[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-18-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu4) ) #27-Ubuntu SMP Fri Mar 26 19:51:10 UTC 2010 (Ubuntu 2.6.32-18.27-generic 2.6.32.10+drm33.1)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000037e80000 (usable)
[    0.000000]  BIOS-e820: 0000000037e80000 - 0000000037e8b000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000037e8b000 - 0000000037f00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x37e80 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CCFFF write-protect
[    0.000000]   CD000-DEFFF uncachable
[    0.000000]   DF000-DFFFF write-protect
[    0.000000]   E0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0038000000 mask FFF8000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009dc00 (usable)
[    0.000000]  modified: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000ce000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 0000000037e80000 (usable)
[    0.000000]  modified: 0000000037e80000 - 0000000037e8b000 (ACPI data)
[    0.000000]  modified: 0000000037e8b000 - 0000000037f00000 (ACPI NVS)
[    0.000000]  modified: 0000000037f00000 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 297a9000 - 29f1ff5b
[    0.000000] ACPI: RSDP 000f8780 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 37e85ea3 0004C (v01 NEC    ND000141 00000000  LTP 00000000)
[    0.000000] ACPI: SLIC 37e8ac41 00176 (v01 NEC    ND000141 00000001 LOHR 00000000)
[    0.000000] ACPI: FACP 37e8adb7 000F4 (v03 NEC    ND000141 00000001 PTL  000F4240)
[    0.000000] ACPI: DSDT 37e85eef 04CDE (v02    NEC ND000141 00000001 MSFT 03000000)
[    0.000000] ACPI: FACS 37e8bfc0 00040
[    0.000000] ACPI: SSDT 37e8aeab 000D3 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: APIC 37e8af7e 00046 (v01 PTLTD  ? APIC   00000000  LTP 00000000)
[    0.000000] ACPI: MCFG 37e8afc4 0003C (v01 PTLTD    MCFG   00000000  LTP 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 6MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d7e98]    TEXT DATA BSS ==> [0000100000 - 00008d7e98]
[    0.000000]   #4 [00297a9000 - 0029f1ff5b]          RAMDISK ==> [00297a9000 - 0029f1ff5b]
[    0.000000]   #5 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
[    0.000000]   #6 [00008d8000 - 00008db22c]              BRK ==> [00008d8000 - 00008db22c]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00f8830] f8830
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x00037e80
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x00037e80
[    0.000000] On node 0 totalpages: 228889
[    0.000000] free_area_init_node: node 0, pgdat c0796720, node_mem_map c1001000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3961 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 14 pages used for memmap
[    0.000000]   HighMem zone: 1652 pages, LIFO batch:0
[    0.000000] Using APIC driver default
[    0.000000] SB4X0 revision 0x83
[    0.000000] Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[    0.000000] PM: Registered nosave memory: 00000000000ce000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s35992 r0 d21352 u4194304
[    0.000000] pcpu-alloc: s35992 r0 d21352 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227099
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-18-generic root=UUID=b3f9b3f2-a0c7-49c1-ae50-f849a02fd52e ro quiet splash i8042.nomux=1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4579840 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:00037e80)
[    0.000000] Memory: 887004k/915968k available (4671k kernel code, 28236k reserved, 2116k data, 656k init, 6664k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a1000 - 0xc0845000   ( 656 kB)
[    0.000000]       .data : 0xc058fde3 - 0xc07a0e48   (2116 kB)
[    0.000000]       .text : 0xc0100000 - 0xc058fde3   (4671 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1596.121 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.24 BogoMIPS (lpj=6384484)
[    0.004024] Security Framework initialized
[    0.004047] AppArmor: AppArmor initialized
[    0.004055] Mount-cache hash table entries: 512
[    0.004177] Initializing cgroup subsys ns
[    0.004182] Initializing cgroup subsys cpuacct
[    0.004187] Initializing cgroup subsys memory
[    0.004196] Initializing cgroup subsys devices
[    0.004200] Initializing cgroup subsys freezer
[    0.004203] Initializing cgroup subsys net_cls
[    0.004221] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004225] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004229] mce: CPU supports 5 MCE banks
[    0.004239] using C1E aware idle routine
[    0.004246] Performance Events: AMD PMU driver.
