Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-3.fc14.x86_64 (mockbuild@x86-10.phx2.fedoraproject.org) (gcc version 4.5.0 20100716 (Red Hat 4.5.0-3) (GCC) ) #1 SMP Fri Aug 6 19:41:28 UTC 2010
Command line: ro root=/dev/VolGroup00/systeme SYSFONT=latarcyrheb-sun16 LANG=fr_FR.UTF-8 KEYTABLE=fr-latin9 rd_plytheme=charge rhgb quiet
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfeb0000 (usable)
 BIOS-e820: 00000000cfeb0000 - 00000000cfee3000 (ACPI NVS)
 BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
 BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CEFFF write-protect
  CF000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 0E0000000 mask FE0000000 uncachable
  2 base 0D0000000 mask FF0000000 uncachable
  3 base 100000000 mask FC0000000 write-back
  4 base 130000000 mask FF0000000 uncachable
  5 base 0CFF00000 mask FFFF00000 uncachable
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 3328MB, range: 256MB, type UC
reg 3, base: 4GB, range: 1GB, type WB
reg 4, base: 4864MB, range: 256MB, type UC
reg 5, base: 3327MB, range: 1MB, type UC
total RAM covered: 4095M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 2M 	num_reg: 6  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 256MB, type WB
e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfeb0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f59c0] f59c0
init_memory_mapping: 0000000000000000-00000000cfeb0000
 0000000000 - 00cfe00000 page 2M
 00cfe00000 - 00cfeb0000 page 4k
kernel direct mapping tables up to cfeb0000 @ 8000-e000
init_memory_mapping: 0000000100000000-0000000130000000
 0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ c000-12000
RAMDISK: 37312000 - 37ff0000
ACPI: RSDP 00000000000f77f0 00014 (v00 GBT   )
ACPI: RSDT 00000000cfee3040 00048 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfee3180 04C52 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000cfeb0000 00040
ACPI: HPET 00000000cfee7f40 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfee7fc0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfee7e40 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000cfee86e0 0018A (v01  PmRef  Cpu0Cst 00003001 INTL 20040311)
ACPI: SSDT 00000000cfee8870 0018A (v01  PmRef  Cpu1Cst 00003001 INTL 20040311)
ACPI: SSDT 00000000cfee8a00 0018A (v01  PmRef  Cpu2Cst 00003001 INTL 20040311)
ACPI: SSDT 00000000cfee8b90 0018A (v01  PmRef  Cpu3Cst 00003001 INTL 20040311)
ACPI: SSDT 00000000cfee8d20 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Initmem setup node 0 0000000000000000-0000000130000000
  NODE_DATA [0000000100000000 - 0000000100014fff]
  bootmap [0000000100015000 -  000000010003afff] pages 26
(14/32 early reservations) ==> bootmem [0000000000 - 0130000000]
  #0 [0001000000 - 0002a388c0]    TEXT DATA BSS ==> [0001000000 - 0002a388c0]
  #1 [0037312000 - 0037ff0000]          RAMDISK ==> [0037312000 - 0037ff0000]
  #2 [0002a39000 - 0002a390f6]              BRK ==> [0002a39000 - 0002a390f6]
  #3 [00000f59d0 - 0000100000]    BIOS reserved ==> [00000f59d0 - 0000100000]
  #4 [00000f59c0 - 00000f59d0]     MP-table mpf ==> [00000f59c0 - 00000f59d0]
  #5 [000009e800 - 00000f0d00]    BIOS reserved ==> [000009e800 - 00000f0d00]
  #6 [00000f0eb4 - 00000f59c0]    BIOS reserved ==> [00000f0eb4 - 00000f59c0]
  #7 [00000f0d00 - 00000f0eb4]     MP-table mpc ==> [00000f0d00 - 00000f0eb4]
  #8 [0000001000 - 0000003000]       TRAMPOLINE ==> [0000001000 - 0000003000]
  #9 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
  #10 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
  #11 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 000000d000]
  #12 [0100000000 - 0100015000]        NODE_DATA ==> [0100000000 - 0100015000]
  #13 [0100015000 - 010003b000]          BOOTMAP ==> [0100015000 - 010003b000]
 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880100600000-ffff880103ffffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x0000009e
    0: 0x00000100 -> 0x000cfeb0
    0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048141
  DMA zone: 56 pages used for memmap
  DMA zone: 107 pages reserved
  DMA zone: 3834 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 833256 pages, LIFO batch:31
  Normal zone: 2688 pages used for memmap
  Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfeb0000 - 00000000cfee3000
PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 478 pages/cpu @ffff880002c00000 s1927360 r8192 d22336 u2097152
pcpu-alloc: s1927360 r8192 d22336 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031010
Policy zone: Normal
Kernel command line: ro root=/dev/VolGroup00/systeme SYSFONT=latarcyrheb-sun16 LANG=fr_FR.UTF-8 KEYTABLE=fr-latin9 rd_plytheme=charge rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4018376k/4980736k available (4740k kernel code, 788172k absent, 174188k reserved, 7161k data, 2756k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU lockdep checking is enabled.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:33024 nr_irqs:712
