configure:10374: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define GUILE_LONG_LONG_OK 1
EOF

else
  echo "$ac_t""no" 1>&6
fi


else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  
  echo "$ac_t""no" 1>&6

fi
rm -fr conftest*
fi

CFLAGS="$GNC_OLDCFLAGS"

# One of the places this is critical is in gnc_scm_to_gint64 and inverse.
# However, I'm sure we require this elsewhere, so don't remove this test
# unless you've done sufficient code review/testing.
echo $ac_n "checking if unsigned long is at least as big as guint32""... $ac_c" 1>&6
echo "configure:10415: checking if unsigned long is at least as big as guint32" >&5
GNC_OLDCFLAGS="$CFLAGS"
CFLAGS="${GNOME_INCLUDEDIR} ${GUILE_INCS} ${CFLAGS} ${GLIB_CFLAGS}"
if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 10422 "configure"
#include "confdefs.h"

  #include <glib.h>
  int main(int argc, char *argv[]) {
    return(!(sizeof(unsigned long) >= sizeof(guint32)));
  }

EOF
if { (eval echo configure:10431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  
  echo "$ac_t""yes" 1>&6

else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  
  echo "$ac_t""no" 1>&6
  { echo "configure: error: cannot continue" 1>&2; exit 1; }

fi
rm -fr conftest*
fi

CFLAGS="$GNC_OLDCFLAGS"


### --------------------------------------------------------------------------
### Check which SRFIs we need.

GNC_ADD_ON_SRFIS=""

for f in ${srcdir}/lib/srfi/srfi-*.scm
do
  srfi=`echo $f | sed 's%.*/%%' | sed 's/.scm//'`
  echo $ac_n "checking if guile needs our copy of ${srfi}""... $ac_c" 1>&6
echo "configure:10460: checking if guile needs our copy of ${srfi}" >&5
  if ${GUILE} -c "(use-modules (srfi ${srfi}))" > /dev/null 2>&1
  then
    echo "$ac_t""no" 1>&6
  else
    GNC_ADD_ON_SRFIS="${GNC_ADD_ON_SRFIS} ${srfi}.scm"
    echo "$ac_t""yes" 1>&6
  fi
done


if test "x${GNC_ADD_ON_SRFIS}" != "x"
then
 GNC_SRFI_LOAD_PATH="\${top_srcdir}/lib/"
 GNC_TEST_SRFI_LOAD_CMD="--guile-load-dir \${top_srcdir}/lib/"
else
 GNC_SRFI_LOAD_PATH=""
 GNC_TEST_SRFI_LOAD_CMD=""
fi



### --------------------------------------------------------------------------
### See if we need guile-www

gnc_have_guile_www=no

echo $ac_n "checking if guile needs our copy of (guile www)""... $ac_c" 1>&6
echo "configure:10488: checking if guile needs our copy of (guile www)" >&5
if ${GUILE} -c "(use-modules (www main))" > /dev/null 2>&1
then
  gnc_have_guile_www=yes
  echo "$ac_t""no" 1>&6
else
  gnc_have_guile_www=no
  echo "$ac_t""yes" 1>&6
fi



if test "${gnc_have_guile_www}" = yes; then
  GNC_HAVE_GUILE_WWW_TRUE=
  GNC_HAVE_GUILE_WWW_FALSE='#'
else
  GNC_HAVE_GUILE_WWW_TRUE='#'
  GNC_HAVE_GUILE_WWW_FALSE=
fi

### --------------------------------------------------------------------------
### Gnome XML -- GNOME_XML_LIB is defined by GNOME_XML_CHECK


	
	# Extract the first word of "gnome-config", so it can be a program name with args.
set dummy gnome-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:10516: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GNOME_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GNOME_CONFIG" in
  /*)
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GNOME_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GNOME_CONFIG" && ac_cv_path_GNOME_CONFIG="no"
  ;;
esac
fi
GNOME_CONFIG="$ac_cv_path_GNOME_CONFIG"
if test -n "$GNOME_CONFIG"; then
  echo "$ac_t""$GNOME_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

	if test "$GNOME_CONFIG" = no; then
		if test xfailure = xfailure; then
			{ echo "configure: error: Could not find gnome-config" 1>&2; exit 1; }
		fi
	fi
	GNOME_XML_CFLAGS=`$GNOME_CONFIG --cflags xml`
	
	echo $ac_n "checking for xmlNewDoc in -lxml""... $ac_c" 1>&6
echo "configure:10557: checking for xmlNewDoc in -lxml" >&5
ac_lib_var=`echo xml'_'xmlNewDoc | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lxml `$GNOME_CONFIG --libs xml` $LIBS"
cat > conftest.$ac_ext <<EOF
#line 10565 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char xmlNewDoc();

int main() {
xmlNewDoc()
; return 0; }
EOF
if { (eval echo configure:10576: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
		
		GNOME_XML_LIB=`$GNOME_CONFIG --libs xml`
	
else
  echo "$ac_t""no" 1>&6

		if test xfailure = xfailure; then 
			{ echo "configure: error: Could not link sample xml program" 1>&2; exit 1; }
		fi
	
fi

	


GNOME_XML_CFLAGS=`$GNOME_CONFIG --cflags xml`

  GIVEN_CFLAGS=$GNOME_XML_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  GNOME_XML_CFLAGS=$GIVEN_CFLAGS




oLIBS="$LIBS"
LIBS="$LIBS $GNOME_XML_LIB"
echo $ac_n "checking for xmlElemDump in -lxml""... $ac_c" 1>&6
echo "configure:10624: checking for xmlElemDump in -lxml" >&5
ac_lib_var=`echo xml'_'xmlElemDump | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lxml  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 10632 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char xmlElemDump();

int main() {
xmlElemDump()
; return 0; }
EOF
if { (eval echo configure:10643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6

  { echo "configure: error: libxml 1.8.3 or newer required for GnuCash" 1>&2; exit 1; }
  
fi

LIBS="$oLIBS"


### --------------------------------------------------------------------------
### Variables
### Set up all the initial variable values...

# Check whether --enable-opt-style-install or --disable-opt-style-install was given.
if test "${enable_opt_style_install+set}" = set; then
  enableval="$enable_opt_style_install"
  case "${enableval}" in
     yes) gnc_opt_style_install=true ;;
     no)  gnc_opt_style_install=false ;;
     *) { echo "configure: error: bad value ${enableval} for --enable-opt-style-install" 1>&2; exit 1; } ;;
   esac
else
  gnc_opt_style_install=false
fi


if test x${gnc_opt_style_install} = xtrue
then
  GNC_CONFIGDIR='${sysconfdir}'
  GNC_DOC_INSTALL_DIR='${datadir}/doc'
  GNC_INCLUDE_DIR='${includedir}'
  GNC_LIBDIR='${libdir}'
  GNC_SCM_INSTALL_DIR='${datadir}/scm'
  GNC_SHAREDIR='${datadir}'
  GNC_LIBEXECDIR='${libexecdir}'
else
  GNC_CONFIGDIR='${sysconfdir}/gnucash'
  GNC_DOC_INSTALL_DIR='${pkgdatadir}/doc'
  GNC_INCLUDE_DIR='${includedir}/gnucash'
  GNC_LIBDIR='${pkglibdir}'
  GNC_SCM_INSTALL_DIR='${pkgdatadir}/scm'
  GNC_SHAREDIR='${pkgdatadir}'
  GNC_LIBEXECDIR='${libexecdir}/gnucash'
fi

GNC_ACCOUNTS_DIR='${GNC_SHAREDIR}/accounts'
GNC_GLADE_DIR='${GNC_SHAREDIR}/glade'
GNC_GWRAP_LIBDIR='${GNC_SHAREDIR}/guile-modules/g-wrapped'
GNC_MODULE_DIR='${pkglibdir}'
GNC_PIXMAP_DIR='${datadir}/pixmaps/gnucash'














# Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
  enableval="$enable_debug"
  CFLAGS="${CFLAGS} -g"
       LDFLAGS="${LDFLAGS} -g"
       cat >> confdefs.h <<\EOF
#define DEBUG_MEMORY 1
EOF

else
  cat >> confdefs.h <<\EOF
#define DEBUG_MEMORY 0
EOF
 
fi


# Check whether --enable-profile or --disable-profile was given.
if test "${enable_profile+set}" = set; then
  enableval="$enable_profile"
  CFLAGS="${CFLAGS} -pg"
       LDFLAGS="${LDFLAGS} -pg"
fi



### --------------------------------------------------------------------------
### SQL
# Check to see if the user wants to have Postgres support
#
# hack alert ... we should use 'pg_config --includedir' and
# 'pg_config --libdir' to find paths; unfortunately pg_config itself
# is hard to find :-(

# Check whether --enable-sql or --disable-sql was given.
if test "${enable_sql+set}" = set; then
  enableval="$enable_sql"
  
    PG_CONFIG=`which pg_config`

    if test "x$PG_CONFIG" = "x" ; then
        PG_CONFIG="/usr/lib/postgresql/bin/pg_config"
    fi

    if test "x$enableval" != "xno" ; then

      PGSQL_CFLAGS=`${PG_CONFIG} --includedir`
      if test "x$PGSQL_CFLAGS" != x; then
	PGSQL_CFLAGS="-I${PGSQL_CFLAGS}"
      fi

      
  GIVEN_CFLAGS=$PGSQL_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  PGSQL_CFLAGS=$GIVEN_CFLAGS


      saved_CPPFLAGS="${CPPFLAGS}"
      CPPFLAGS="${CPPFLAGS} ${PGSQL_CFLAGS}"
      for ac_hdr in pgsql/libpq-fe.h postgresql/libpq-fe.h libpq-fe.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:10792: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 10797 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:10802: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

      if test "x$ac_cv_header_pgsql_libpq_fe_h$ac_cv_header_postgresql_libpq_fe_h$ac_cv_header_libpq_fe_h" = xnonono; then
         { echo "configure: error: Cannot find PostgreSQL headers; won't build sql backend" 1>&2; exit 1; } 
      else 
        master_dirs="/usr/include /usr/local/include"
        if test "x$ac_cv_header_pgsql_libpq_fe_h" != xno; then
          for dir in $master_dirs; do
              if test -f "$dir/pgsql/libpq-fe.h"; then
                  CFLAGS="${CFLAGS} -I$dir/pgsql"
                  break
	      fi
          done
        elif test "x$ac_cv_header_postgresql_libpq_fe_h" != xno; then
          for dir in $master_dirs; do
              if test -f "$dir/postgresql/libpq-fe.h"; then
                  CFLAGS="${CFLAGS} -I$dir/postgresql"
                  break
              fi
          done
	fi

	
  GIVEN_CFLAGS=$CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  CFLAGS=$GIVEN_CFLAGS

        
        PGSQL_LIBS=`${PG_CONFIG} --libdir`
        if test "x$PGSQL_LIBS" != x; then
	  PGSQL_LIBS="-L${PGSQL_LIBS}"
        fi

        saved_LIBS="$LIBS"
 	LIBS="${PGSQL_LIBS} -lpq $LIBS"
        echo $ac_n "checking for libpq""... $ac_c" 1>&6
echo "configure:10867: checking for libpq" >&5
        cat > conftest.$ac_ext <<EOF
#line 10869 "configure"
#include "confdefs.h"

	    #include <libpq-fe.h>
	  
int main() {

             PQconnectdb("asdf");
          
; return 0; }
EOF
if { (eval echo configure:10880: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  
            echo "$ac_t""yes" 1>&6
            SQL_DIR=postgres
          
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  
            { echo "configure: error: Cannot find PostgreSQL libraries; will not build sql backend" 1>&2; exit 1; } 
          
        
fi
rm -f conftest*
        LIBS="$saved_LIBS"
      fi
      CPPFLAGS="$saved_CPPFLAGS"
    fi
  

fi







### --------------------------------------------------------------------------
### RPC
# Check whether --enable-rpc or --disable-rpc was given.
if test "${enable_rpc+set}" = set; then
  enableval="$enable_rpc"
  
       echo "configure: warning: 

       The RPC Backend is depricated.  You should not use it.
       It may go away in the future.  If you need it, please
       contact gnucash-devel@gnucash.org and let the developers
       know.
       " 1>&2
       RPC_DIR=rpc
  
fi




### --------------------------------------------------------------------------
### OFX
# Check whether --enable-ofx or --disable-ofx was given.
if test "${enable_ofx+set}" = set; then
  enableval="$enable_ofx"
  if test "x$enableval" != "xno" ; then
    OFX_DIR=ofx
  fi
fi

if test x${OFX_DIR} = xofx ;
then
    # Check whether --with-ofx-prefix or --without-ofx-prefix was given.
if test "${with_ofx_prefix+set}" = set; then
  withval="$with_ofx_prefix"
  OFXPREFIX="$with_ofx_prefix" 
fi


    if test x${OFXPREFIX} != x ; then
    	LIBOFX_LIBS="-L${OFXPREFIX}/lib"
	LIBOFX_CFLAGS="-I${OFXPREFIX}/include"
    fi

    echo $ac_n "checking for libofx/libofx.h""... $ac_c" 1>&6
echo "configure:10955: checking for libofx/libofx.h" >&5
    
  GIVEN_CFLAGS=$LIBOFX_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  LIBOFX_CFLAGS=$GIVEN_CFLAGS

    save_CPPFLAGS="${CPPFLAGS}"
    CPPFLAGS="${CPPFLAGS} ${LIBOFX_CFLAGS}"
    cat > conftest.$ac_ext <<EOF
#line 10969 "configure"
#include "confdefs.h"
#include <libofx/libofx.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:10974: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  OFXfound=no 
fi
rm -f conftest*

    if test x${OFXPREFIX} = x -a x${OFXfound} = no ; then
    	LIBOFX_LIBS="-L$/usr/local/lib"
	LIBOFX_CFLAGS="-I$/usr/local/include"
        
  GIVEN_CFLAGS=$LIBOFX_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  LIBOFX_CFLAGS=$GIVEN_CFLAGS

        CPPFLAGS="${CPPFLAGS} ${LIBOFX_CFLAGS}"

        cat > conftest.$ac_ext <<EOF
#line 11004 "configure"
#include "confdefs.h"
#include <libofx/libofx.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:11009: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  echo "$ac_t""yes (in /usr/local)" 1>&6
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   { echo "configure: error: cannot find libofx header, needed for OFX support." 1>&2; exit 1; }  
fi
rm -f conftest*
    fi