[    0.004254] ... version:                0
[    0.004256] ... bit width:              48
[    0.004259] ... generic registers:      4
[    0.004261] ... value mask:             0000ffffffffffff
[    0.004264] ... max period:             00007fffffffffff
[    0.004267] ... fixed-purpose events:   0
[    0.004270] ... event mask:             000000000000000f
[    0.004274] Checking 'hlt' instruction... OK.
[    0.020729] SMP alternatives: switching to UP code
[    0.028062] Freeing SMP alternatives: 19k freed
[    0.028081] ACPI: Core revision 20090903
[    0.036012] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.036019] ftrace: allocating 21765 entries in 43 pages
[    0.040436] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.081261] CPU0: Mobile AMD Sempron(tm) Processor 3200+ stepping 02
[    0.084001] Brought up 1 CPUs
[    0.084001] Total of 1 processors activated (3192.24 BogoMIPS).
[    0.084001] CPU0 attaching NULL sched-domain.
[    0.084001] devtmpfs: initialized
[    0.084001] regulator: core version 0.5
[    0.084001] Time: 15:12:39  Date: 04/01/10
[    0.084001] NET: Registered protocol family 16
[    0.084001] EISA bus registered
[    0.084001] ACPI: bus type pci registered
[    0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7
[    0.084001] PCI: MCFG area at e0000000 reserved in E820
[    0.084001] PCI: Using MMCONFIG for extended config space
[    0.084001] PCI: Using configuration type 1 for base access
[    0.084001] bio: create slab <bio-0> at 0
[    0.084001] ACPI: EC: Look up EC in DSDT
[    0.086339] ACPI: Interpreter enabled
[    0.086344] ACPI: (supports S0 S3 S4 S5)
[    0.086366] ACPI: Using IOAPIC for interrupt routing
[    0.140455] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[    0.140762] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.140985] ACPI: No dock devices found.
[    0.142065] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.142190] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.142194] pci 0000:00:04.0: PME# disabled
[    0.142235] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.142239] pci 0000:00:05.0: PME# disabled
[    0.142316] pci 0000:00:12.0: reg 10 io port: [0x8440-0x8447]
[    0.142326] pci 0000:00:12.0: reg 14 io port: [0x8430-0x8433]
[    0.142335] pci 0000:00:12.0: reg 18 io port: [0x8420-0x8427]
[    0.142345] pci 0000:00:12.0: reg 1c io port: [0x8410-0x8413]
[    0.142354] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f]
[    0.142364] pci 0000:00:12.0: reg 24 32bit mmio: [0xc0004000-0xc00041ff]
[    0.142374] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[    0.142410] pci 0000:00:12.0: supports D1 D2
[    0.142447] pci 0000:00:13.0: reg 10 32bit mmio: [0xc0005000-0xc0005fff]
[    0.142525] pci 0000:00:13.1: reg 10 32bit mmio: [0xc0006000-0xc0006fff]
[    0.142615] pci 0000:00:13.2: reg 10 32bit mmio: [0xc0007000-0xc0007fff]
[    0.142680] pci 0000:00:13.2: supports D1 D2
[    0.142683] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.142689] pci 0000:00:13.2: PME# disabled
[    0.142743] pci 0000:00:14.0: reg 10 io port: [0x8450-0x845f]
[    0.142753] pci 0000:00:14.0: reg 14 32bit mmio: [0xfed00000-0xfed003ff]
[    0.142791] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.142858] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
[    0.142868] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
[    0.142878] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[    0.142887] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[    0.142897] pci 0000:00:14.1: reg 20 io port: [0x8460-0x846f]
[    0.142999] pci 0000:00:14.2: reg 10 64bit mmio: [0xc0000000-0xc0003fff]
[    0.143065] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.143071] pci 0000:00:14.2: PME# disabled
[    0.143310] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xc8000000-0xcfffffff]
[    0.143316] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[    0.143321] pci 0000:01:05.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]
[    0.143332] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.143343] pci 0000:01:05.0: supports D1 D2
[    0.143361] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[    0.143365] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
[    0.143370] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff]
[    0.143428] pci 0000:02:00.0: reg 10 io port: [0xa000-0xa0ff]
[    0.143451] pci 0000:02:00.0: reg 18 64bit mmio: [0xc0200000-0xc0200fff]