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
 memory used by lock dependency info: 6367 kB
 per task-struct memory footprint: 2688 bytes
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
ODEBUG: 13 of 13 active objects replaced
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3166.804 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6333.60 BogoMIPS (lpj=3166804)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20100428
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 23948 entries in 94 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     E8500  @ 3.16GHz stepping 0a
lockdep: fixing up alternatives.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
kernel/sched.c:616 invoked rcu_dereference_check() without protection!

other info that might help us debug this:


rcu_scheduler_active = 1, debug_locks = 0
3 locks held by swapper/1:
 #0:  (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff81052b4b>] cpu_maps_update_begin+0x17/0x19
 #1:  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81052a5e>] cpu_hotplug_begin+0x2c/0x53
 #2:  (&rq->lock){-.....}, at: [<ffffffff81491989>] init_idle+0x30/0x131

stack backtrace:
Pid: 1, comm: swapper Not tainted 2.6.35-3.fc14.x86_64 #1
Call Trace:
 [<ffffffff8107bc62>] lockdep_rcu_dereference+0xaa/0xb3
 [<ffffffff8103fda5>] task_group+0x80/0x8f
 [<ffffffff8103fdcb>] set_task_rq+0x17/0x73
 [<ffffffff81491a43>] init_idle+0xea/0x131
 [<ffffffff81491e13>] fork_idle+0x92/0xa3
 [<ffffffff8107e748>] ? mark_held_locks+0x50/0x72
 [<ffffffff8148f8b9>] do_fork_idle+0x1c/0x2d
 [<ffffffff8148fa01>] do_boot_cpu+0x137/0x9ac
 [<ffffffff8148f89d>] ? do_fork_idle+0x0/0x2d
 [<ffffffff81490a9a>] native_cpu_up+0x100/0x1c2
 [<ffffffff81491eec>] _cpu_up+0x9d/0xf9
 [<ffffffff8149201b>] cpu_up+0xd3/0xe5
 [<ffffffff81d78d86>] kernel_init+0x105/0x2c9
 [<ffffffff8100aae4>] kernel_thread_helper+0x4/0x10
 [<ffffffff814991d0>] ? restore_args+0x0/0x30
 [<ffffffff81d78c81>] ? kernel_init+0x0/0x2c9
 [<ffffffff8100aae0>] ? kernel_thread_helper+0x0/0x10
Booting Node   0, Processors  #1
Brought up 2 CPUs
Total of 2 processors activated (12665.97 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=1168 bytes
sizeof(dentry)=256 bytes
sizeof(ext3inode)=1600 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=240 bytes
sizeof(task_struct)=9216 bytes
devtmpfs: initialized
atomic64 test passed for x86-64 platform with CX8 and with SSE
Time: 11:23:29  Date: 08/07/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 00000000cfee80c0 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 00000000cfee8580 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff88012b68db60), AE_ALREADY_EXISTS
ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0xe500-0xe51f]
pci 0000:00:1a.1: reg 20: [io  0xe000-0xe01f]
pci 0000:00:1a.2: reg 20: [io  0xe100-0xe11f]
pci 0000:00:1a.7: reg 10: [mem 0xec400000-0xec4003ff]
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xe200-0xe21f]
pci 0000:00:1d.1: reg 20: [io  0xe300-0xe31f]
pci 0000:00:1d.2: reg 20: [io  0xe400-0xe41f]
pci 0000:00:1d.7: reg 10: [mem 0xec401000-0xec4013ff]
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
pci 0000:00:1f.2: reg 10: [io  0xe600-0xe607]
pci 0000:00:1f.2: reg 14: [io  0xe700-0xe703]
pci 0000:00:1f.2: reg 18: [io  0xe800-0xe807]
pci 0000:00:1f.2: reg 1c: [io  0xe900-0xe903]
pci 0000:00:1f.2: reg 20: [io  0xea00-0xea1f]
pci 0000:00:1f.2: reg 24: [mem 0xec402000-0xec4027ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xec403000-0xec4030ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xeb000000-0xeb00ffff 64bit]
pci 0000:01:00.0: reg 20: [io  0x9000-0x90ff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xeb010000-0xeb013fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:01.0:   bridge window [mem 0xea000000-0xebffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 24: [mem 0xec000000-0xec001fff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10: [io  0xa000-0xa007]
pci 0000:03:00.1: reg 14: [io  0xa100-0xa103]
pci 0000:03:00.1: reg 18: [io  0xa200-0xa207]
pci 0000:03:00.1: reg 1c: [io  0xa300-0xa303]
pci 0000:03:00.1: reg 20: [io  0xa400-0xa40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem 0xec000000-0xec0fffff]
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [io  0xb000-0xb0ff]
pci 0000:04:00.0: reg 18: [mem 0xec310000-0xec310fff 64bit pref]
pci 0000:04:00.0: reg 20: [mem 0xec300000-0xec30ffff 64bit pref]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.4:   bridge window [mem 0xe8000000-0xe8ffffff]