    LIBOFX_LIBS="${LIBOFX_LIBS} -lofx -lstdc++"
    echo $ac_n "checking for libofx""... $ac_c" 1>&6
echo "configure:11026: checking for libofx" >&5
    save_LIBS="${LIBS}"
    LIBS="${LIBS} ${LIBOFX_LIBS}"
    cat > conftest.$ac_ext <<EOF
#line 11030 "configure"
#include "confdefs.h"

#include <libofx/libofx.h>
int ofx_proc_status_cb(const struct OfxStatusData data) { return 0; }
int ofx_proc_account_cb(const struct OfxAccountData data) { return 0; }
int ofx_proc_security_cb(const struct OfxSecurityData data) { return 0; }
int ofx_proc_transaction_cb(const struct OfxTransactionData data) { return 0; }
int ofx_proc_statement_cb(const struct OfxStatementData data) { return 0; }
	
int main() {

	ofx_proc_file(0, NULL);
	
; return 0; }
EOF
if { (eval echo configure:11046: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  echo "$ac_t""yes" 1>&6
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   { echo "configure: error: *** Cannot compile test program for libofx library. Please check config.log for the exact error." 1>&2; exit 1; }  
fi
rm -f conftest*

    LIBS="${save_LIBS}"
    CPPFLAGS="${save_CPPFLAGS}"
    
    
fi


### --------------------------------------------------------------------------
### HBCI
# Check whether --enable-hbci or --disable-hbci was given.
if test "${enable_hbci+set}" = set; then
  enableval="$enable_hbci"
  if test "x$enableval" != "xno" ; then
    HBCI_DIR=hbci
  fi
fi

if test x${HBCI_DIR} = xhbci ;
then
    
echo $ac_n "checking for OpenHBCI""... $ac_c" 1>&6
echo "configure:11078: checking for OpenHBCI" >&5
# Check whether --enable-openhbcitest or --disable-openhbcitest was given.
if test "${enable_openhbcitest+set}" = set; then
  enableval="$enable_openhbcitest"
  :
else
  enable_openhbcitest=yes
fi


# Check whether --with-openhbci-prefix or --without-openhbci-prefix was given.
if test "${with_openhbci_prefix+set}" = set; then
  withval="$with_openhbci_prefix"
  OPENHBCI_PREFIX="$with_openhbci_prefix"
else
  OPENHBCI_PREFIX="${prefix} \
		/usr/local \
		/usr/local/openhbci \
		/usr"
fi


hbci_config=""
for li in $OPENHBCI_PREFIX; do
  if test -x "${li}/bin/openhbci-config"; then
    hbci_config="${li}/bin/openhbci-config"
    hbci_dir="${li}"
    break
  fi
done

if test -x "${hbci_config}" ; then
  OPENHBCI_LIBS="`${hbci_config} --libraries`"
  OPENHBCI_CFLAGS="`${hbci_config} --includes`"
  OPENHBCI_CXXFLAGS="`${hbci_config} --includes`"
else
  { echo "configure: error: 
  Could not find bin/openhbci-config in prefix ${OPENHBCI_PREFIX}.
  Please specify the right path by --with-openhbci-prefix=PREFIX.
  " 1>&2; exit 1; }
fi  
echo "$ac_t""$hbci_dir" 1>&6

min_openhbci_version=0.9.6
echo $ac_n "checking for OpenHBCI - version >= $min_openhbci_version""... $ac_c" 1>&6
echo "configure:11123: checking for OpenHBCI - version >= $min_openhbci_version" >&5

if test "x$enable_openhbcitest" = "xyes" ; then
  ac_save_CFLAGS="$CFLAGS"
  ac_save_LIBS="$LIBS"
  CFLAGS="$CFLAGS $OPENHBCI_CFLAGS"
  LIBS="$OPENHBCI_LIBS $LIBS"
  rm -f conf.openhbcitest
  if test "$cross_compiling" = yes; then
  echo $ac_n "cross compiling; assumed OK... $ac_c"
else
  cat > conftest.$ac_ext <<EOF
#line 11135 "configure"
#include "confdefs.h"

#include <openhbci.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>

#ifndef OPENHBCI_VERSION_BUILD
#  define OPENHBCI_VERSION_BUILD 0
#endif
int 
main ()
{
  int major, minor, micro, build;
  int getmajor, getminor, getmicro, getbuild;
  char *tmp_version;

  system ("touch conf.openhbcitest");

  /* HP/UX 9 writes to sscanf strings */
  tmp_version = strdup("$min_openhbci_version");
  build=0;
  if (sscanf(tmp_version, "%d.%d.%d.%d", &major, &minor, &micro, &build) != 4)
  {
    build = 0;
    if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3)
    {
      micro = 0;
      if (sscanf(tmp_version, "%d.%d", &major, &minor) != 2)
      {
        minor = 0;
        if (sscanf(tmp_version, "%d", &major) != 1)
        {
          printf("\n*** AM PATH OPENHBCI: bad version string: %s\n", "$min_openhbci_version");
          exit(1);
        }
      }
    }
  }

#if ((OPENHBCI_VERSION_MAJOR>0) || (OPENHBCI_VERSION_MINOR>9) || \
      (OPENHBCI_VERSION_PATCHLEVEL>9) || (OPENHBCI_VERSION_BUILD>17))
  /* Four-argument libraryVersion_build() was introduced with 0.9.9.18. */
  HBCI_Hbci_libraryVersion_build(&getmajor, &getminor, &getmicro, &getbuild);
#elif ((OPENHBCI_VERSION_MAJOR>0) || (OPENHBCI_VERSION_MINOR>9) || \
      (OPENHBCI_VERSION_PATCHLEVEL>9) || (OPENHBCI_VERSION_BUILD>8))
  /* Four-argument libraryVersion() was introduced with 0.9.9.9. */
  HBCI_Hbci_libraryVersion(&getmajor, &getminor, &getmicro, &getbuild);
#else
  HBCI_Hbci_libraryVersion(&getmajor, &getminor, &getmicro);
  getbuild = OPENHBCI_VERSION_BUILD;
#endif

  if ((getmajor != OPENHBCI_VERSION_MAJOR) ||
      (getminor != OPENHBCI_VERSION_MINOR) ||
      (getmicro != OPENHBCI_VERSION_PATCHLEVEL) ||
      (getbuild != OPENHBCI_VERSION_BUILD))
    {
      printf("\n*** OpenHBCI header files openhbci.h "
	     "(version %d.%d.%d build %d) do not match\n",
	     OPENHBCI_VERSION_MAJOR, 
	     OPENHBCI_VERSION_MINOR, 
	     OPENHBCI_VERSION_PATCHLEVEL,
	     OPENHBCI_VERSION_BUILD);
      printf("*** installed library libopenhbci.so "
	     "(version %d.%d.%d build %d)\n",
	     getmajor, getminor, getmicro, getbuild);
      exit(1);
    }
  else
    {
      if ((getmajor > major) ||
	  ((getmajor == major) && (getminor > minor)) ||
	  ((getmajor == major) && (getminor == minor) && (getmicro > micro)) ||
	  ((getmajor == major) && (getminor == minor) && 
	   (getmicro == micro) && (getbuild >= build)))
	{
	  return 0;
	}
      else
	{
	  printf("\n*** An old version of OpenHBCI (%d.%d.%d build %d) was found.\n",
		 getmajor, getminor, getmicro, getbuild);
	  printf("*** You need OpenHBCI in version %d.%d.%d build %d or newer. The latest\n",
		 major, minor, micro, build);
	  printf("*** version of OpenHBCI is always available from http://www.openhbci.de.\n");
	  if (build > 0)
	    printf("*** Note: The non-zero build number '%d' indicates that the latest CVS \n"
		   "*** version of openhbci is required.\n", build);
	  printf("***\n"
	"*** If you have already installed a sufficiently new version, this error\n"
	"*** probably means that you need to specify the right path by\n"
	"*** --with-openhbci-prefix=PATH.  (Also, check that your LD_LIBRARY_PATH\n"
	"*** enviroment variable is correct, or edit /etc/ld.so.conf\n"
	"*** so that the correct libraries are found at run-time)\n");
	}
    }
  return 1;
}

EOF
if { (eval echo configure:11237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_openhbci=yes
fi
rm -fr conftest*
fi

  CFLAGS="$ac_save_CFLAGS"
  LIBS="$ac_save_LIBS"
fi
if test "x$no_openhbci" = x ; then
  echo "$ac_t""yes" 1>&6
  :     
else
  echo "$ac_t""no" 1>&6
  if test -f conf.openhbcitest ; then
    :
  else
    echo "*** Could not run OpenHBCI test program, checking why..."
    ac_save_CFLAGS="$CFLAGS"
    ac_save_LIBS="$LIBS"
    CFLAGS="$CFLAGS $OPENHBCI_CFLAGS"
    LIBS="$LIBS $OPENHBCI_LIBS"
    cat > conftest.$ac_ext <<EOF
#line 11266 "configure"
#include "confdefs.h"

#include <openhbci.h>
#include <stdio.h>

int main() {
 return ((OPENHBCI_VERSION_MAJOR) || (OPENHBCI_VERSION_MINOR)); 
; return 0; }
EOF
if { (eval echo configure:11276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "***"
	  echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding OpenHBCI or finding the wrong"
          echo "*** version of OpenHBCI. If it is not finding OpenHBCI, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system."
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH." 
	  echo "***" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "***"
	  echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means OpenHBCI is incorrectly installed."
fi
rm -f conftest*
    CFLAGS="$ac_save_CFLAGS"
    LIBS="$ac_save_LIBS"
  fi
  OPENHBCI_CFLAGS=""
  OPENHBCI_LIBS=""
  :
  exit 1;
fi



rm -f conf.openhbcitest

    HBCI_LIBS="${OPENHBCI_LIBS}"
    HBCI_CFLAGS="${OPENHBCI_CFLAGS}"

    
  GIVEN_CFLAGS=$HBCI_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  HBCI_CFLAGS=$GIVEN_CFLAGS

    
    
fi

### --------------------------------------------------------------------------
### i18n

# Check whether --with-locale-dir or --without-locale-dir was given.
if test "${with_locale_dir+set}" = set; then
  withval="$with_locale_dir"
  LOCALE_DIR="$with_locale_dir"
else
  LOCALE_DIR="\${prefix}/share/locale"
fi





  echo $ac_n "checking for nl_langinfo and D_FMT""... $ac_c" 1>&6
echo "configure:11344: checking for nl_langinfo and D_FMT" >&5
if eval "test \"`echo '$''{'am_cv_langinfo_dfmt'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11349 "configure"
#include "confdefs.h"
#include <langinfo.h>
int main() {
char* cs = nl_langinfo(D_FMT);
; return 0; }
EOF
if { (eval echo configure:11356: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  am_cv_langinfo_dfmt=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  am_cv_langinfo_dfmt=no
fi
rm -f conftest*
    
fi

echo "$ac_t""$am_cv_langinfo_dfmt" 1>&6
  if test $am_cv_langinfo_dfmt = yes; then
    cat >> confdefs.h <<\EOF
#define HAVE_LANGINFO_D_FMT 1
EOF

  fi


### --------------------------------------------------------------------------
### help files

# Used to initialize doc-path.
# Check whether --with-help-prefix or --without-help-prefix was given.
if test "${with_help_prefix+set}" = set; then
  withval="$with_help_prefix"
  GNC_HELPDIR="$with_help_prefix/gnome/help/gnucash"
else
  GNC_HELPDIR="\${datadir}/gnome/help/gnucash"
fi





### --------------------------------------------------------------------------
### Check for etags

# Check whether --enable-etags or --disable-etags was given.
if test "${enable_etags+set}" = set; then
  enableval="$enable_etags"
  if test $enableval = yes; then
     USE_ETAGS=1
  fi
else
  USE_ETAGS=0
fi


if test ${USE_ETAGS} = 1; then
  # Extract the first word of "etags", so it can be a program name with args.
set dummy etags; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:11412: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNC_ETAGS_FILE'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$GNC_ETAGS_FILE"; then
  ac_cv_prog_GNC_ETAGS_FILE="$GNC_ETAGS_FILE" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_GNC_ETAGS_FILE="TAGS"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
GNC_ETAGS_FILE="$ac_cv_prog_GNC_ETAGS_FILE"
if test -n "$GNC_ETAGS_FILE"; then
  echo "$ac_t""$GNC_ETAGS_FILE" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

fi



if test x${GNC_ETAGS_FILE} = xTAGS; then
  GNC_ETAGS_FILE_TRUE=
  GNC_ETAGS_FILE_FALSE='#'
else
  GNC_ETAGS_FILE_TRUE='#'
  GNC_ETAGS_FILE_FALSE=
fi

### --------------------------------------------------------------------------
### Check for ctags

# Check whether --enable-ctags or --disable-ctags was given.
if test "${enable_ctags+set}" = set; then
  enableval="$enable_ctags"
  if test $enableval = yes; then
     USE_CTAGS=1
  fi
else
  USE_CTAGS=0
fi


if test ${USE_CTAGS} = 1; then
  # Extract the first word of "ctags", so it can be a program name with args.
set dummy ctags; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:11468: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNC_CTAGS_FILE'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$GNC_CTAGS_FILE"; then
  ac_cv_prog_GNC_CTAGS_FILE="$GNC_CTAGS_FILE" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_GNC_CTAGS_FILE="tags"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
GNC_CTAGS_FILE="$ac_cv_prog_GNC_CTAGS_FILE"
if test -n "$GNC_CTAGS_FILE"; then
  echo "$ac_t""$GNC_CTAGS_FILE" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

fi



if test x${GNC_CTAGS_FILE} = xtags; then
  GNC_CTAGS_FILE_TRUE=
  GNC_CTAGS_FILE_FALSE='#'
else
  GNC_CTAGS_FILE_TRUE='#'
  GNC_CTAGS_FILE_FALSE=
fi

### --------------------------------------------------------------------------
### Check for perl

# Check for perl, force version 5
# Check whether --with-perl or --without-perl was given.
if test "${with_perl+set}" = set; then
  withval="$with_perl"
  PERL="${with_perl}"
fi


# If the user didn't specify a perl, then go fetch.
if test x"$PERL" = x;
then
  # Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:11523: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$PERL" in
  /*)
  ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_PERL="$PERL" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_PERL="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
PERL="$ac_cv_path_PERL"
if test -n "$PERL"; then
  echo "$ac_t""$PERL" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

fi

# Make sure Perl was found
if test x"$PERL" = x; then
    { echo "configure: error: Cannot find Perl. Try using the --with-perl flag." 1>&2; exit 1; }
fi