[    0.143474] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.143521] pci 0000:02:00.0: supports D1 D2
[    0.143524] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.143529] pci 0000:02:00.0: PME# disabled
[    0.143604] pci 0000:00:04.0: bridge io port: [0x00-0xfff]
[    0.143608] pci 0000:00:04.0: bridge 32bit mmio: [0x000000-0x0fffff]
[    0.143613] pci 0000:00:04.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
[    0.143674] pci 0000:00:05.0: bridge io port: [0x00-0xfff]
[    0.143678] pci 0000:00:05.0: bridge 32bit mmio: [0x000000-0x0fffff]
[    0.143746] pci 0000:06:05.0: reg 10 32bit mmio: [0xc0310000-0xc0310fff]
[    0.143777] pci 0000:06:05.0: supports D1 D2
[    0.143780] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.143787] pci 0000:06:05.0: PME# disabled
[    0.143843] pci 0000:06:05.1: reg 10 32bit mmio: [0xc0311000-0xc03117ff]
[    0.143920] pci 0000:06:05.1: supports D1 D2
[    0.143923] pci 0000:06:05.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.143930] pci 0000:06:05.1: PME# disabled
[    0.143987] pci 0000:06:05.2: reg 10 32bit mmio: [0xc0311800-0xc03118ff]
[    0.144071] pci 0000:06:05.2: supports D1 D2
[    0.144074] pci 0000:06:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.144081] pci 0000:06:05.2: PME# disabled
[    0.144138] pci 0000:06:05.3: reg 10 32bit mmio: [0xc0311c00-0xc0311cff]
[    0.144216] pci 0000:06:05.3: supports D1 D2
[    0.144219] pci 0000:06:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.144225] pci 0000:06:05.3: PME# disabled
[    0.144281] pci 0000:06:05.4: reg 10 32bit mmio: [0xc0312000-0xc03120ff]
[    0.144359] pci 0000:06:05.4: supports D1 D2
[    0.144362] pci 0000:06:05.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.144369] pci 0000:06:05.4: PME# disabled
[    0.144434] pci 0000:06:06.0: reg 10 32bit mmio: [0xc0300000-0xc030ffff]
[    0.144574] pci 0000:00:14.4: transparent bridge
[    0.144587] pci 0000:00:14.4: bridge 32bit mmio: [0xc0300000-0xc03fffff]
[    0.144632] pci_bus 0000:00: on NUMA node 0
[    0.144637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.144746] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[    0.144818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
[    0.144917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.145004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.149530] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[    0.149642] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[    0.149752] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[    0.149862] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[    0.149973] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[    0.150082] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[    0.150192] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.150302] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[    0.150412] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[    0.150526] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.150532] vgaarb: loaded
[    0.150663] SCSI subsystem initialized
[    0.150735] libata version 3.00 loaded.
[    0.150833] usbcore: registered new interface driver usbfs
[    0.150848] usbcore: registered new interface driver hub
[    0.150876] usbcore: registered new device driver usb
[    0.151014] ACPI: WMI: Mapper loaded
[    0.151016] PCI: Using ACPI for IRQ routing
[    0.151023] pci 0000:00:04.0: BAR 13: can't allocate resource
[    0.151026] pci 0000:00:04.0: BAR 14: can't allocate resource
[    0.151029] pci 0000:00:04.0: BAR 15: can't allocate resource
[    0.151032] pci 0000:00:05.0: BAR 13: can't allocate resource
[    0.151035] pci 0000:00:05.0: BAR 14: can't allocate resource
[    0.151074] pci 0000:02:00.0: BAR 0: no parent found for of device [0xa000-0xa0ff]
[    0.151077] pci 0000:02:00.0: BAR 0: can't allocate resource
[    0.151081] pci 0000:02:00.0: BAR 2: no parent found for of device [0xc0200000-0xc0200fff]
[    0.151085] pci 0000:02:00.0: BAR 2: can't allocate resource
[    0.151243] NetLabel: Initializing
[    0.151245] NetLabel:  domain hash size = 128
[    0.151247] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.151263] NetLabel:  unlabeled traffic allowed by default
[    0.151294] Switching to clocksource tsc
[    0.152000] AppArmor: AppArmor Filesystem Enabled
[    0.152000] pnp: PnP ACPI init
[    0.152000] ACPI: bus type pnp registered
[    0.152728] pnp 00:08: io resource (0x4e-0x4f) overlaps 0000:02:00.0 BAR 0 (0x0-0xff), disabling