pci 0000:00:1c.4:   bridge window [mem 0xec300000-0xec3fffff 64bit pref]
pci 0000:05:00.0: reg 10: [io  0xc000-0xc0ff]
pci 0000:05:00.0: reg 18: [mem 0xec110000-0xec110fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xec100000-0xec10ffff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 05-05]
pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.5:   bridge window [mem 0xe9000000-0xe9ffffff]
pci 0000:00:1c.5:   bridge window [mem 0xec100000-0xec1fffff 64bit pref]
pci 0000:06:00.0: reg 10: [io  0xd000-0xd01f]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.2: reg 10: [mem 0xec204000-0xec2047ff]
pci 0000:06:00.2: reg 14: [mem 0xec200000-0xec203fff]
pci 0000:06:00.2: supports D1 D2
pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot
pci 0000:06:00.2: PME# disabled
pci 0000:06:01.0: reg 10: [mem 0xe4000000-0xe7ffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xec200000-0xec2fffff]
pci 0000:00:1e.0:   bridge window [mem 0xe4000000-0xe7ffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009e800 - 000000000009ffff 
reserve RAM buffer: 00000000cfeb0000 - 00000000cfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: [io  0x0800-0x0805] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: [io  0x0880-0x088f] has been reserved
system 00:01: [io  0x04c0-0x04ff] could not be reserved
system 00:07: [io  0x0400-0x04bf] could not be reserved
system 00:08: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:09: [mem 0x000d2000-0x000d3fff] has been reserved
system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:09: [mem 0xcfeb0000-0xcfefffff] could not be reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0xcfeaffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:09: [mem 0xfed20000-0xfed8ffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:09: [mem 0x000e0000-0x000effff] has been reserved
pci 0000:00:1c.0: BAR 14: assigned [mem 0xec500000-0xec6fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xec700000-0xec8fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xec900000-0xecafffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xea000000-0xea01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:01.0:   bridge window [mem 0xea000000-0xebffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xec500000-0xec6fffff]
pci 0000:00:1c.0:   bridge window [mem 0xec700000-0xec8fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem 0xec000000-0xec0fffff]
pci 0000:00:1c.3:   bridge window [mem 0xec900000-0xecafffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xec320000-0xec32ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.4:   bridge window [mem 0xe8000000-0xe8ffffff]
pci 0000:00:1c.4:   bridge window [mem 0xec300000-0xec3fffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xec120000-0xec12ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 05-05]
pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.5:   bridge window [mem 0xe9000000-0xe9ffffff]
pci 0000:00:1c.5:   bridge window [mem 0xec100000-0xec1fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 06-06]
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xec200000-0xec2fffff]
pci 0000:00:1e.0:   bridge window [mem 0xe4000000-0xe7ffffff 64bit pref]
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xea000000-0xebffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xec500000-0xec6fffff]
pci_bus 0000:02: resource 2 [mem 0xec700000-0xec8fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xec000000-0xec0fffff]
pci_bus 0000:03: resource 2 [mem 0xec900000-0xecafffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe8ffffff]
pci_bus 0000:04: resource 2 [mem 0xec300000-0xec3fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xe9000000-0xe9ffffff]
pci_bus 0000:05: resource 2 [mem 0xec100000-0xec1fffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xec200000-0xec2fffff]
pci_bus 0000:06: resource 2 [mem 0xe4000000-0xe7ffffff 64bit pref]
pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:06: resource 9 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 6, 327680 bytes)
UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13176k freed
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800033de000 - ffff8800073de000
software IO TLB at phys 0x33de000 - 0x73de000
audit: initializing netlink socket (disabled)
type=2000 audit(1281180209.678:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7874
SELinux:  Registering netfilter hooks
cryptomgr_test used greatest stack depth: 5856 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 40 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 41 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
  alloc irq_desc for 42 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
  alloc irq_desc for 43 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