# Make sure it's version 5 or later
if "$PERL" -e 'exit 1 if $] < 5.0'; then
	:
else
    { echo "configure: error: Found ${PERL} reports version 
                 `${PERL} -e 'print $'`" 1>&2; exit 1; }
fi


# Now check for perl headers
# This appears to be what Perl's ExtUtils::MakeMaker module does, so
# I'm reasonably sure it's correct.
# PERLINCL="/usr/lib/perl5/i386-linux/5.00404"
#
PERLINCL=`$PERL -MConfig -e 'print $Config{"archlibexp"}'`
# Check whether --with-perl-includes or --without-perl-includes was given.
if test "${with_perl_includes+set}" = set; then
  withval="$with_perl_includes"
  PERLINCL="$with_perl_includes" 
fi



# check for doxygen, mostly stolen from http://log4cpp.sourceforge.net/
# ----------------------------------------------------------------------------


# check for doxygen
# ----------------------------------------------------------------------------

# Check whether --enable-doxygen or --disable-doxygen was given.
if test "${enable_doxygen+set}" = set; then
  enableval="$enable_doxygen"
  :
fi

# Check whether --enable-dot or --disable-dot was given.
if test "${enable_dot+set}" = set; then
  enableval="$enable_dot"
  :
fi
              
# Check whether --enable-html-docs or --disable-html-docs was given.
if test "${enable_html_docs+set}" = set; then
  enableval="$enable_html_docs"
  :
else
   enable_html_docs=yes
fi
              
# Check whether --enable-latex-docs or --disable-latex-docs was given.
if test "${enable_latex_docs+set}" = set; then
  enableval="$enable_latex_docs"
  :
else
   enable_latex_docs=no
fi
              
if test "x$enable_doxygen" = xno; then
        enable_doc=no
else 
        # Extract the first word of "doxygen", so it can be a program name with args.
set dummy doxygen; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:11626: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DOXYGEN'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$DOXYGEN" in
  /*)
  ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_DOXYGEN="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
DOXYGEN="$ac_cv_path_DOXYGEN"
if test -n "$DOXYGEN"; then
  echo "$ac_t""$DOXYGEN" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

        if test x$DOXYGEN = x; then
                if test "x$enable_doxygen" = xyes; then
                        { echo "configure: error: could not find doxygen" 1>&2; exit 1; }
                fi
                enable_doc=no
        else
                enable_doc=yes
                # Extract the first word of "dot", so it can be a program name with args.
set dummy dot; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:11668: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DOT'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$DOT" in
  /*)
  ac_cv_path_DOT="$DOT" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_DOT="$DOT" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_DOT="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
DOT="$ac_cv_path_DOT"
if test -n "$DOT"; then
  echo "$ac_t""$DOT" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

        fi
fi


if test x$enable_doc = xyes; then
  DOC_TRUE=
  DOC_FALSE='#'
else
  DOC_TRUE='#'
  DOC_FALSE=
fi

if test x$DOT = x; then
        if test "x$enable_dot" = xyes; then
                { echo "configure: error: could not find dot" 1>&2; exit 1; }
        fi
        enable_dot=no
else
        enable_dot=yes
fi


if test x$enable_doc = xtrue; then
  ENABLE_DOXYGEN_TRUE=
  ENABLE_DOXYGEN_FALSE='#'
else
  ENABLE_DOXYGEN_TRUE='#'
  ENABLE_DOXYGEN_FALSE=
fi






### --------------------------------------------------------------------------
### Libraries
LIBS="$LIBS -lm"


### --------------------------------------------------------------------------
### Berkeley db

# Check whether --enable-prefer-db1 or --disable-prefer-db1 was given.
if test "${enable_prefer_db1+set}" = set; then
  enableval="$enable_prefer_db1"
  prefer_db1="$enableval"
else
  prefer_db1=yes
fi


DB_LIBS=
echo $ac_n "checking for dbopen""... $ac_c" 1>&6
echo "configure:11754: checking for dbopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dbopen'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 11759 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char dbopen(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dbopen();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_dbopen) || defined (__stub___dbopen)
choke me
#else
dbopen();
#endif

; return 0; }
EOF
if { (eval echo configure:11782: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_dbopen=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_dbopen=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'dbopen`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
if test "$prefer_db1" = "yes"; then
 echo $ac_n "checking for dbopen in -ldb1""... $ac_c" 1>&6
echo "configure:11801: checking for dbopen in -ldb1" >&5
ac_lib_var=`echo db1'_'dbopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldb1  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 11809 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dbopen();

int main() {
dbopen()
; return 0; }
EOF
if { (eval echo configure:11820: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  DB_LIBS="-ldb1"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbopen in -ldb""... $ac_c" 1>&6
echo "configure:11839: checking for dbopen in -ldb" >&5
ac_lib_var=`echo db'_'dbopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldb  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 11847 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dbopen();

int main() {
dbopen()
; return 0; }
EOF
if { (eval echo configure:11858: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  DB_LIBS="-ldb"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for __db185_open in -ldb-3""... $ac_c" 1>&6
echo "configure:11877: checking for __db185_open in -ldb-3" >&5
ac_lib_var=`echo db-3'_'__db185_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldb-3  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 11885 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char __db185_open();

int main() {
__db185_open()
; return 0; }
EOF
if { (eval echo configure:11896: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  DB_LIBS="-ldb-3"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for __db185_open in -ldb-4.0""... $ac_c" 1>&6
echo "configure:11915: checking for __db185_open in -ldb-4.0" >&5
ac_lib_var=`echo db-4.0'_'__db185_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldb-4.0  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 11923 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char __db185_open();

int main() {
__db185_open()
; return 0; }
EOF
if { (eval echo configure:11934: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  DB_LIBS="-ldb-4.0"
else
  echo "$ac_t""no" 1>&6
{ echo "configure: error: Your db library is missing db 1.85 compatibility mode" 1>&2; exit 1; }
    
fi

   
fi

  
fi

 
fi

else
 echo $ac_n "checking for dbopen in -ldb""... $ac_c" 1>&6
echo "configure:11967: checking for dbopen in -ldb" >&5
ac_lib_var=`echo db'_'dbopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldb  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 11975 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dbopen();

int main() {
dbopen()
; return 0; }
EOF
if { (eval echo configure:11986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  DB_LIBS="-ldb"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbopen in -ldb1""... $ac_c" 1>&6
echo "configure:12005: checking for dbopen in -ldb1" >&5
ac_lib_var=`echo db1'_'dbopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldb1  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12013 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dbopen();

int main() {
dbopen()
; return 0; }
EOF
if { (eval echo configure:12024: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  DB_LIBS="-ldb1"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for __db185_open in -ldb-3""... $ac_c" 1>&6
echo "configure:12043: checking for __db185_open in -ldb-3" >&5
ac_lib_var=`echo db-3'_'__db185_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldb-3  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12051 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char __db185_open();

int main() {
__db185_open()
; return 0; }
EOF
if { (eval echo configure:12062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  DB_LIBS="-ldb-3"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for __db185_open in -ldb-4.0""... $ac_c" 1>&6
echo "configure:12081: checking for __db185_open in -ldb-4.0" >&5
ac_lib_var=`echo db-4.0'_'__db185_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldb-4.0  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12089 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char __db185_open();

int main() {
__db185_open()
; return 0; }
EOF
if { (eval echo configure:12100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  DB_LIBS="-ldb-4.0"
else
  echo "$ac_t""no" 1>&6
{ echo "configure: error: Your db library is missing db 1.85 compatibility mode" 1>&2; exit 1; }
    
fi

   
fi

  
fi

 
fi

fi

fi


if test "$prefer_db1" = "yes"; then
	for ac_hdr in db_185.h db1/db.h db4/db_185.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:12141: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 12146 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:12151: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

	if test "$ac_cv_header_db_185_h$ac_cv_header_db1_db_h$ac_cv_header_db4_db_185_h" = nonono; then
	  { echo "configure: error: Berkeley db library required for GnuCash" 1>&2; exit 1; }
	fi
	cat >> confdefs.h <<\EOF
#define PREFER_DB1 1
EOF

else
	for ac_hdr in db.h db_185.h db1/db.h db4/db_185.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:12189: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 12194 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:12199: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


	if test "$ac_cv_header_db_h$ac_cv_header_db_185_h$ac_cv_header_db1_db_h$ac_cv_header_db4_db_185_h" = nononono; then
	  { echo "configure: error: Berkeley db library required for GnuCash" 1>&2; exit 1; }
	fi
fi



### --------------------------------------------------------------------------
### popt

echo $ac_n "checking for poptStrippedArgv in -lpopt""... $ac_c" 1>&6
echo "configure:12237: checking for poptStrippedArgv in -lpopt" >&5
ac_lib_var=`echo popt'_'poptStrippedArgv | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lpopt  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 12245 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char poptStrippedArgv();

int main() {
poptStrippedArgv()
; return 0; }
EOF
if { (eval echo configure:12256: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_lib=HAVE_LIB`echo popt | sed -e 's/[^a-zA-Z0-9_]/_/g' \
    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
  cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF

  LIBS="-lpopt $LIBS"

else
  echo "$ac_t""no" 1>&6
{ echo "configure: error: 

  popt 1.5 or newer is required to build gnucash. You can download
  the latest version from ftp://people.redhat.com/sopwith/popt/, or if
  you're running Debian, install the libpopt-dev package.
" 1>&2; exit 1; }
fi



### --------------------------------------------------------------------------
### GNOME gui components -- built by default, but not if --enable-gui=no
### or --disable-gui is passed to autogen 
### --------------------------------------------------------------------------

# Check whether --enable-gui or --disable-gui was given.
if test "${enable_gui+set}" = set; then
  enableval="$enable_gui"
  case "${enableval}" in
     yes) gnc_build_gui=true ;;
     no)  gnc_build_gui=false ;;
     *) gnc_build_gui=true ;;
   esac
else
  gnc_build_gui=true
fi




if test x${gnc_build_gui} = xtrue; then
  GNUCASH_ENABLE_GUI_TRUE=
  GNUCASH_ENABLE_GUI_FALSE='#'
else
  GNUCASH_ENABLE_GUI_TRUE='#'
  GNUCASH_ENABLE_GUI_FALSE=
fi

if test x${gnc_build_gui} = xtrue ;
then
    
	
	
	
	
	
	
	
	

	# Check whether --with-gnome-includes or --without-gnome-includes was given.
if test "${with_gnome_includes+set}" = set; then
  withval="$with_gnome_includes"
  
	CPPFLAGS="$CPPFLAGS -I$withval"
	
fi

	
	# Check whether --with-gnome-libs or --without-gnome-libs was given.
if test "${with_gnome_libs+set}" = set; then
  withval="$with_gnome_libs"
  
	LDFLAGS="$LDFLAGS -L$withval"
	gnome_prefix=$withval
	
fi


	# Check whether --with-gnome or --without-gnome was given.
if test "${with_gnome+set}" = set; then
  withval="$with_gnome"
  if test x$withval = xyes; then
	    		want_gnome=yes
	    						    		:
        	else
	    		if test "x$withval" = xno; then
	        		want_gnome=no
	    		else
	        		want_gnome=yes
	    			LDFLAGS="$LDFLAGS -L$withval/lib"
	    			CPPFLAGS="$CPPFLAGS -I$withval/include"
	    			gnome_prefix=$withval/lib
	    		fi
  		fi
else
  want_gnome=yes
fi


	if test "x$want_gnome" = xyes; then

	    # Extract the first word of "gnome-config", so it can be a program name with args.
set dummy gnome-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:12376: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GNOME_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GNOME_CONFIG" in
  /*)
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GNOME_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GNOME_CONFIG" && ac_cv_path_GNOME_CONFIG="no"
  ;;
esac
fi
GNOME_CONFIG="$ac_cv_path_GNOME_CONFIG"
if test -n "$GNOME_CONFIG"; then
  echo "$ac_t""$GNOME_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

	    if test "$GNOME_CONFIG" = "no"; then
	      no_gnome_config="yes"
	    else
	      echo $ac_n "checking if $GNOME_CONFIG works""... $ac_c" 1>&6
echo "configure:12413: checking if $GNOME_CONFIG works" >&5
	      if $GNOME_CONFIG --libs-only-l gnome >/dev/null 2>&1; then
	        echo "$ac_t""yes" 1>&6
	        
	
	# Extract the first word of "orbit-config", so it can be a program name with args.
set dummy orbit-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:12421: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_ORBIT_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$ORBIT_CONFIG" in
  /*)
  ac_cv_path_ORBIT_CONFIG="$ORBIT_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_ORBIT_CONFIG="$ORBIT_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_ORBIT_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_ORBIT_CONFIG" && ac_cv_path_ORBIT_CONFIG="no"
  ;;
esac
fi
ORBIT_CONFIG="$ac_cv_path_ORBIT_CONFIG"
if test -n "$ORBIT_CONFIG"; then
  echo "$ac_t""$ORBIT_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

	# Extract the first word of "orbit-idl", so it can be a program name with args.
set dummy orbit-idl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:12457: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_ORBIT_IDL'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$ORBIT_IDL" in
  /*)
  ac_cv_path_ORBIT_IDL="$ORBIT_IDL" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_ORBIT_IDL="$ORBIT_IDL" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_ORBIT_IDL="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_ORBIT_IDL" && ac_cv_path_ORBIT_IDL="no"
  ;;
esac
fi
ORBIT_IDL="$ac_cv_path_ORBIT_IDL"
if test -n "$ORBIT_IDL"; then
  echo "$ac_t""$ORBIT_IDL" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

	echo $ac_n "checking for working ORBit environment""... $ac_c" 1>&6
echo "configure:12491: checking for working ORBit environment" >&5
if eval "test \"`echo '$''{'gnome_cv_orbit_found'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
		if test x$ORBIT_CONFIG = xno -o x$ORBIT_IDL = xno; then
			gnome_cv_orbit_found=no
		else
			gnome_cv_orbit_found=yes
		fi
	
fi

echo "$ac_t""$gnome_cv_orbit_found" 1>&6
	

if test x$gnome_cv_orbit_found = xyes; then
  HAVE_ORBIT_TRUE=
  HAVE_ORBIT_FALSE='#'
else
  HAVE_ORBIT_TRUE='#'
  HAVE_ORBIT_FALSE=
fi
	if test x$gnome_cv_orbit_found = xyes; then
		