[    0.152733] pnp 00:08: io resource (0x72-0x73) overlaps 0000:02:00.0 BAR 0 (0x0-0xff), disabling
[    0.152738] pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:02:00.0 BAR 0 (0x0-0xff), disabling
[    0.152743] pnp 00:08: io resource (0x92-0x92) overlaps 0000:02:00.0 BAR 0 (0x0-0xff), disabling
[    0.152902] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR 6 (0x0-0x7ffff), disabling
[    0.152917] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[    0.152923] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:02:00.0 BAR 6 (0x0-0x1ffff), disabling
[    0.180751] pnp: PnP ACPI: found 10 devices
[    0.180754] ACPI: ACPI bus type pnp unregistered
[    0.180758] PnPBIOS: Disabled by ACPI PNP
[    0.180773] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.180777] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.180782] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.180791] system 00:08: ioport range 0x1080-0x1080 has been reserved
[    0.180795] system 00:08: ioport range 0x40b-0x40b has been reserved
[    0.180799] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.180803] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[    0.180807] system 00:08: ioport range 0xc00-0xc01 has been reserved
[    0.180811] system 00:08: ioport range 0xc14-0xc14 has been reserved
[    0.180815] system 00:08: ioport range 0xc50-0xc52 has been reserved
[    0.180819] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[    0.180823] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[    0.180827] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[    0.180831] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[    0.180834] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[    0.180838] system 00:08: ioport range 0x8000-0x805f has been reserved
[    0.180842] system 00:08: ioport range 0xf40-0xf47 has been reserved
[    0.180846] system 00:08: ioport range 0x280-0x293 has been reserved
[    0.180850] system 00:08: ioport range 0x87f-0x87f has been reserved
[    0.180857] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[    0.180862] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.215627] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.215631] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
[    0.215636] pci 0000:00:01.0:   MEM window: 0xc0100000-0xc01fffff
[    0.215640] pci 0000:00:01.0:   PREFETCH window: 0x000000c8000000-0x000000cfffffff
[    0.215657] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[    0.215660] pci 0000:00:04.0:   IO window: 0x2000-0x2fff
[    0.215665] pci 0000:00:04.0:   MEM window: 0x44000000-0x441fffff
[    0.215669] pci 0000:00:04.0:   PREFETCH window: 0x44200000-0x443fffff
[    0.215674] pci 0000:00:05.0: PCI bridge, secondary bus 0000:04
[    0.215678] pci 0000:00:05.0:   IO window: 0x3000-0x3fff
[    0.215682] pci 0000:00:05.0:   MEM window: 0x44400000-0x445fffff
[    0.215686] pci 0000:00:05.0:   PREFETCH window: 0x00000044600000-0x000000447fffff
[    0.215695] pci 0000:06:05.0: CardBus bridge, secondary bus 0000:07
[    0.215698] pci 0000:06:05.0:   IO window: 0x004000-0x0040ff
[    0.215705] pci 0000:06:05.0:   IO window: 0x004400-0x0044ff
[    0.215712] pci 0000:06:05.0:   PREFETCH window: 0x40000000-0x43ffffff
[    0.215719] pci 0000:06:05.0:   MEM window: 0x48000000-0x4bffffff
[    0.215726] pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
[    0.215731] pci 0000:00:14.4:   IO window: 0x4000-0x4fff
[    0.215738] pci 0000:00:14.4:   MEM window: 0xc0300000-0xc03fffff
[    0.215745] pci 0000:00:14.4:   PREFETCH window: 0x40000000-0x43ffffff
[    0.215763] pci 0000:00:04.0: enabling device (0000 -> 0003)
[    0.215768] pci 0000:00:04.0: setting latency timer to 64
[    0.215773] pci 0000:00:05.0: enabling device (0000 -> 0003)
[    0.215778] pci 0000:00:05.0: setting latency timer to 64
[    0.215799]   alloc irq_desc for 20 on node -1
[    0.215802]   alloc kstat_irqs on node -1
[    0.215808] pci 0000:06:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.215817] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.215821] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.215825] pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
[    0.215828] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
[    0.215832] pci_bus 0000:01: resource 2 pref mem [0xc8000000-0xcfffffff]
[    0.215835] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.215839] pci_bus 0000:02: resource 1 mem: [0x44000000-0x441fffff]