  alloc irq_desc for 44 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
ERST: Table is not found!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  alloc irq_desc for 45 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xec402000 port 0xec402100 irq 45
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 45
ata3: SATA max UDMA/133 abar m2048@0xec402000 port 0xec402200 irq 45
ata4: SATA max UDMA/133 abar m2048@0xec402000 port 0xec402280 irq 45
ata5: SATA max UDMA/133 abar m2048@0xec402000 port 0xec402300 irq 45
ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 45
ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:03:00.0: online status unreliable, applying workaround
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
ahci 0000:03:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xec000000 port 0xec000100 irq 19
ata8: SATA max UDMA/133 abar m8192@0xec000000 port 0xec000180 irq 19
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xec400000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-3.fc14.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xec401000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35-3.fc14.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e500
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35-3.fc14.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.35-3.fc14.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.35-3.fc14.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.35-3.fc14.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.35-3.fc14.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.35-3.fc14.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
usb 1-1: new high speed USB device using ehci_hcd and address 2
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
  Magic number: 6:525:377
rtc_cmos 00:04: setting system clock to 2010-08-07 11:23:30 UTC (1281180210)
Initalizing network drop monitor service
usb 1-1: New USB device found, idVendor=04cc, idProduct=1520
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: HPA detected: current 586112591, native 586114704
ata1.00: ATA-7: Maxtor 6L300S0, BANC1G10, max UDMA/133
ata1.00: 586112591 sectors, multi 0: LBA48 NCQ (not used)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L300S0   BANC PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 586112591 512-byte logical blocks: (300 GB/279 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 8-1: new low speed USB device using uhci_hcd and address 2
usb 8-1: New USB device found, idVendor=045e, idProduct=00db
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: Natural® Ergonomic Keyboard 4000
usb 8-1: Manufacturer: Microsoft
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input2
microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.2-1/input0
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input3
microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.2-1/input1
usb 1-1.1: new low speed USB device using ehci_hcd and address 3
usb 1-1.1: New USB device found, idVendor=045e, idProduct=0024
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: Microsoft Trackball Explorer®
usb 1-1.1: Manufacturer: Microsoft
input: Microsoft Microsoft Trackball Explorer® as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
generic-usb 0003:045E:0024.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Explorer®] on usb-0000:00:1a.7-1.1/input0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: Maxtor 6L300S0, BANC1G10, max UDMA/133
ata2.00: 586114704 sectors, multi 0: LBA48 NCQ (not used)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6L300S0   BANC PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 586114704 512-byte logical blocks: (300 GB/279 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
async/1 used greatest stack depth: 4600 bytes left
async/0 used greatest stack depth: 4520 bytes left
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: PLEXTOR DVDR   PX-716A, 1.11, max UDMA/66
ata6.00: applying bridge limits
ata6.00: configured for UDMA/66
scsi 5:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-716A   1.11 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg2 type 5
ata7: link is slow to respond, please be patient (ready=0)
ata8: link is slow to respond, please be patient (ready=0)
ata7: device not ready, treating as offline
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8: device not ready, treating as offline
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Freeing unused kernel memory: 2756k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1384k freed
Freeing unused kernel memory: 1716k freed
dracut: dracut-006-2.fc14
udev: starting version 160
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV770 0x1002:0x9442).