		ORBIT_CFLAGS=`orbit-config --cflags client server`
		ORBIT_LIBS=`orbit-config --use-service=name --libs client server`
		
		
	else
    		if test xfail = xfailure; then
			{ echo "configure: error: ORBit not installed or installation problem" 1>&2; exit 1; }
    		fi
	fi

	echo $ac_n "checking for gnorba libraries""... $ac_c" 1>&6
echo "configure:12527: checking for gnorba libraries" >&5
if eval "test \"`echo '$''{'gnome_cv_gnorba_found'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
		gnome_cv_gnorba_found=no
		if test x$gnome_cv_orbit_found = xyes; then
			GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
			GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
			if test -n "$GNORBA_LIBS"; then
				gnome_cv_gnorba_found=yes
			fi
		fi
	
fi

echo "$ac_t""$gnome_cv_gnorba_found" 1>&6
	

if test x$gnome_cv_gnorba_found = xyes; then
  HAVE_GNORBA_TRUE=
  HAVE_GNORBA_FALSE='#'
else
  HAVE_GNORBA_TRUE='#'
  HAVE_GNORBA_FALSE=
fi
	if test x$gnome_cv_orbit_found = xyes; then
		
		GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
		GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
		
		
	else
	    	if test xfail = xfailure; then
			{ echo "configure: error: gnorba library not installed or installation problem" 1>&2; exit 1; }
	    	fi
	fi

	        GNOME_LIBS="`$GNOME_CONFIG --libs-only-l gnome`"
	        GNOMEUI_LIBS="`$GNOME_CONFIG --libs-only-l gnomeui`"
	        GNOMEGNORBA_LIBS="`$GNOME_CONFIG --libs-only-l gnorba gnomeui`"
	        GTKXMHTML_LIBS="`$GNOME_CONFIG --libs-only-l gtkxmhtml`"
		ZVT_LIBS="`$GNOME_CONFIG --libs-only-l zvt`"
	        GNOME_LIBDIR="`$GNOME_CONFIG --libs-only-L gtk gnorba gnomeui`"
	        GNOME_INCLUDEDIR="`$GNOME_CONFIG --cflags gtk gnorba gnomeui`"
                
	      else
	        echo "$ac_t""no" 1>&6
	        no_gnome_config="yes"
              fi
            fi

	    if test x$exec_prefix = xNONE; then
	        if test x$prefix = xNONE; then
		    gnome_prefix=$ac_default_prefix/lib
	        else
 		    gnome_prefix=$prefix/lib
	        fi
	    else
	        gnome_prefix=`eval echo \`echo $libdir\``
	    fi
	
	    if test "$no_gnome_config" = "yes"; then
              echo $ac_n "checking for gnomeConf.sh file in $gnome_prefix""... $ac_c" 1>&6
echo "configure:12591: checking for gnomeConf.sh file in $gnome_prefix" >&5
	      if test -f $gnome_prefix/gnomeConf.sh; then
	        echo "$ac_t""found" 1>&6
	        echo "loading gnome configuration from" \
		     "$gnome_prefix/gnomeConf.sh"
	        . $gnome_prefix/gnomeConf.sh
	        
	      else
	        echo "$ac_t""not found" 1>&6
 	        if test xfail = xfail; then
	          { echo "configure: error: Could not find the gnomeConf.sh file that is generated by gnome-libs install" 1>&2; exit 1; }
 	        fi
	      fi
            fi
	fi

	if test -n ""; then
	  n=""
	  for i in $n; do
	    echo $ac_n "checking extra library \"$i\"""... $ac_c" 1>&6
echo "configure:12611: checking extra library \"$i\"" >&5
	    case $i in 
	      applets)
		
		GNOME_APPLETS_LIBS=`$GNOME_CONFIG --libs-only-l applets`
		echo "$ac_t""$GNOME_APPLETS_LIBS" 1>&6;;
	      docklets)
		
		GNOME_DOCKLETS_LIBS=`$GNOME_CONFIG --libs-only-l docklets`
		echo "$ac_t""$GNOME_DOCKLETS_LIBS" 1>&6;;
	      capplet)
		
		GNOME_CAPPLET_LIBS=`$GNOME_CONFIG --libs-only-l capplet`
		echo "$ac_t""$GNOME_CAPPLET_LIBS" 1>&6;;
	      *)
		echo "$ac_t""unknown library" 1>&6
	    esac
	  done
	fi


    
  # Check whether --enable-compile-warnings or --disable-compile-warnings was given.
if test "${enable_compile_warnings+set}" = set; then
  enableval="$enable_compile_warnings"
  :
else
  enable_compile_warnings=minimum
fi


  echo $ac_n "checking what warning flags to pass to the C compiler""... $ac_c" 1>&6
echo "configure:12643: checking what warning flags to pass to the C compiler" >&5
  warnCFLAGS=
  if test "x$GCC" != xyes; then
    enable_compile_warnings=no
  fi

  if test "x$enable_compile_warnings" != "xno"; then
    if test "x$GCC" = "xyes"; then
      case " $CFLAGS " in
      *\ \	-Wall\ \	*) ;;
      *) warnCFLAGS="-Wall -Wunused" ;;
      esac

      ## -W is not all that useful.  And it cannot be controlled
      ## with individual -Wno-xxx flags, unlike -Wall
      if test "x$enable_compile_warnings" = "xyes"; then
	warnCFLAGS="$warnCFLAGS -Wmissing-prototypes -Wmissing-declarations"
      fi
    fi
  fi
  echo "$ac_t""$warnCFLAGS" 1>&6

  # Check whether --enable-iso-c or --disable-iso-c was given.
if test "${enable_iso_c+set}" = set; then
  enableval="$enable_iso_c"
  :
else
  enable_iso_c=no
fi


  echo $ac_n "checking what language compliance flags to pass to the C compiler""... $ac_c" 1>&6
echo "configure:12675: checking what language compliance flags to pass to the C compiler" >&5
  complCFLAGS=
  if test "x$enable_iso_c" != "xno"; then
    if test "x$GCC" = "xyes"; then
      case " $CFLAGS " in
      *\ \	-ansi\ \	*) ;;
      *) complCFLAGS="$complCFLAGS -ansi" ;;
      esac

      case " $CFLAGS " in
      *\ \	-pedantic\ \	*) ;;
      *) complCFLAGS="$complCFLAGS -pedantic" ;;
      esac
    fi
  fi
  echo "$ac_t""$complCFLAGS" 1>&6
  if test "x$cflags_set" != "xyes"; then
    CFLAGS="$CFLAGS $warnCFLAGS $complCFLAGS"
    cflags_set=yes
    
  fi

    # Check whether --with-gdk-pixbuf-prefix or --without-gdk-pixbuf-prefix was given.
if test "${with_gdk_pixbuf_prefix+set}" = set; then
  withval="$with_gdk_pixbuf_prefix"
  gdk_pixbuf_prefix="$withval"
else
  gdk_pixbuf_prefix=""
fi

# Check whether --with-gdk-pixbuf-exec-prefix or --without-gdk-pixbuf-exec-prefix was given.
if test "${with_gdk_pixbuf_exec_prefix+set}" = set; then
  withval="$with_gdk_pixbuf_exec_prefix"
  gdk_pixbuf_exec_prefix="$withval"
else
  gdk_pixbuf_exec_prefix=""
fi

# Check whether --enable-gdk_pixbuftest or --disable-gdk_pixbuftest was given.
if test "${enable_gdk_pixbuftest+set}" = set; then
  enableval="$enable_gdk_pixbuftest"
  :
else
  enable_gdk_pixbuftest=yes
fi


  if test x$gdk_pixbuf_exec_prefix != x ; then
     gdk_pixbuf_args="$gdk_pixbuf_args --exec-prefix=$gdk_pixbuf_exec_prefix"
     if test x${GDK_PIXBUF_CONFIG+set} != xset ; then
        GDK_PIXBUF_CONFIG=$gdk_pixbuf_exec_prefix/bin/gdk-pixbuf-config
     fi
  fi
  if test x$gdk_pixbuf_prefix != x ; then
     gdk_pixbuf_args="$gdk_pixbuf_args --prefix=$gdk_pixbuf_prefix"
     if test x${GDK_PIXBUF_CONFIG+set} != xset ; then
        GDK_PIXBUF_CONFIG=$gdk_pixbuf_prefix/bin/gdk-pixbuf-config
     fi
  fi

  # Extract the first word of "gdk-pixbuf-config", so it can be a program name with args.
set dummy gdk-pixbuf-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:12738: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GDK_PIXBUF_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GDK_PIXBUF_CONFIG" in
  /*)
  ac_cv_path_GDK_PIXBUF_CONFIG="$GDK_PIXBUF_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GDK_PIXBUF_CONFIG="$GDK_PIXBUF_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GDK_PIXBUF_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GDK_PIXBUF_CONFIG" && ac_cv_path_GDK_PIXBUF_CONFIG="no"
  ;;
esac
fi
GDK_PIXBUF_CONFIG="$ac_cv_path_GDK_PIXBUF_CONFIG"
if test -n "$GDK_PIXBUF_CONFIG"; then
  echo "$ac_t""$GDK_PIXBUF_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  min_gdk_pixbuf_version=0.2.5
  echo $ac_n "checking for GDK_PIXBUF - version >= $min_gdk_pixbuf_version""... $ac_c" 1>&6
echo "configure:12773: checking for GDK_PIXBUF - version >= $min_gdk_pixbuf_version" >&5
  no_gdk_pixbuf=""
  if test "$GDK_PIXBUF_CONFIG" = "no" ; then
    no_gdk_pixbuf=yes
  else
    GDK_PIXBUF_CFLAGS=`$GDK_PIXBUF_CONFIG $gdk_pixbufconf_args --cflags`
    GDK_PIXBUF_LIBS=`$GDK_PIXBUF_CONFIG $gdk_pixbufconf_args --libs`

    gdk_pixbuf_major_version=`$GDK_PIXBUF_CONFIG $gdk_pixbuf_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
    gdk_pixbuf_minor_version=`$GDK_PIXBUF_CONFIG $gdk_pixbuf_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
    gdk_pixbuf_micro_version=`$GDK_PIXBUF_CONFIG $gdk_pixbuf_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
    if test "x$enable_gdk_pixbuftest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GDK_PIXBUF_CFLAGS"
      LIBS="$LIBS $GDK_PIXBUF_LIBS"
      rm -f conf.gdk_pixbuftest
      if test "$cross_compiling" = yes; then
  echo $ac_n "cross compiling; assumed OK... $ac_c"
else
  cat > conftest.$ac_ext <<EOF
#line 12797 "configure"
#include "confdefs.h"

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <gdk-pixbuf/gdk-pixbuf.h>

static char*
my_strdup (char *str)
{
  char *new_str;
  
  if (str)
    {
      new_str = malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;
  
  return new_str;
}

int main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.gdk_pixbuftest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_gdk_pixbuf_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gdk_pixbuf_version");
     exit(1);
   }

   if (($gdk_pixbuf_major_version > major) ||
      (($gdk_pixbuf_major_version == major) && ($gdk_pixbuf_minor_version > minor)) ||
      (($gdk_pixbuf_major_version == major) && ($gdk_pixbuf_minor_version == minor) && ($gdk_pixbuf_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'gdk-pixbuf-config --version' returned %d.%d.%d, but the minimum version\n", $gdk_pixbuf_major_version, $gdk_pixbuf_minor_version, $gdk_pixbuf_micro_version);
      printf("*** of GDK_PIXBUF required is %d.%d.%d. If gdk-pixbuf-config is correct, then it is\n", major, minor, micro);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If gdk-pixbuf-config was wrong, set the environment variable GDK_PIXBUF_CONFIG\n");
      printf("*** to point to the correct copy of gdk-pixbuf-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}


EOF
if { (eval echo configure:12855: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_gdk_pixbuf=yes
fi
rm -fr conftest*
fi

       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_gdk_pixbuf" = x ; then
     echo "$ac_t""yes" 1>&6
     :     
  else
     echo "$ac_t""no" 1>&6
     if test "$GDK_PIXBUF_CONFIG" = "no" ; then
       echo "*** The gdk-pixbuf-config script installed by GDK_PIXBUF could not be found"
       echo "*** If GDK_PIXBUF was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GDK_PIXBUF_CONFIG environment variable to the"
       echo "*** full path to gdk-pixbuf-config."
     else
       if test -f conf.gdk_pixbuftest ; then
        :
       else
          echo "*** Could not run GDK_PIXBUF test program, checking why..."
          CFLAGS="$CFLAGS $GDK_PIXBUF_CFLAGS"
          LIBS="$LIBS $GDK_PIXBUF_LIBS"
          cat > conftest.$ac_ext <<EOF
#line 12889 "configure"
#include "confdefs.h"

#include <stdio.h>
#include <gdk-pixbuf/gdk-pixbuf.h>

int main() {
 return 0; 
; return 0; }
EOF
if { (eval echo configure:12899: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GDK_PIXBUF or finding the wrong"
          echo "*** version of GDK_PIXBUF. If it is not finding GDK_PIXBUF, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GDK_PIXBUF was incorrectly installed"
          echo "*** or that you have moved GDK_PIXBUF since it was installed. In the latter case, you"
          echo "*** may want to edit the gdk-pixbuf-config script: $GDK_PIXBUF_CONFIG" 
fi
rm -f conftest*
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GDK_PIXBUF_CFLAGS=""
     GDK_PIXBUF_LIBS=""
     :
  fi
  
  
  rm -f conf.gdk_pixbuftest

    
	
  min_version=0.21

  gnome_print_ok=""