[    0.215842] pci_bus 0000:02: resource 2 pref mem [0x44200000-0x443fffff]
[    0.215846] pci_bus 0000:04: resource 0 io:  [0x3000-0x3fff]
[    0.215849] pci_bus 0000:04: resource 1 mem: [0x44400000-0x445fffff]
[    0.215853] pci_bus 0000:04: resource 2 pref mem [0x44600000-0x447fffff]
[    0.215857] pci_bus 0000:06: resource 0 io:  [0x4000-0x4fff]
[    0.215860] pci_bus 0000:06: resource 1 mem: [0xc0300000-0xc03fffff]
[    0.215864] pci_bus 0000:06: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.215867] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[    0.215871] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[    0.215874] pci_bus 0000:07: resource 0 io:  [0x4000-0x40ff]
[    0.215878] pci_bus 0000:07: resource 1 io:  [0x4400-0x44ff]
[    0.215881] pci_bus 0000:07: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.215885] pci_bus 0000:07: resource 3 mem: [0x48000000-0x4bffffff]
[    0.215927] NET: Registered protocol family 2
[    0.216032] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.216429] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.217192] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.217561] TCP: Hash tables configured (established 131072 bind 65536)
[    0.217564] TCP reno registered
[    0.217660] NET: Registered protocol family 1
[    0.217677] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.217746] pci 0000:01:05.0: Boot video device
[    0.217977] cpufreq-nforce2: No nForce2 chipset.
[    0.218007] Scanning for low memory corruption every 60 seconds
[    0.218139] audit: initializing netlink socket (disabled)
[    0.218155] type=2000 audit(1270134758.216:1): initialized
[    0.230781] Trying to unpack rootfs image as initramfs...
[    0.245103] highmem bounce pool size: 64 pages
[    0.245111] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.252707] VFS: Disk quotas dquot_6.5.2
[    0.252808] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.253497] fuse init (API version 7.13)
[    0.253597] msgmni has been set to 1720
[    0.253818] alg: No test for stdrng (krng)
[    0.253889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.253893] io scheduler noop registered
[    0.253896] io scheduler anticipatory registered
[    0.253898] io scheduler deadline registered
[    0.253948] io scheduler cfq registered (default)
[    0.254138] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.254167] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.259796] ACPI: AC Adapter [ACAD] (on-line)
[    0.259879] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.259939] ACPI: Lid Switch [LID]
[    0.259990] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.259994] ACPI: Power Button [PWRB]
[    0.260060] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.260064] ACPI: Power Button [PWRF]
[    0.260279] Marking TSC unstable due to TSC halts in idle
[    0.260371] processor LNXCPU:00: registered as cooling_device0
[    0.263697] Switching to clocksource acpi_pm
[    0.296888] ACPI: Invalid active0 threshold
[    0.298537] thermal LNXTHERM:01: registered as thermal_zone0
[    0.298547] ACPI: Thermal Zone [THRM] (33 C)
[    0.300327] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.301759] brd: module loaded
[    0.302308] loop: module loaded
[    0.302405] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.302571] pata_acpi 0000:00:12.0: enabling device (0005 -> 0007)
[    0.302579]   alloc irq_desc for 22 on node -1
[    0.302582]   alloc kstat_irqs on node -1
[    0.302590] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.302657]   alloc irq_desc for 16 on node -1
[    0.302659]   alloc kstat_irqs on node -1
[    0.302664] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.302686] pata_acpi 0000:00:14.1: setting latency timer to 64
[    0.303055] Fixed MDIO Bus: probed
[    0.303096] PPP generic driver version 2.4.2
[    0.303135] tun: Universal TUN/TAP device driver, 1.6
[    0.303138] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.303225] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.303244]   alloc irq_desc for 19 on node -1
[    0.303247]   alloc kstat_irqs on node -1
[    0.303251] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.303271] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    0.303308] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[    0.303374] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0007000
[    0.308359] isapnp: Scanning for PnP cards...