[drm] register mmio base: 0xEB000000
[drm] register mmio size: 65536
ATOM BIOS: Wekiva
[drm] Clocks initialized !
radeon 0000:01:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone  kernel: Available graphics memory: 2018704 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
  alloc irq_desc for 46 on node -1
  alloc kstat_irqs on node -1
radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[drm] radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV770 Microcode
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm] Default TV standard: PAL
[drm] Default TV standard: PAL
[drm] Default TV standard: PAL
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-I
[drm]   HPD1
[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm]   DIN
[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm]   DVI-I
[drm]   HPD2
[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 7258112
[drm] fb depth is 24
[drm]    pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
modprobe used greatest stack depth: 3680 bytes left
dracut: Starting plymouth daemon
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi8 : pata_jmicron
firewire_ohci 0000:06:00.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xa000 ctl 0xa100 bmdma 0xa400 irq 16
ata10: PATA max UDMA/100 cmd 0xa200 ctl 0xa300 bmdma 0xa408 irq 16
firewire_ohci: Added fw-ohci device 0000:06:00.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x0
ata9.00: HPA detected: current 160084415, native 160086528
ata9.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
ata9.00: 160084415 sectors, multi 16: LBA 
ata9.00: configured for UDMA/100
scsi 8:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:0: [sdc] 160084415 512-byte logical blocks: (81.9 GB/76.3 GiB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI disk
firewire_core: created device fw0: GUID 00023c012100510f, S400
dracut: Autoassembling MD Raid
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
md: raid1 personality registered for level 1
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 2146697216
dracut: mdadm: /dev/md0 has been started with 2 drives.
md0: detected capacity change from 0 to 2146697216
 md0: unknown partition table
md: md1 stopped.
md: bind<sdb3>
md: bind<sda3>
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 295789199360
dracut: mdadm: /dev/md1 has been started with 2 drives.
md1: detected capacity change from 0 to 295789199360
 md1: unknown partition table
dracut: Scanning devices md1  for LVM volume groups 
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "VolGroup00" using metadata type lvm2
dracut: 2 logical volume(s) in volume group "VolGroup00" now active
EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
EXT4-fs (dm-1): write access will be enabled during recovery
EXT4-fs (dm-1): recovery complete
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/VolGroup00-systeme
dracut: Loading SELinux policy
type=1404 audit(1281180231.041:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 200241 rules.
SELinux: 2048 avtab hash slots, 200241 rules.
SELinux:  9 users, 13 roles, 3365 types, 170 bools, 1 sens, 1024 cats
SELinux:  77 classes, 200241 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev dm-1, type ext4), uses xattr
type=1403 audit(1281180231.944:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
init[1]: Succesfully opened /dev/kmsg for logging.
init[1]: systemd 6 running in system mode.
init[1]: Your kernel apparently lacks built-in autofs4 support. Please fix that. We'll now try to work around this by calling '/sbin/modprobe autofs4'...
init[1]: Your kernel apparently lacks built-in ipv6 support. Please fix that. We'll now try to work around this by calling '/sbin/modprobe ipv6'...