  # Extract the first word of "gnome-config", so it can be a program name with args.
set dummy gnome-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:12941: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GNOME_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GNOME_CONFIG" in
  /*)
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GNOME_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GNOME_CONFIG" && ac_cv_path_GNOME_CONFIG="no"
  ;;
esac
fi
GNOME_CONFIG="$ac_cv_path_GNOME_CONFIG"
if test -n "$GNOME_CONFIG"; then
  echo "$ac_t""$GNOME_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test "$GNOME_CONFIG" = "no" ; then
    echo "$ac_t""gnome-config is missing" 1>&6
  else
    echo $ac_n "checking for GNOME-PRINT - version >= $min_version""... $ac_c" 1>&6
echo "configure:12978: checking for GNOME-PRINT - version >= $min_version" >&5
    if `$GNOME_CONFIG --libs print > /dev/null 2>&1`; then
      rqmajor=`echo "$min_version" | sed -e 's/cvs-//' | sed 's/\([0-9]*\)\.\([0-9]*\).*/\1/'`
      rqminor=`echo "$min_version" | sed -e 's/cvs-//' | sed 's/\([0-9]*\)\.\([0-9]*\).*/\2/'`
      major=`$GNOME_CONFIG --modversion print | sed -e 's/gnome-print-//' | sed -e 's/cvs-//' | sed 's/\([0-9]*\)\.\([0-9]*\).*/\1/'`
      minor=`$GNOME_CONFIG --modversion print | sed -e 's/gnome-print-//' | sed -e 's/cvs-//' | sed 's/\([0-9]*\)\.\([0-9]*\).*/\2/'`
      if test "$major" -ge "$rqmajor"; then
        if test "$major" -gt "$rqmajor"; then
          echo "$ac_t"""found $major.$minor"" 1>&6
          gnome_print_ok="yes"
        else
          if test "$minor" -ge "$rqminor"; then
            echo "$ac_t"""found $major.$minor"" 1>&6
            gnome_print_ok="yes"
          else
            echo "$ac_t"""you have $major.$minor"" 1>&6
          fi
        fi
      else
        echo "$ac_t"""you have $major.$minor"" 1>&6
      fi
    else
      echo "$ac_t"""did not find any version"" 1>&6
    fi
  fi

  if test "x$gnome_print_ok" != "x" ; then
    GNOME_PRINT_CFLAGS=`$GNOME_CONFIG --cflags print`
    GNOME_PRINT_LIBS=`$GNOME_CONFIG --libs print`
    :
  else
     GNOME_PRINT_CFLAGS=""
     GNOME_PRINT_LIBS=""
     { echo "configure: error: GNOME-PRINT not found or wrong version" 1>&2; exit 1; }
  fi

  
  


    
    # gnome-print-check appears tobe sort of b0rked for the time being
    GNOME_PRINT_CFLAGS=`${GNOME_CONFIG} --cflags print`
    
  GIVEN_CFLAGS=$GNOME_PRINT_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  GNOME_PRINT_CFLAGS=$GIVEN_CFLAGS

    
    ### ----------------------------------------------------------------------
    ### Check for glade
    
    # Check whether --with-libglade-config or --without-libglade-config was given.
if test "${with_libglade_config+set}" = set; then
  withval="$with_libglade_config"
  LIBGLADE_CONFIG="$withval"
fi


module_args=
for module in . ; do
  case "$module" in
    gnome)
      module_args="$module_args gnome"
      ;;
    bonobo)
      module_args="$module_args bonobo"
      ;;
    gnomedb)
      module_args="$module_args gnomedb"
      ;;
  esac
done

# Extract the first word of "libglade-config", so it can be a program name with args.
set dummy libglade-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:13060: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LIBGLADE_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$LIBGLADE_CONFIG" in
  /*)
  ac_cv_path_LIBGLADE_CONFIG="$LIBGLADE_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_LIBGLADE_CONFIG="$LIBGLADE_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_LIBGLADE_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_LIBGLADE_CONFIG" && ac_cv_path_LIBGLADE_CONFIG="no"
  ;;
esac
fi
LIBGLADE_CONFIG="$ac_cv_path_LIBGLADE_CONFIG"
if test -n "$LIBGLADE_CONFIG"; then
  echo "$ac_t""$LIBGLADE_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

echo $ac_n "checking for libglade""... $ac_c" 1>&6
echo "configure:13094: checking for libglade" >&5
if test "$LIBGLADE_CONFIG" = "no"; then
  echo "$ac_t""no" 1>&6
  :
else
  if $LIBGLADE_CONFIG --check $module_args; then
    LIBGLADE_CFLAGS=`$LIBGLADE_CONFIG --cflags $module_args`
    LIBGLADE_LIBS=`$LIBGLADE_CONFIG --libs $module_args`
    echo "$ac_t""yes" 1>&6
    :
  else
    echo "*** libglade was not compiled with support for $module_args" 1>&2
    echo "$ac_t""no" 1>&6
    :
  fi
fi



    
    GLADE_LIBS="$LIBGLADE_LIBS"
    GLADE_CFLAGS="$LIBGLADE_CFLAGS"
    
    
  GIVEN_CFLAGS=$GLADE_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  GLADE_CFLAGS=$GIVEN_CFLAGS

    
    
    
    
    ### ----------------------------------------------------------------------
    echo $ac_n "checking for main in -lgal""... $ac_c" 1>&6
echo "configure:13133: checking for main in -lgal" >&5
ac_lib_var=`echo gal'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lgal `$GNOME_CONFIG --libs gal` $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13141 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
EOF
if { (eval echo configure:13148: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  true
else
  echo "$ac_t""no" 1>&6
{ echo "configure: error: gal library not found. See the README and config.log for more info." 1>&2; exit 1; }
fi

    
    echo $ac_n "checking for gtkhtml < 1.1""... $ac_c" 1>&6
echo "configure:13171: checking for gtkhtml < 1.1" >&5
    GTKHTML_LIBS=`$GNOME_CONFIG --libs gtkhtml`
    GTKHTML_CFLAGS=`$GNOME_CONFIG --cflags gtkhtml`
    
  GIVEN_CFLAGS=$GTKHTML_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  GTKHTML_CFLAGS=$GIVEN_CFLAGS

    if test "x$GTKHTML_LIBS" != x; then
	# check for gtkhtml and enable it via HAVE_LIBGTKHTML
	# if found
	echo $ac_n "checking for gtk_html_new in -lgtkhtml""... $ac_c" 1>&6
echo "configure:13188: checking for gtk_html_new in -lgtkhtml" >&5
ac_lib_var=`echo gtkhtml'_'gtk_html_new | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lgtkhtml $GTKHTML_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13196 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char gtk_html_new();

int main() {
gtk_html_new()
; return 0; }
EOF
if { (eval echo configure:13207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  GNOMEBUILDLIBS="${GNOMEBUILDLIBS}"
		     cat >> confdefs.h <<\EOF
#define HAVE_LIBGTKHTML 1
EOF

else
  echo "$ac_t""no" 1>&6
{ echo "configure: error: Cannot find gtkhtml. See the README and config.log for more info." 1>&2; exit 1; }
fi

    else
	# Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:13236: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$PKG_CONFIG" in
  /*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
if test -n "$PKG_CONFIG"; then
  echo "$ac_t""$PKG_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

	if test "x$PKG_CONFIG" = x; then
	    # @*%&$ Ximian programmers renamed this application
	    # Extract the first word of "pkgconfig", so it can be a program name with args.
set dummy pkgconfig; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:13273: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$PKG_CONFIG" in
  /*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
if test -n "$PKG_CONFIG"; then
  echo "$ac_t""$PKG_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

	    if test "x$PKG_CONFIG" = x; then
	    	{ echo "configure: error: Could not find the pkg-config (or pkgconfig) program." 1>&2; exit 1; }
	    fi
	fi
	GTKHTML_LIBS=`$PKG_CONFIG --libs gtkhtml-1.1`
	GTKHTML_CFLAGS=`$PKG_CONFIG --cflags gtkhtml-1.1`
        
  GIVEN_CFLAGS=$GTKHTML_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  GTKHTML_CFLAGS=$GIVEN_CFLAGS

	# check for gtkhtml and enable it via HAVE_LIBGTKHTML
	# if found
	echo $ac_n "checking for gtkhtml >= 1.1""... $ac_c" 1>&6
echo "configure:13324: checking for gtkhtml >= 1.1" >&5
	echo $ac_n "checking for gtk_html_new in -lgtkhtml-1.1""... $ac_c" 1>&6
echo "configure:13326: checking for gtk_html_new in -lgtkhtml-1.1" >&5
ac_lib_var=`echo gtkhtml-1.1'_'gtk_html_new | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lgtkhtml-1.1 $GTKHTML_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13334 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char gtk_html_new();

int main() {
gtk_html_new()
; return 0; }
EOF
if { (eval echo configure:13345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  GNOMEBUILDLIBS="${GNOMEBUILDLIBS} $GTKHTML_TEST_LIB"
		     cat >> confdefs.h <<\EOF
#define HAVE_LIBGTKHTML 1
EOF

else
  echo "$ac_t""no" 1>&6
{ echo "configure: error: Cannot find gtkhtml-1.1. See the README and config.log for more info." 1>&2; exit 1; }
fi

    fi
    
    GHTTP_LIBS=`$GNOME_CONFIG --libs ghttp`
    GHTTP_CFLAGS=`$GNOME_CONFIG --cflags ghttp`
    
    # Note: this doesn't croak if GHTTP_LIBS is empty! (e.g. on RH6.2)
    echo $ac_n "checking for ghttp_request_new in -lghttp""... $ac_c" 1>&6
echo "configure:13377: checking for ghttp_request_new in -lghttp" >&5
ac_lib_var=`echo ghttp'_'ghttp_request_new | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lghttp $GHTTP_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13385 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char ghttp_request_new();

int main() {
ghttp_request_new()
; return 0; }
EOF
if { (eval echo configure:13396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  GNOMEBUILDLIBS="${GNOMEBUILDLIBS} ghttp"
                 cat >> confdefs.h <<\EOF
#define HAVE_LIBGHTTP 1
EOF

    	     if test "x$GHTTP_LIBS" = "x" ; then
    		GHTTP_LIBS=-lghttp
    	     fi
else
  echo "$ac_t""no" 1>&6
{ echo "configure: error: Cannot find ghttp. See the README and config.log for more info." 1>&2; exit 1; }
fi

    
    echo $ac_n "checking for ghttp_enable_ssl in -lghttp""... $ac_c" 1>&6
echo "configure:13426: checking for ghttp_enable_ssl in -lghttp" >&5
ac_lib_var=`echo ghttp'_'ghttp_enable_ssl | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lghttp $GHTTP_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13434 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char ghttp_enable_ssl();

int main() {
ghttp_enable_ssl()
; return 0; }
EOF
if { (eval echo configure:13445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_OPENSSL 1
EOF

else
  echo "$ac_t""no" 1>&6
echo "configure: warning: ****** ghttp does not have SSL support." 1>&2
fi

    
    
  GIVEN_CFLAGS=$GHTTP_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  GHTTP_CFLAGS=$GIVEN_CFLAGS

    
    
    
    
    
    
    ### ----------------------------------------------------------------------
    ### guppi
    
    # Check whether --enable-guppi or --disable-guppi was given.
if test "${enable_guppi+set}" = set; then
  enableval="$enable_guppi"
  if test $enableval = no; then
        USE_GUPPI=0
      else
        USE_GUPPI=1
      fi
else
  USE_GUPPI=1 
fi

    
    if test ${USE_GUPPI} = 0; then
      echo "configure: warning: Compiling without guppi support" 1>&2
    else
      cat >> confdefs.h <<\EOF
#define USE_GUPPI 1
EOF

    
    
    # Check whether --enable-efence or --disable-efence was given.
if test "${enable_efence+set}" = set; then
  enableval="$enable_efence"
  if test $enableval = yes; then
         EFENCE_LIBS="-lefence"
         USE_EFENCE=1
	 cat >> confdefs.h <<\EOF
#define USE_EFENCE 1
EOF

      fi
else
  USE_EFENCE=0
      EFENCE_LIBS=""
fi

    
    
    ## Things guppi needs (actually are these guppi dependencies or gtkhtml's?)
    
    # LAME: if you ask gnome-config for the zvt libs, it doesn't include
    # imlib, though it needs it so we'll just steal gtkhtml's which does.
    echo $ac_n "checking for main in -lzvt""... $ac_c" 1>&6
echo "configure:13534: checking for main in -lzvt" >&5
ac_lib_var=`echo zvt'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lzvt `$GNOME_CONFIG --libs zvt` $GTKHTML_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13542 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
EOF
if { (eval echo configure:13549: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  true
else
  echo "$ac_t""no" 1>&6
{ echo "configure: error: libzvt development files not found. See config.log." 1>&2; exit 1; }
fi

    
    #AC_CHECK_LIB(bonobo, main, true,
    #  [AC_MSG_ERROR([libbonobo development files not found. See config.log.])
    #],
    #  `$GNOME_CONFIG --libs bonobo`)
    
    echo $ac_n "checking for main in -loaf""... $ac_c" 1>&6
echo "configure:13577: checking for main in -loaf" >&5
ac_lib_var=`echo oaf'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-loaf `$GNOME_CONFIG --libs oaf` $LIBS"
cat > conftest.$ac_ext <<EOF
#line 13585 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
EOF
if { (eval echo configure:13592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  true
else
  echo "$ac_t""no" 1>&6
{ echo "configure: error: liboaf development files not found. See config.log." 1>&2; exit 1; }
fi

    
    ## guppi itself.
    
    GUPPI_LIBS=`$GNOME_CONFIG --libs libguppi`
    GUPPI_CFLAGS=`$GNOME_CONFIG --cflags libguppi`
    
  GIVEN_CFLAGS=$GUPPI_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  GUPPI_CFLAGS=$GIVEN_CFLAGS

    
	# Check whether --with-libguppi-prefix or --without-libguppi-prefix was given.
if test "${with_libguppi_prefix+set}" = set; then
  withval="$with_libguppi_prefix"
  libguppi_prefix="$withval"
else
  libguppi_prefix=""
fi

# Check whether --with-libguppi-exec-prefix or --without-libguppi-exec-prefix was given.
if test "${with_libguppi_exec_prefix+set}" = set; then
  withval="$with_libguppi_exec_prefix"
  libguppi_exec_prefix="$withval"
else
  libguppi_exec_prefix=""
fi

# Check whether --enable-libguppitest or --disable-libguppitest was given.
if test "${enable_libguppitest+set}" = set; then
  enableval="$enable_libguppitest"
  :
else
  enable_libguppitest=yes
fi


  if test x$libguppi_exec_prefix != x ; then
     libguppi_args="$libguppi_args --exec-prefix=$libguppi_exec_prefix"
     if test x${GNOME_CONFIG+set} != xset ; then
        GNOME_CONFIG=$libguppi_exec_prefix/bin/gnome-config
     fi
  fi
  if test x$libguppi_prefix != x ; then
     libguppi_args="$libguppi_args --prefix=$libguppi_prefix"
     if test x${GNOME_CONFIG+set} != xset ; then
        GNOME_CONFIG=$libguppi_prefix/bin/gnome-config
     fi
  fi