[    0.313947] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.314073] usb usb1: configuration #1 chosen from 1 choice
[    0.314108] hub 1-0:1.0: USB hub found
[    0.314120] hub 1-0:1.0: 8 ports detected
[    0.314211] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.314234] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.314255] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.314301] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    0.314324] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0005000
[    0.368410] usb usb2: configuration #1 chosen from 1 choice
[    0.368446] hub 2-0:1.0: USB hub found
[    0.368461] hub 2-0:1.0: 4 ports detected
[    0.368535] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.368558] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    0.368605] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    0.368630] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0006000
[    0.449588] usb usb3: configuration #1 chosen from 1 choice
[    0.449630] hub 3-0:1.0: USB hub found
[    0.449647] hub 3-0:1.0: 4 ports detected
[    0.449727] uhci_hcd: USB Universal Host Controller Interface driver
[    0.449818] PNP: PS/2 Controller [PNP0f0e:MSE0] at 0x0,0x0 irq 12
[    0.449821] PNP: PS/2 controller has invalid data port 0x0; using default 0x60
[    0.449824] PNP: PS/2 controller has invalid command port 0x0; using default 0x64
[    0.449827] PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.473164] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.476231] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.476418] mice: PS/2 mouse device common for all mice
[    0.479861] rtc_cmos 00:04: RTC can wake from S4
[    0.479926] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.479960] rtc0: alarms up to one month, 114 bytes nvram
[    0.480133] device-mapper: uevent: version 1.0.3
[    0.480269] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.481320] device-mapper: multipath: version 1.1.0 loaded
[    0.481323] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.481930] EISA: Probing bus 0 at eisa.0
[    0.481938] Cannot allocate resource for EISA slot 1
[    0.481941] Cannot allocate resource for EISA slot 2
[    0.481944] Cannot allocate resource for EISA slot 3
[    0.481946] Cannot allocate resource for EISA slot 4
[    0.481963] Cannot allocate resource for EISA slot 8
[    0.481965] EISA: Detected 0 cards.
[    0.484780] cpuidle: using governor ladder
[    0.484849] cpuidle: using governor menu
[    0.485379] TCP cubic registered
[    0.485560] NET: Registered protocol family 10
[    0.486087] lo: Disabled Privacy Extensions
[    0.486458] NET: Registered protocol family 17
[    0.486496] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[    0.486536] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x10
[    0.486539] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x18
[    0.486582] Using IPI No-Shortcut mode
[    0.486689] PM: Resume from disk failed.
[    0.486702] registered taskstats version 1
[    0.487149]   Magic number: 6:818:233
[    0.487250] rtc_cmos 00:04: setting system clock to 2010-04-01 15:12:39 UTC (1270134759)
[    0.487254] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.487256] EDD information not available.
[    0.491608] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.678158] ACPI: Battery Slot [BAT1] (battery present)
[    0.757147] Freeing initrd memory: 7643k freed
[    0.892576] isapnp: No Plug & Play device found
[    0.892601] Freeing unused kernel memory: 656k freed
[    0.893173] Write protecting the kernel text: 4672k
[    0.893212] Write protecting the kernel read-only data: 1840k
[    0.914212] udev: starting version 151
[    1.160959] scsi0 : pata_atiixp
[    1.161154] scsi1 : pata_atiixp
[    1.161956] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
[    1.161960] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
[    1.162025] sata_sil 0000:00:12.0: version 2.4
[    1.162711] scsi2 : sata_sil
[    1.177349] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.177373] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.177422] r8169 0000:02:00.0: setting latency timer to 64
[    1.177450] r8169 0000:02:00.0: no MSI. Back to INTx.