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
init[1]: Set hostname to <arekh.okg>.
init[1]: Failed to load configuration for dhcpd6.service: File exists
init[1]: Failed to load configuration for distcache.service: No such file or directory
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
udev: starting version 160
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: unable to reset NO_REBOOT flag, platform may have disabled it
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
input: PC Speaker as /devices/platform/pcspkr/input/input5
Linux video capture interface: v2.00
ivtv: Start initialization, version 1.4.1
ivtv0: Initializing card 0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ivtv 0000:06:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 3-0050: The eeprom says no radio is present, but the tuner type
tveeprom 3-0050: indicates otherwise. I will assume that radio is present.
tveeprom 3-0050: Hauppauge model 26039, rev C1A5, serial# 8203263
tveeprom 3-0050: tuner model is TCL MPE05-2 (idx 105, type 38)
tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 3-0050: audio processor is CX25842 (idx 36)
tveeprom 3-0050: decoder processor is CX25842 (idx 29)
tveeprom 3-0050: has radio, has IR receiver, has IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
ivtv0: Reopen i2c bus for IR-blaster support
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:04:00.0: setting latency timer to 64
  alloc irq_desc for 47 on node -1
  alloc kstat_irqs on node -1
r8169 0000:04:00.0: irq 47 for MSI/MSI-X
r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc900054ac000, 00:1f:d0:20:5f:9f, XID 1c4000c0 IRQ 47
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:05:00.0: setting latency timer to 64
  alloc irq_desc for 48 on node -1
  alloc kstat_irqs on node -1
r8169 0000:05:00.0: irq 48 for MSI/MSI-X
r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xffffc900055c4000, 00:1f:d0:20:5f:9d, XID 1c4000c0 IRQ 48
cx25840 3-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
type=1400 audit(1281180237.381:4): avc:  denied  { mmap_zero } for  pid=599 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 3-0043: creating new instance
tda9887 3-0043: tda988[5/6/7] found
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0)
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  alloc irq_desc for 49 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:01:00.1: irq 49 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner-simple 3-0061: creating new instance
tuner-simple 3-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized card: Hauppauge WinTV PVR-150
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
EMU10K1_Audigy 0000:06:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ALSA sound/pci/emu10k1/emu10k1_main.c:811: emu1010: Special config.
ALSA sound/pci/emu10k1/emu10k1_main.c:850: emu1010: EMU_HANA_ID = 0x7f
ALSA sound/pci/emu10k1/emu10k1_main.c:869: emu1010: filename emu/hana.fw testing
ivtv: End initialization
ALSA sound/pci/emu10k1/emu10k1_main.c:674: firmware size = 0x133a4
ALSA sound/pci/emu10k1/emu10k1_main.c:886: emu1010: Hana Firmware loaded
ALSA sound/pci/emu10k1/emu10k1_main.c:889: emu1010: Hana version: 3.4
ALSA sound/pci/emu10k1/emu10k1_main.c:894: emu1010: Card options = 0x0
ALSA sound/pci/emu10k1/emu10k1_main.c:896: emu1010: Card options = 0x0
ALSA sound/pci/emu10k1/emu10k1_main.c:935: emu1010: Card options3 = 0x0
ALSA sound/pci/emu10k1/emufx.c:1542: EMU outputs on
ALSA sound/pci/emu10k1/emufx.c:1598: EMU inputs on
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
EXT4-fs (dm-1): re-mounted. Opts: (null)
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md0): using internal journal
EXT3-fs (md0): mounted filesystem with ordered data mode
SELinux: initialized (dev md0, type ext3), uses xattr
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-0, type ext4), uses xattr
Adding 2096476k swap on /dev/sda2.  Priority:-1 extents:1 across:2096476k 
Adding 2096476k swap on /dev/sdb2.  Priority:-2 extents:1 across:2096476k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
init[1]: systemd-initctl.socket failed to listen on sockets: No such file or directory
init[1]: Unit systemd-initctl.socket entered maintenance state.
ip6_tables: (C) 2000-2006 Netfilter Core Team
init[1]: Successfully connected to system D-Bus bus c8498c80520560ca877aac4400000031 as :1.1
r8169 0000:04:00.0: eth0: link up
r8169 0000:04:00.0: eth0: link up
r8169 0000:05:00.0: eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
init[1]: Succesfully opened syslog for logging.
init[1]: mdmonitor.service: control process exited, code=exited status=6
init[1]: Unit mdmonitor.service entered maintenance state.
it87: Found IT8720F chip at 0x290, revision 5
it87: VID is disabled (pins used for GPIO)
it87: Routing internal VCCH to in7
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
it87: Beeping is supported
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
gsettings-data-[2502] trap int3 ip:7f3a0af3e249 sp:7fff7168d910 error:0
fuse init (API version 7.14)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