  # Extract the first word of "gnome-config", so it can be a program name with args.
set dummy gnome-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:13670: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GNOME_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GNOME_CONFIG" in
  /*)
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GNOME_CONFIG="$GNOME_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GNOME_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GNOME_CONFIG" && ac_cv_path_GNOME_CONFIG="no"
  ;;
esac
fi
GNOME_CONFIG="$ac_cv_path_GNOME_CONFIG"
if test -n "$GNOME_CONFIG"; then
  echo "$ac_t""$GNOME_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  min_libguppi_version=0.35.1
  echo $ac_n "checking for libguppi - version >= $min_libguppi_version""... $ac_c" 1>&6
echo "configure:13705: checking for libguppi - version >= $min_libguppi_version" >&5
  no_libguppi=""
  if test "$GNOME_CONFIG" = "no" ; then
    no_libguppi=yes
  else
    LIBGUPPI_CFLAGS=`$GNOME_CONFIG $libguppiconf_args --cflags gtk libguppi`
    LIBGUPPI_LIBS=`$GNOME_CONFIG $libguppiconf_args --libs gtk libguppi`
    
  GIVEN_CFLAGS=$LIBGUPPI_CFLAGS
  INCLUDE_DIRS=`echo | cpp -v 2>&1`

      INCLUDE_DIRS=`echo $INCLUDE_DIRS | sed -e 's/.*<...> search starts here://' | sed -e 's/End of search list.*//'`
  for dir in $INCLUDE_DIRS; do
    GIVEN_CFLAGS=$(echo $GIVEN_CFLAGS | sed -e "s;-I$dir ;;" | sed -e "s;-I$dir$;;")
  done
  LIBGUPPI_CFLAGS=$GIVEN_CFLAGS


    libguppi_major_version=`$GNOME_CONFIG --modversion libguppi | \
           sed 's/libguppi-\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
    libguppi_minor_version=`$GNOME_CONFIG --modversion libguppi | \
           sed 's/libguppi-\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
    libguppi_micro_version=`$GNOME_CONFIG --modversion libguppi | \
           sed 's/libguppi-\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`

    if test "x$enable_libguppitest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $LIBGUPPI_CFLAGS"
      LIBS="$LIBS $LIBGUPPI_LIBS"
      rm -f conf.libguppitest
      if test "$cross_compiling" = yes; then
  echo $ac_n "cross compiling; assumed OK... $ac_c"
else
  cat > conftest.$ac_ext <<EOF
#line 13740 "configure"
#include "confdefs.h"

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <libguppi/guppi-version.h>

static char*
my_strdup (char *str)
{
  char *new_str;
  
  if (str)
    {
      new_str = malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;
  
  return new_str;
}

int main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.libguppitest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_libguppi_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_libguppi_version");
     exit(1);
   }

   if (($libguppi_major_version != guppi_version_major()) ||
       ($libguppi_minor_version != guppi_version_minor()) ||
       ($libguppi_micro_version != guppi_version_micro())) {
	printf("\n*** 'gnome-config --modversion libguppi' returned %d.%d.%d, but the installed\n", $libguppi_major_version, $libguppi_minor_version, $libguppi_micro_version);
	printf("*** LIBGUPPI reports its own version as %s.\n\n", guppi_version());
	printf("*** This probably means that LIBGUPPI is improperly installed.\n");
	return 1;
   }	

   if (($libguppi_major_version > major) ||
      (($libguppi_major_version == major) && ($libguppi_minor_version > minor)) ||
      (($libguppi_major_version == major) && ($libguppi_minor_version == minor) && ($libguppi_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'gnome-config --modversion libguppi' returned %d.%d.%d, but the minimum version\n", $libguppi_major_version, $libguppi_minor_version, $libguppi_micro_version);
      printf("*** of libguppi required is %d.%d.%d. If gnome-config is correct, then it is\n", major, minor, micro);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If gnome-config was wrong, set the environment variable GNOME_CONFIG\n");
      printf("*** to point to the correct copy of gnome-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}


EOF
if { (eval echo configure:13807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_libguppi=yes
fi
rm -fr conftest*
fi

       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_libguppi" = x ; then
     echo "$ac_t""yes" 1>&6
     :     
  else
     echo "$ac_t""no" 1>&6
     if test "$GNOME_CONFIG" = "no" ; then
       echo "*** The gnome-config script installed by GNOME-LIBS could not be found"
       echo "*** If libguppi was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GNOME_CONFIG environment variable to the"
       echo "*** full path to gnome-config."
     else
       if test -f conf.libguppitest ; then
        :
       else
          echo "*** Could not run libguppi test program, checking why..."
          CFLAGS="$CFLAGS $LIBGUPPI_CFLAGS"
          LIBS="$LIBS $LIBGUPPI_LIBS"
          cat > conftest.$ac_ext <<EOF
#line 13841 "configure"
#include "confdefs.h"

#include <stdio.h>
#include <libguppi/guppi-useful.h>

int main() {
 return 0; 
; return 0; }
EOF
if { (eval echo configure:13851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding libguppi or finding the wrong"
          echo "*** version of libguppi. If it is not finding libguppi, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means libguppi was incorrectly installed"
          echo "*** or that you have moved libguppi since it was installed. In the latter case, you"
          echo "*** may want to edit the gnome-config script: $GNOME_CONFIG" 
fi
rm -f conftest*
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     LIBGUPPI_CFLAGS=""
     LIBGUPPI_LIBS=""
     { echo "configure: error: libguppi not found" 1>&2; exit 1; }
  fi
  
  
  rm -f conf.libguppitest


    
    
    
    fi
    
    ### ----------------------------------------------------------------------
    ### XIM
    # Check whether --enable-xim or --disable-xim was given.
if test "${enable_xim+set}" = set; then
  enableval="$enable_xim"
  :
else
  enable_xim="yes"
fi

    
    if test "x$enable_xim" = "xyes"; then
      GTK_XIM_FLAGS="-DUSE_XIM"
    fi
    
    
    
    
    ### ----------------------------------------------------------------------
    ## For now, we just presume you're using the GNOME version.  The other
    ## UI's haven't been carried over during the automake transition.  At
    ## some point, if it's deemed worthwhile, they can be resurrected...
    
    GNOME=1
    cat >> confdefs.h <<\EOF
#define GNOME 1
EOF
  
else
  # GNOME_COMPILE_WARNINGS will add -Wall; no need to set it again.
  # also, only add it for GCC.
  if test ${GCC}x = yesx
  then
     # We should always see these errors...
     CFLAGS="${CFLAGS} -Wall"
  fi
fi

###-------------------------------------------------------------------------
### Stuff from Mac OS X Port
###-------------------------------------------------------------------------

for ac_func in pthread_mutex_init
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:13935: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 13940 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:13963: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

for ac_func in strptime localtime_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:13990: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 13995 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:14018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}"
fi
done


#AC_REPLACE_FUNCS(scm_strptime)

if test $am_cv_val_LC_MESSAGES = "no"; then
  LC_MESSAGES_ENUM="LC_ALL"
else
  LC_MESSAGES_ENUM="LC_MESSAGES"
fi


if test $am_cv_scanf_lld = "no"; then
  echo $ac_n "checking if scanf supports %qd conversion""... $ac_c" 1>&6
echo "configure:14055: checking if scanf supports %qd conversion" >&5
  if test "$cross_compiling" = yes; then
    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
  cat > conftest.$ac_ext <<EOF
#line 14060 "configure"
#include "confdefs.h"

#include <stdio.h>
#include <stdlib.h>

int main ()
{
  long long int d;
  d = 0;
  if ((sscanf ("10000000000", "%qd", &d) != 1) || (d != 10000000000))
    exit (1);
  exit (0);
}

EOF
if { (eval echo configure:14076: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  
        cat >> confdefs.h <<\EOF
#define HAVE_SCANF_QD 1
EOF

        echo "$ac_t""yes" 1>&6
        
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  
        echo "$ac_t""no" 1>&6
        { echo "configure: error: cannot continue, no long long conversion support in scanf" 1>&2; exit 1; }
        
fi
rm -fr conftest*
fi

fi


### --------------------------------------------------------------------------
### GnuCash flags and libs configuration

GNUCASH_ENGINE_BASE_LIBS="${GLIB_LIBS}"
GNUCASH_ENGINE_LIBS="-L${GNC_MODULE_DIR} -L${GNC_GWRAP_LIBDIR} ${GNUCASH_ENGINE_BASE_LIBS} ${GUILE_LIBS} -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule"

GNUCASH_ENGINE_BASE_CFLAGS="${GLIB_CFLAGS} ${G_WRAP_COMPILE_ARGS}"
GNUCASH_ENGINE_CFLAGS="${GNUCASH_ENGINE_BASE_CFLAGS} ${GUILE_INCS}"






GNUCASH_APP_UTILS_CFLAGS="${GNUCASH_ENGINE_CFLAGS}"
GNUCASH_APP_UTILS_LIBS="${GNUCASH_ENGINE_LIBS} -lgncmod-calculation -lgncmod-app-utils"




GNUCASH_NETWORK_UTILS_CFLAGS="${GLIB_CFLAGS} ${GHTTP_CFLAGS} ${GNOME_INCLUDEDIR}"
GNUCASH_NETWORK_UTILS_LIBS="${GHTTP_LIBS} ${GNOME_LIBDIR} ${GNOME_LIBS} ${GNOMEUI_LIBS} -lgncmod-network-utils"




GNUCASH_GNOME_UTILS_CFLAGS="${GNUCASH_APP_UTILS_CFLAGS} ${GNUCASH_NETWORK_UTILS_CFLAGS} ${GNOME_PRINT_CFLAGS} ${GNOME_INCLUDEDIR} ${GUPPI_CFLAGS} ${GDK_PIXBUF_CFLAGS}"
GNUCASH_GNOME_UTILS_LIBS="${GNUCASH_APP_UTILS_LIBS} ${GNUCASH_NETWORK_UTILS_LIBS} ${GNOME_LIBDIR} ${GNOMEUI_LIBS} ${GNOME_PRINT_LIBS} ${GTKHTML_LIBS} ${GLADE_LIBS} ${GUPPI_LIBS} ${GDK_PIXBUF_LIBS} -lgncmod-gnome-utils"




GNUCASH_REGISTER_CORE_CFLAGS="${GNUCASH_GNOME_UTILS_CFLAGS}"
GNUCASH_REGISTER_CORE_LIBS="${GNUCASH_GNOME_UTILS_LIBS} -lgncmod-register-core"






if test "x${srcdir}" != "x."; then
  GNUCASH_SEPARATE_BUILDDIR_TRUE=
  GNUCASH_SEPARATE_BUILDDIR_FALSE='#'
else
  GNUCASH_SEPARATE_BUILDDIR_TRUE='#'
  GNUCASH_SEPARATE_BUILDDIR_FALSE=
fi


if false; then
  GNC_FALSE_TRUE=
  GNC_FALSE_FALSE='#'
else
  GNC_FALSE_TRUE='#'
  GNC_FALSE_FALSE=
fi

###-------------------------------------------------------------------------
### Additional compiler warnings (or not) if we're running GCC
###-------------------------------------------------------------------------

# This has to come after AC_PROG_CC _AND_ GNOME_COMPILE_WARNINGS
echo $ac_n "checking what extra warning flags to pass to the C compiler""... $ac_c" 1>&6
echo "configure:14163: checking what extra warning flags to pass to the C compiler" >&5
if test ${GCC}x = yesx
then
  warnFLAGS=
  # These two are because of g-wrap -- it can't avoid unused and uninitialized.
  #warnFLAGS="${warnFLAGS} -Wno-uninitialized"
  #warnFLAGS="${warnFLAGS} -Wno-unused"
  # other flags...
  # These next two are included in the GNOME_COMPILE_WARNINGS
  #warnFLAGS="${warnFLAGS} -Wmissing-prototypes"
  #warnFLAGS="${warnFLAGS} -Wmissing-declarations"
  #warnFLAGS="${warnFLAGS} -Werror-implicit-function-declaration" # In -Wall


  ## Disable error-on-warning by default again because this seriously
  ## breaks quite a number of configure tests (due to, like, 'warning:
  ## unused variable some_variable') -- cstim, 02/02/2003
  #
  # Re-enabled and moved to later in the build process.  This should allow
  # us to keep it turned on, but also not break configure proceses.
  # -- warlord, 02/02/2003

  # Enable error-on-warning by default -- I'm tired of fixing other
  # people's missing #includes, etc.
  # Check whether --enable-error-on-warning or --disable-error-on-warning was given.
if test "${enable_error_on_warning+set}" = set; then
  enableval="$enable_error_on_warning"
  case "${enableval}" in
       yes) warnFLAGS="${warnFLAGS} -Werror" ;;
       no)  ;;
       *) { echo "configure: error: bad value ${enableval} for --enable-error-on-warning" 1>&2; exit 1; } ;;
     esac
else
    warnFLAGS="${warnFLAGS} -Werror" 
fi


  CFLAGS="${CFLAGS} ${warnFLAGS}"

else
  warnFLAGS=none
fi
echo "$ac_t""$warnFLAGS" 1>&6

### --------------------------------------------------------------------------
### Adjustments -- especially executables that aren't generated via
### makefiles, so that we don't have an opportunity to adjust them
### there.

chmod u+x ${srcdir}/src/gnc-test-env
chmod u+x ${srcdir}/src/bin/generate-gnc-script
chmod u+x ${srcdir}/src/bin/overrides/gnucash
chmod u+x ${srcdir}/src/bin/overrides/gnucash-run-script
chmod u+x ${srcdir}/src/bin/overrides/gnucash-make-guids