[    1.178262] eth0: RTL8168b/8111b at 0xf80bc000, 00:0d:5e:b1:cf:60, XID 18000000 IRQ 16
[    1.179826] scsi3 : sata_sil
[    1.180272] ata3: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc0004080 irq 22
[    1.180277] ata4: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc00040c0 irq 22
[    1.324654] ata1.00: ATAPI: Optiarc DVD RW AD-7540A, 1.A7, max UDMA/33
[    1.340610] ata1.00: configured for UDMA/33
[    1.341988] scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-7540A  1.A7 PQ: 0 ANSI: 5
[    1.345129] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.345134] Uniform CD-ROM driver Revision: 3.20
[    1.345386] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.345515] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.780076] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[    1.788555] ata3.00: ATA-7: Hitachi HTS541610J9SA00, SBCOC70P, max UDMA/100
[    1.788559] ata3.00: 195371568 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    1.804571] ata3.00: configured for UDMA/100
[    1.804667] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SBCO PQ: 0 ANSI: 5
[    1.804817] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.805053] sd 2:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
[    1.805108] sd 2:0:0:0: [sda] Write Protect is off
[    1.805111] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.805140] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.805290]  sda:
[    2.124062] ata4: SATA link down (SStatus 0 SControl 310)
[    2.230031]  sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.261349] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.270967]   alloc irq_desc for 21 on node -1
[    2.270972]   alloc kstat_irqs on node -1
[    2.270982] ohci1394 0000:06:05.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.326085] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[c0311000-c03117ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    2.901624] EXT4-fs (sda6): mounted filesystem with ordered data mode
[    3.604171] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00004ce05503c224]
[   16.968961] Adding 1068312k swap on /dev/sda3.  Priority:-1 extents:1 across:1068312k 
[   16.997450] udev: starting version 151
[   17.116906] lp: driver loaded but no devices found
[   17.278599] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8450, revision 0
[   17.380231] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.461175] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   17.466811] Linux agpgart interface v0.103
[   17.483937] sdhci: Secure Digital Host Controller Interface driver
[   17.483941] sdhci: Copyright(c) Pierre Ossman
[   17.652317] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[   17.653018] [drm] Initialized drm 1.1.0 20060810
[   17.660796] acpi device:1e: registered as cooling_device1
[   17.660998] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:1c/LNXVIDEO:00/input/input5
[   17.661062] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   17.687273] type=1505 audit(1270102376.696:2):  operation="profile_load" pid=554 name="/sbin/dhclient3"
[   17.687628] type=1505 audit(1270102376.696:3):  operation="profile_load" pid=554 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   17.687824] type=1505 audit(1270102376.696:4):  operation="profile_load" pid=554 name="/usr/lib/connman/scripts/dhclient-script"
[   17.714327] sdhci-pci 0000:06:05.2: SDHCI controller found [1180:0822] (rev 17)
[   17.714352] sdhci-pci 0000:06:05.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   17.717175] cfg80211: Calling CRDA to update world regulatory domain
[   17.717397] Registered led device: mmc0::
[   17.718516] mmc0: SDHCI controller on PCI [0000:06:05.2] using PIO
[   17.767217] yenta_cardbus 0000:06:05.0: CardBus bridge found [1033:880c]
[   17.809379] cfg80211: World regulatory domain updated:
[   17.809384] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.809388] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.809392] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.809396] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.809399] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.809403] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.839748] kjournald starting.  Commit interval 5 seconds
[   17.843491] EXT3 FS on sda2, internal journal
[   17.843499] EXT3-fs: mounted filesystem with ordered data mode.
[   17.893957] yenta_cardbus 0000:06:05.0: ISA IRQ mask 0x0cb8, PCI irq 20
[   17.893964] yenta_cardbus 0000:06:05.0: Socket status: 30000006
[   17.893974] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[   17.893979] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: clean.
[   17.894199] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge Memory window: 0xc0300000 - 0xc03fffff
[   17.894203] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[   17.971562] ath5k 0000:06:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   17.971621] ath5k 0000:06:06.0: registered as 'phy0'
[   18.552910] [drm] radeon defaulting to kernel modesetting.
[   18.552916] [drm] radeon kernel modesetting enabled.
[   18.553139] radeon 0000:01:05.0: power state changed by ACPI to D0
[   18.553150]   alloc irq_desc for 17 on node -1
[   18.553153]   alloc kstat_irqs on node -1
[   18.553162] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   18.558806] [drm] radeon: Initializing kernel modesetting.