### --------------------------------------------------------------------------
### Makefile creation

# This is necessary so that .o files in LIBOBJS are also built via
# the ANSI2KNR-filtering rules.
LIBOBJS_SEDSCRIPT="s,\.[^.]* ,$U&,g;s,\.[^.]*\$\$,$U&,"


trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "m4/Makefile  intl/Makefile po/Makefile.in intl/Makefile po/Makefile.in 
                    Makefile
          accounts/Makefile
          accounts/C/Makefile
          accounts/da/Makefile
          accounts/de_DE/Makefile
          accounts/el_GR/Makefile
          accounts/es_ES/Makefile
          accounts/fr_FR/Makefile
          accounts/pt_BR/Makefile
          accounts/pt_PT/Makefile
          accounts/sk/Makefile
          debian/Makefile
          doc/Makefile
          doc/examples/Makefile
          intl-scm/Makefile
          lib/Makefile
          lib/guile-www/Makefile
          lib/srfi/Makefile
	  lib/libc/Makefile
          macros/Makefile
          rpm/Makefile
          src/Makefile
          src/app-file/Makefile
          src/app-file/test/Makefile
          src/app-file/gnome/Makefile
          src/app-utils/Makefile
          src/app-utils/test/Makefile
          src/backend/Makefile
          src/backend/net/Makefile
          src/backend/file/Makefile
          src/backend/file/test/Makefile
          src/backend/file/test/test-files/Makefile
          src/backend/file/test/test-files/xml2/Makefile
          src/backend/postgres/Makefile
          src/backend/postgres/test/Makefile
          src/backend/rpc/Makefile
          src/bin/Makefile
          src/bin/overrides/Makefile
          src/bin/test/Makefile
          src/core-utils/Makefile
          src/calculation/Makefile 
          src/calculation/test/Makefile 
          src/doc/Makefile
          src/doc/design/Makefile
          src/doc/xml/Makefile
          src/engine/Makefile
          src/engine/test/Makefile
          src/engine/test-core/Makefile
          src/experimental/Makefile
          src/experimental/cbb/Makefile
          src/experimental/cbb/cbb-engine/Makefile
          src/experimental/cgi-bin/Makefile
          src/experimental/gg/Makefile
          src/gnc-module/Makefile
          src/gnc-module/test/Makefile
          src/gnc-module/test/mod-foo/Makefile
          src/gnc-module/test/mod-bar/Makefile
          src/gnc-module/test/mod-baz/Makefile
          src/gnc-module/test/misc-mods/Makefile
          src/gnome/Makefile
          src/gnome/glade/Makefile
          src/gnome-utils/Makefile
          src/gnome-utils/test/Makefile
          src/gnome-search/Makefile
          src/import-export/Makefile
          src/import-export/test/Makefile
          src/import-export/binary-import/Makefile
          src/import-export/binary-import/test/Makefile
          src/import-export/qif-import/Makefile
          src/import-export/qif-import/test/Makefile
          src/import-export/qif-io-core/Makefile
          src/import-export/qif-io-core/test/Makefile
          src/import-export/ofx/Makefile
          src/import-export/ofx/test/Makefile
          src/import-export/hbci/Makefile
          src/import-export/hbci/glade/Makefile
          src/import-export/hbci/test/Makefile
          src/network-utils/Makefile
          src/network-utils/test/Makefile
          src/optional/Makefile
          src/optional/swig/Makefile
          src/optional/swig/examples/Makefile
          src/pixmaps/Makefile
          src/quotes/Makefile
          src/register/Makefile
          src/register/ledger-core/Makefile
          src/register/ledger-core/test/Makefile
          src/register/register-core/Makefile
          src/register/register-core/test/Makefile
          src/register/register-gnome/Makefile
          src/register/register-gnome/test/Makefile
          src/report/Makefile
          src/report/report-gnome/Makefile
          src/report/report-gnome/test/Makefile
          src/report/report-system/Makefile
          src/report/report-system/test/Makefile
          src/report/standard-reports/Makefile
          src/report/standard-reports/test/Makefile
          src/report/locale-specific/Makefile
          src/report/locale-specific/us/Makefile
          src/report/locale-specific/us/test/Makefile
          src/report/stylesheets/Makefile
          src/report/stylesheets/test/Makefile
          src/report/utility-reports/Makefile
          src/report/utility-reports/test/Makefile
          src/scm/Makefile
          src/scm/gnumeric/Makefile
          src/scm/printing/Makefile
          src/tax/Makefile
          src/tax/us/Makefile
          src/tax/us/test/Makefile
          src/test-core/Makefile
          src/business/Makefile
          src/business/business-core/Makefile
          src/business/business-core/test/Makefile
          src/business/business-core/file/Makefile
          src/business/business-utils/Makefile
          src/business/dialog-tax-table/Makefile
          src/business/business-gnome/Makefile
          src/business/business-gnome/glade/Makefile
          src/business/business-ledger/Makefile
          src/business/business-reports/Makefile

                    
                              gnucash-config
           config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@CC@%$CC%g
s%@GNUCASH_MAJOR_VERSION@%$GNUCASH_MAJOR_VERSION%g
s%@GNUCASH_MINOR_VERSION@%$GNUCASH_MINOR_VERSION%g
s%@GNUCASH_MICRO_VERSION@%$GNUCASH_MICRO_VERSION%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@AUTOCONF@%$AUTOCONF%g
s%@AUTOMAKE@%$AUTOMAKE%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
s%@INTLTOOL_DESKTOP_RULE@%$INTLTOOL_DESKTOP_RULE%g
s%@INTLTOOL_DIRECTORY_RULE@%$INTLTOOL_DIRECTORY_RULE%g
s%@INTLTOOL_KEYS_RULE@%$INTLTOOL_KEYS_RULE%g
s%@INTLTOOL_OAF_RULE@%$INTLTOOL_OAF_RULE%g
s%@INTLTOOL_PONG_RULE@%$INTLTOOL_PONG_RULE%g
s%@INTLTOOL_SERVER_RULE@%$INTLTOOL_SERVER_RULE%g
s%@INTLTOOL_SHEET_RULE@%$INTLTOOL_SHEET_RULE%g
s%@INTLTOOL_SOUNDLIST_RULE@%$INTLTOOL_SOUNDLIST_RULE%g
s%@INTLTOOL_UI_RULE@%$INTLTOOL_UI_RULE%g
s%@INTLTOOL_XML_RULE@%$INTLTOOL_XML_RULE%g
s%@INTLTOOL_CAVES_RULE@%$INTLTOOL_CAVES_RULE%g
s%@INTLTOOL_EXTRACT@%$INTLTOOL_EXTRACT%g
s%@INTLTOOL_MERGE@%$INTLTOOL_MERGE%g
s%@INTLTOOL_UPDATE@%$INTLTOOL_UPDATE%g
s%@INTLTOOL_PERL@%$INTLTOOL_PERL%g
s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
s%@MSGFMT@%$MSGFMT%g
s%@GMSGFMT@%$GMSGFMT%g
s%@XGETTEXT@%$XGETTEXT%g
s%@MSGMERGE@%$MSGMERGE%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@RANLIB@%$RANLIB%g
s%@CPP@%$CPP%g
s%@ALLOCA@%$ALLOCA%g
s%@GLIBC21@%$GLIBC21%g
s%@LIBICONV@%$LIBICONV%g
s%@LTLIBICONV@%$LTLIBICONV%g
s%@INTLBISON@%$INTLBISON%g
s%@USE_NLS@%$USE_NLS%g
s%@BUILD_INCLUDED_LIBINTL@%$BUILD_INCLUDED_LIBINTL%g
s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
s%@CATOBJEXT@%$CATOBJEXT%g
s%@INTLOBJS@%$INTLOBJS%g
s%@DATADIRNAME@%$DATADIRNAME%g
s%@INSTOBJEXT@%$INSTOBJEXT%g
s%@GENCAT@%$GENCAT%g
s%@INTL_LIBTOOL_SUFFIX_PREFIX@%$INTL_LIBTOOL_SUFFIX_PREFIX%g
s%@INTLLIBS@%$INTLLIBS%g
s%@LIBINTL@%$LIBINTL%g
s%@LTLIBINTL@%$LTLIBINTL%g
s%@POSUB@%$POSUB%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@INSIDE_GNOME_COMMON_TRUE@%$INSIDE_GNOME_COMMON_TRUE%g
s%@INSIDE_GNOME_COMMON_FALSE@%$INSIDE_GNOME_COMMON_FALSE%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@LN_S@%$LN_S%g
s%@OBJEXT@%$OBJEXT%g
s%@EXEEXT@%$EXEEXT%g
s%@ECHO@%$ECHO%g
s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
s%@LIBTOOL_DEPS@%$LIBTOOL_DEPS%g
s%@GLIB_CONFIG@%$GLIB_CONFIG%g
s%@GLIB_CFLAGS@%$GLIB_CFLAGS%g
s%@GLIB_LIBS@%$GLIB_LIBS%g
s%@DL_LIB@%$DL_LIB%g
s%@QTTHREADS_LIB@%$QTTHREADS_LIB%g
s%@TERMCAP_LIB@%$TERMCAP_LIB%g
s%@READLINE_LIB@%$READLINE_LIB%g
s%@BUILD_GUILE@%$BUILD_GUILE%g
s%@GUILE_LIBS@%$GUILE_LIBS%g
s%@GUILE_INCS@%$GUILE_INCS%g
s%@GUILE_TRUE@%$GUILE_TRUE%g
s%@GUILE_FALSE@%$GUILE_FALSE%g
s%@GUILE@%$GUILE%g
s%@G_WRAP_CONFIG@%$G_WRAP_CONFIG%g
s%@G_WRAP_COMPILE_ARGS@%$G_WRAP_COMPILE_ARGS%g
s%@G_WRAP_LINK_ARGS@%$G_WRAP_LINK_ARGS%g
s%@G_WRAP_MODULE_DIR@%$G_WRAP_MODULE_DIR%g
s%@G_WRAP_LIB_DIR@%$G_WRAP_LIB_DIR%g
s%@GNC_ADD_ON_SRFIS@%$GNC_ADD_ON_SRFIS%g
s%@GNC_SRFI_LOAD_PATH@%$GNC_SRFI_LOAD_PATH%g
s%@GNC_TEST_SRFI_LOAD_CMD@%$GNC_TEST_SRFI_LOAD_CMD%g
s%@GNC_HAVE_GUILE_WWW_TRUE@%$GNC_HAVE_GUILE_WWW_TRUE%g
s%@GNC_HAVE_GUILE_WWW_FALSE@%$GNC_HAVE_GUILE_WWW_FALSE%g
s%@GNOME_CONFIG@%$GNOME_CONFIG%g
s%@GNOME_XML_CFLAGS@%$GNOME_XML_CFLAGS%g
s%@GNOME_XML_LIB@%$GNOME_XML_LIB%g
s%@GNC_ACCOUNTS_DIR@%$GNC_ACCOUNTS_DIR%g
s%@GNC_CONFIGDIR@%$GNC_CONFIGDIR%g
s%@GNC_DOC_INSTALL_DIR@%$GNC_DOC_INSTALL_DIR%g
s%@GNC_GLADE_DIR@%$GNC_GLADE_DIR%g
s%@GNC_GWRAP_LIBDIR@%$GNC_GWRAP_LIBDIR%g
s%@GNC_INCLUDE_DIR@%$GNC_INCLUDE_DIR%g
s%@GNC_LIBDIR@%$GNC_LIBDIR%g
s%@GNC_MODULE_DIR@%$GNC_MODULE_DIR%g
s%@GNC_PIXMAP_DIR@%$GNC_PIXMAP_DIR%g
s%@GNC_SCM_INSTALL_DIR@%$GNC_SCM_INSTALL_DIR%g
s%@GNC_SHAREDIR@%$GNC_SHAREDIR%g
s%@GNC_LIBEXECDIR@%$GNC_LIBEXECDIR%g
s%@PGSQL_CFLAGS@%$PGSQL_CFLAGS%g
s%@PGSQL_LIBS@%$PGSQL_LIBS%g
s%@SQL_DIR@%$SQL_DIR%g
s%@RPC_DIR@%$RPC_DIR%g
s%@LIBOFX_CFLAGS@%$LIBOFX_CFLAGS%g
s%@LIBOFX_LIBS@%$LIBOFX_LIBS%g
s%@OFX_DIR@%$OFX_DIR%g
s%@OPENHBCI_CFLAGS@%$OPENHBCI_CFLAGS%g
s%@OPENHBCI_LIBS@%$OPENHBCI_LIBS%g
s%@OPENHBCI_CXXFLAGS@%$OPENHBCI_CXXFLAGS%g
s%@HBCI_LIBS@%$HBCI_LIBS%g
s%@HBCI_CFLAGS@%$HBCI_CFLAGS%g
s%@HBCI_DIR@%$HBCI_DIR%g
s%@LOCALE_DIR@%$LOCALE_DIR%g
s%@GNC_HELPDIR@%$GNC_HELPDIR%g
s%@GNC_ETAGS_FILE@%$GNC_ETAGS_FILE%g
s%@GNC_ETAGS_FILE_TRUE@%$GNC_ETAGS_FILE_TRUE%g
s%@GNC_ETAGS_FILE_FALSE@%$GNC_ETAGS_FILE_FALSE%g
s%@GNC_CTAGS_FILE@%$GNC_CTAGS_FILE%g
s%@GNC_CTAGS_FILE_TRUE@%$GNC_CTAGS_FILE_TRUE%g
s%@GNC_CTAGS_FILE_FALSE@%$GNC_CTAGS_FILE_FALSE%g
s%@PERL@%$PERL%g
s%@PERLINCL@%$PERLINCL%g
s%@DOXYGEN@%$DOXYGEN%g
s%@DOT@%$DOT%g
s%@DOC_TRUE@%$DOC_TRUE%g
s%@DOC_FALSE@%$DOC_FALSE%g
s%@ENABLE_DOXYGEN_TRUE@%$ENABLE_DOXYGEN_TRUE%g
s%@ENABLE_DOXYGEN_FALSE@%$ENABLE_DOXYGEN_FALSE%g
s%@enable_dot@%$enable_dot%g
s%@enable_html_docs@%$enable_html_docs%g
s%@enable_latex_docs@%$enable_latex_docs%g
s%@DB_LIBS@%$DB_LIBS%g
s%@GNUCASH_ENABLE_GUI_TRUE@%$GNUCASH_ENABLE_GUI_TRUE%g
s%@GNUCASH_ENABLE_GUI_FALSE@%$GNUCASH_ENABLE_GUI_FALSE%g
s%@GNOME_LIBS@%$GNOME_LIBS%g
s%@GNOMEUI_LIBS@%$GNOMEUI_LIBS%g
s%@GNOMEGNORBA_LIBS@%$GNOMEGNORBA_LIBS%g
s%@GTKXMHTML_LIBS@%$GTKXMHTML_LIBS%g
s%@ZVT_LIBS@%$ZVT_LIBS%g
s%@GNOME_LIBDIR@%$GNOME_LIBDIR%g
s%@GNOME_INCLUDEDIR@%$GNOME_INCLUDEDIR%g
s%@ORBIT_CONFIG@%$ORBIT_CONFIG%g
s%@ORBIT_IDL@%$ORBIT_IDL%g
s%@HAVE_ORBIT_TRUE@%$HAVE_ORBIT_TRUE%g
s%@HAVE_ORBIT_FALSE@%$HAVE_ORBIT_FALSE%g
s%@ORBIT_CFLAGS@%$ORBIT_CFLAGS%g
s%@ORBIT_LIBS@%$ORBIT_LIBS%g
s%@HAVE_GNORBA_TRUE@%$HAVE_GNORBA_TRUE%g
s%@HAVE_GNORBA_FALSE@%$HAVE_GNORBA_FALSE%g
s%@GNORBA_CFLAGS@%$GNORBA_CFLAGS%g
s%@GNORBA_LIBS@%$GNORBA_LIBS%g
s%@GNOME_APPLETS_LIBS@%$GNOME_APPLETS_LIBS%g
s%@GNOME_DOCKLETS_LIBS@%$GNOME_DOCKLETS_LIBS%g
s%@GNOME_CAPPLET_LIBS@%$GNOME_CAPPLET_LIBS%g
s%@cflags_set@%$cflags_set%g
s%@GDK_PIXBUF_CONFIG@%$GDK_PIXBUF_CONFIG%g
s%@GDK_PIXBUF_CFLAGS@%$GDK_PIXBUF_CFLAGS%g
s%@GDK_PIXBUF_LIBS@%$GDK_PIXBUF_LIBS%g
s%@GNOME_PRINT_CFLAGS@%$GNOME_PRINT_CFLAGS%g
s%@GNOME_PRINT_LIBS@%$GNOME_PRINT_LIBS%g
s%@LIBGLADE_CONFIG@%$LIBGLADE_CONFIG%g
s%@LIBGLADE_CFLAGS@%$LIBGLADE_CFLAGS%g
s%@LIBGLADE_LIBS@%$LIBGLADE_LIBS%g
s%@GLADE_LIBS@%$GLADE_LIBS%g
s%@GLADE_CFLAGS@%$GLADE_CFLAGS%g
s%@PKG_CONFIG@%$PKG_CONFIG%g
s%@GTKHTML_LIBS@%$GTKHTML_LIBS%g
s%@GTKHTML_CFLAGS@%$GTKHTML_CFLAGS%g
s%@GHTTP_LIBS@%$GHTTP_LIBS%g
s%@GHTTP_CFLAGS@%$GHTTP_CFLAGS%g
s%@EFENCE_LIBS@%$EFENCE_LIBS%g
s%@LIBGUPPI_CFLAGS@%$LIBGUPPI_CFLAGS%g
s%@LIBGUPPI_LIBS@%$LIBGUPPI_LIBS%g
s%@GUPPI_LIBS@%$GUPPI_LIBS%g
s%@GUPPI_CFLAGS@%$GUPPI_CFLAGS%g
s%@GTK_XIM_FLAGS@%$GTK_XIM_FLAGS%g
s%@LIBOBJS@%$LIBOBJS%g
s%@LC_MESSAGES_ENUM@%$LC_MESSAGES_ENUM%g
s%@GNUCASH_ENGINE_BASE_LIBS@%$GNUCASH_ENGINE_BASE_LIBS%g
s%@GNUCASH_ENGINE_LIBS@%$GNUCASH_ENGINE_LIBS%g
s%@GNUCASH_ENGINE_BASE_CFLAGS@%$GNUCASH_ENGINE_BASE_CFLAGS%g
s%@GNUCASH_ENGINE_CFLAGS@%$GNUCASH_ENGINE_CFLAGS%g
s%@GNUCASH_APP_UTILS_CFLAGS@%$GNUCASH_APP_UTILS_CFLAGS%g
s%@GNUCASH_APP_UTILS_LIBS@%$GNUCASH_APP_UTILS_LIBS%g
s%@GNUCASH_NETWORK_UTILS_CFLAGS@%$GNUCASH_NETWORK_UTILS_CFLAGS%g
s%@GNUCASH_NETWORK_UTILS_LIBS@%$GNUCASH_NETWORK_UTILS_LIBS%g
s%@GNUCASH_GNOME_UTILS_CFLAGS@%$GNUCASH_GNOME_UTILS_CFLAGS%g
s%@GNUCASH_GNOME_UTILS_LIBS@%$GNUCASH_GNOME_UTILS_LIBS%g
s%@GNUCASH_REGISTER_CORE_CFLAGS@%$GNUCASH_REGISTER_CORE_CFLAGS%g
s%@GNUCASH_REGISTER_CORE_LIBS@%$GNUCASH_REGISTER_CORE_LIBS%g
s%@GNUCASH_SEPARATE_BUILDDIR_TRUE@%$GNUCASH_SEPARATE_BUILDDIR_TRUE%g
s%@GNUCASH_SEPARATE_BUILDDIR_FALSE@%$GNUCASH_SEPARATE_BUILDDIR_FALSE%g
s%@GNC_FALSE_TRUE@%$GNC_FALSE_TRUE%g
s%@GNC_FALSE_FALSE@%$GNC_FALSE_FALSE%g
s%@LIBOBJS_SEDSCRIPT@%$LIBOBJS_SEDSCRIPT%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"m4/Makefile  intl/Makefile po/Makefile.in intl/Makefile po/Makefile.in 
                    Makefile
          accounts/Makefile
          accounts/C/Makefile
          accounts/da/Makefile
          accounts/de_DE/Makefile
          accounts/el_GR/Makefile
          accounts/es_ES/Makefile
          accounts/fr_FR/Makefile
          accounts/pt_BR/Makefile
          accounts/pt_PT/Makefile
          accounts/sk/Makefile
          debian/Makefile
          doc/Makefile
          doc/examples/Makefile
          intl-scm/Makefile
          lib/Makefile
          lib/guile-www/Makefile
          lib/srfi/Makefile
	  lib/libc/Makefile
          macros/Makefile
          rpm/Makefile
          src/Makefile
          src/app-file/Makefile
          src/app-file/test/Makefile
          src/app-file/gnome/Makefile
          src/app-utils/Makefile
          src/app-utils/test/Makefile
          src/backend/Makefile
          src/backend/net/Makefile
          src/backend/file/Makefile
          src/backend/file/test/Makefile
          src/backend/file/test/test-files/Makefile
          src/backend/file/test/test-files/xml2/Makefile
          src/backend/postgres/Makefile
          src/backend/postgres/test/Makefile
          src/backend/rpc/Makefile
          src/bin/Makefile
          src/bin/overrides/Makefile
          src/bin/test/Makefile
          src/core-utils/Makefile
          src/calculation/Makefile 
          src/calculation/test/Makefile 
          src/doc/Makefile
          src/doc/design/Makefile
          src/doc/xml/Makefile
          src/engine/Makefile
          src/engine/test/Makefile
          src/engine/test-core/Makefile
          src/experimental/Makefile
          src/experimental/cbb/Makefile
          src/experimental/cbb/cbb-engine/Makefile
          src/experimental/cgi-bin/Makefile
          src/experimental/gg/Makefile
          src/gnc-module/Makefile
          src/gnc-module/test/Makefile
          src/gnc-module/test/mod-foo/Makefile
          src/gnc-module/test/mod-bar/Makefile
          src/gnc-module/test/mod-baz/Makefile
          src/gnc-module/test/misc-mods/Makefile
          src/gnome/Makefile
          src/gnome/glade/Makefile
          src/gnome-utils/Makefile
          src/gnome-utils/test/Makefile
          src/gnome-search/Makefile
          src/import-export/Makefile
          src/import-export/test/Makefile
          src/import-export/binary-import/Makefile
          src/import-export/binary-import/test/Makefile
          src/import-export/qif-import/Makefile
          src/import-export/qif-import/test/Makefile
          src/import-export/qif-io-core/Makefile
          src/import-export/qif-io-core/test/Makefile
          src/import-export/ofx/Makefile
          src/import-export/ofx/test/Makefile
          src/import-export/hbci/Makefile
          src/import-export/hbci/glade/Makefile
          src/import-export/hbci/test/Makefile
          src/network-utils/Makefile
          src/network-utils/test/Makefile
          src/optional/Makefile
          src/optional/swig/Makefile
          src/optional/swig/examples/Makefile
          src/pixmaps/Makefile
          src/quotes/Makefile
          src/register/Makefile
          src/register/ledger-core/Makefile
          src/register/ledger-core/test/Makefile
          src/register/register-core/Makefile
          src/register/register-core/test/Makefile
          src/register/register-gnome/Makefile
          src/register/register-gnome/test/Makefile
          src/report/Makefile
          src/report/report-gnome/Makefile
          src/report/report-gnome/test/Makefile
          src/report/report-system/Makefile
          src/report/report-system/test/Makefile
          src/report/standard-reports/Makefile
          src/report/standard-reports/test/Makefile
          src/report/locale-specific/Makefile
          src/report/locale-specific/us/Makefile
          src/report/locale-specific/us/test/Makefile
          src/report/stylesheets/Makefile
          src/report/stylesheets/test/Makefile
          src/report/utility-reports/Makefile
          src/report/utility-reports/test/Makefile
          src/scm/Makefile
          src/scm/gnumeric/Makefile
          src/scm/printing/Makefile
          src/tax/Makefile
          src/tax/us/Makefile
          src/tax/us/test/Makefile
          src/test-core/Makefile
          src/business/Makefile
          src/business/business-core/Makefile
          src/business/business-core/test/Makefile
          src/business/business-core/file/Makefile
          src/business/business-utils/Makefile
          src/business/dialog-tax-table/Makefile
          src/business/business-gnome/Makefile
          src/business/business-gnome/glade/Makefile
          src/business/business-ledger/Makefile
          src/business/business-reports/Makefile

                    
                              gnucash-config
          "}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
  CONFIG_HEADERS="config.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  cat $ac_file_inputs > conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    # Remove last slash and all that follows it.  Not all systems have dirname.
      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
      # The file is in a subdirectory.
      test ! -d "$ac_dir" && mkdir "$ac_dir"
    fi
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done

EOF
cat >> $CONFIG_STATUS <<EOF

      
      mv -f po/POTFILES po/POTFILES.tmp
      sed -e 's/\[.*\] *//' < po/POTFILES.tmp > po/POTFILES
      rm -f po/POTFILES.tmp
      
  INTLTOOL_PERL=${INTLTOOL_PERL}

# Capture the value of obsolete $ALL_LINGUAS because we need it to compute
    # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it
    # from automake.
    eval 'ALL_LINGUAS''="$ALL_LINGUAS"'
    # Capture the value of LINGUAS because we need it to compute CATALOGS.
    LINGUAS="${LINGUAS-%UNSET%}"
   

EOF
cat >> $CONFIG_STATUS <<\EOF


sed -e "s:@INTLTOOL_PERL@:${INTLTOOL_PERL}:;" < ${srcdir}/intltool-extract.in > intltool-extract.out
if cmp -s intltool-extract intltool-extract.out 2>/dev/null; then
  rm -f intltool-extract.out
else
  mv -f intltool-extract.out intltool-extract
fi
chmod ugo+x intltool-extract
chmod u+w intltool-extract

sed -e "s:@INTLTOOL_PERL@:${INTLTOOL_PERL}:;" < ${srcdir}/intltool-merge.in > intltool-merge.out
if cmp -s intltool-merge intltool-merge.out 2>/dev/null; then
  rm -f intltool-merge.out
else
  mv -f intltool-merge.out intltool-merge
fi
chmod ugo+x intltool-merge
chmod u+w intltool-merge

sed -e "s:@INTLTOOL_PERL@:${INTLTOOL_PERL}:;" < ${srcdir}/intltool-update.in > intltool-update.out
if cmp -s intltool-update intltool-update.out 2>/dev/null; then
  rm -f intltool-update.out
else
  mv -f intltool-update.out intltool-update
fi
chmod ugo+x intltool-update
chmod u+w intltool-update


test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h

    for ac_file in $CONFIG_FILES; do
      # Support "outfile[:infile[:infile...]]"
      case "$ac_file" in
        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
      esac
      # PO directories have a Makefile.in generated from Makefile.in.in.
      case "$ac_file" in */Makefile.in)
        # Adjust a relative srcdir.
        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
        ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
        # In autoconf-2.13 it is called $ac_given_srcdir.
        # In autoconf-2.50 it is called $srcdir.
        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
        case "$ac_given_srcdir" in
          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
          /*) top_srcdir="$ac_given_srcdir" ;;
          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
        esac
        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
          rm -f "$ac_dir/POTFILES"
          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ 	]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
          # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend
          # on $ac_dir but don't depend on user-specified configuration
          # parameters.
          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
            # The LINGUAS file contains the set of available languages.
            if test -n "$ALL_LINGUAS"; then
              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
            fi
            ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
            # Hide the ALL_LINGUAS assigment from automake.
            eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
          fi
          case "$ac_given_srcdir" in
            .) srcdirpre= ;;
            *) srcdirpre='$(srcdir)/' ;;
          esac
          POFILES=
          GMOFILES=
          UPDATEPOFILES=
          DUMMYPOFILES=
          for lang in $ALL_LINGUAS; do
            POFILES="$POFILES $srcdirpre$lang.po"
            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
          done
          # CATALOGS depends on both $ac_dir and the user's LINGUAS
          # environment variable.
          INST_LINGUAS=
          if test -n "$ALL_LINGUAS"; then
            for presentlang in $ALL_LINGUAS; do
              useit=no
              if test "%UNSET%" != "$LINGUAS"; then
                desiredlanguages="$LINGUAS"
              else
                desiredlanguages="$ALL_LINGUAS"
              fi
              for desiredlang in $desiredlanguages; do
                # Use the presentlang catalog if desiredlang is
                #   a. equal to presentlang, or
                #   b. a variant of presentlang (because in this case,
                #      presentlang can be used as a fallback for messages
                #      which are not translated in the desiredlang catalog).
                case "$desiredlang" in
                  "$presentlang"*) useit=yes;;
                esac
              done
              if test $useit = yes; then
                INST_LINGUAS="$INST_LINGUAS $presentlang"
              fi
            done
          fi
          CATALOGS=
          if test -n "$INST_LINGUAS"; then
            for lang in $INST_LINGUAS; do
              CATALOGS="$CATALOGS $lang.gmo"
            done
          fi
          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
            if test -f "$f"; then
              case "$f" in
                *.orig | *.bak | *~) ;;
                *) cat "$f" >> "$ac_dir/Makefile" ;;
              esac
            fi
          done
        fi
        ;;
      esac
    done
          
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1


if test x$RPC_DIR = xrpc ; then
       echo "configure: warning: 

       The RPC Backend is depricated.  You should not use it.
       It may go away in the future.  If you need it, please
       contact gnucash-devel@gnucash.org and let the developers
       know.
       " 1>&2
fi