[   18.560454] [drm] register mmio base: 0xC0100000
[   18.560458] [drm] register mmio size: 65536
[   18.560777] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[   18.560794] [drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)
[   18.560840] [drm] Generation 2 PCI interface, using max accessible memory
[   18.560843] [drm] radeon: VRAM 128M
[   18.560846] [drm] radeon: VRAM from 0x38000000 to 0x3FFFFFFF
[   18.560849] [drm] radeon: GTT 32M
[   18.560851] [drm] radeon: GTT from 0x40000000 to 0x41FFFFFF
[   18.560887] [drm] radeon: irq initialized.
[   18.560991] [drm] Detected VRAM RAM=128M, BAR=128M
[   18.560997] [drm] RAM width 128bits DDR
[   18.563100] [TTM] Zone  kernel: Available graphics memory: 444486 kiB.
[   18.563105] [TTM] Zone highmem: Available graphics memory: 447818 kiB.
[   18.563125] [drm] radeon: 128M of VRAM memory ready
[   18.563128] [drm] radeon: 32M of GTT memory ready.
[   18.563150] [drm] GART: num cpu pages 8192, num gpu pages 8192
[   18.563572] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[   18.563588] [drm] radeon: cp idle (0x10000C03)
[   18.563690] [drm] Loading R300 Microcode
[   18.564189] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[   18.572503] [drm] radeon: ring at 0x0000000040000000
[   18.572524] [drm] ring test succeeded in 1 usecs
[   18.572707] [drm] radeon: ib pool ready.
[   18.572784] [drm] ib test succeeded in 0 usecs
[   18.572897] [drm] Panel ID String: LPL                     
[   18.572900] [drm] Panel Size 1280x800
[   18.572952] [drm] Radeon Display Connectors
[   18.572955] [drm] Connector 0:
[   18.572957] [drm]   VGA
[   18.572960] [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[   18.572962] [drm]   Encoders:
[   18.572964] [drm]     CRT1: INTERNAL_DAC2
[   18.572966] [drm] Connector 1:
[   18.572968] [drm]   LVDS
[   18.572971] [drm]   DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[   18.572974] [drm]   Encoders:
[   18.572976] [drm]     LCD1: INTERNAL_LVDS
[   18.638410] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
[   18.666365] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
[   18.843542] type=1505 audit(1270102377.852:5):  operation="profile_load" pid=691 name="/usr/share/gdm/guest-session/Xsession"
[   18.861069] type=1505 audit(1270102377.872:6):  operation="profile_replace" pid=693 name="/sbin/dhclient3"
[   18.861449] type=1505 audit(1270102377.872:7):  operation="profile_replace" pid=693 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   18.861655] type=1505 audit(1270102377.872:8):  operation="profile_replace" pid=693 name="/usr/lib/connman/scripts/dhclient-script"
[   18.862562] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   18.864919] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   18.865900] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   18.866712] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   18.867600] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   18.909928] type=1505 audit(1270102377.920:9):  operation="profile_load" pid=696 name="/usr/bin/evince"
[   18.929390] type=1505 audit(1270102377.940:10):  operation="profile_load" pid=696 name="/usr/bin/evince-previewer"
[   18.932292] type=1505 audit(1270102377.944:11):  operation="profile_load" pid=696 name="/usr/bin/evince-thumbnailer"
[   19.001168] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.046481] r8169: eth0: link up
[   19.046493] r8169: eth0: link up
[   19.072885] [drm] fb mappable at 0xC8040000
[   19.072889] [drm] vram apper at 0xC8000000
[   19.072892] [drm] size 4096000
[   19.072894] [drm] fb depth is 24
[   19.072896] [drm]    pitch is 5120
[   19.115806] fb0: radeondrmfb frame buffer device
[   19.115810] registered panic notifier
[   19.115817] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[   19.160521] vga16fb: initializing
[   19.160528] vga16fb: mapped to 0xc00a0000
[   19.160534] vga16fb: not registering due to another framebuffer present
[   19.167201] hda_codec: ALC262: BIOS auto-probing.
[   19.167706] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
[   19.330634] Console: switching to colour frame buffer device 160x50
[   19.621513] ppdev: user-space parallel port driver
[   19.733866] ath: EEPROM regdomain: 0x40
[   19.733870] ath: EEPROM indicates we should expect a direct regpair map
[   19.733875] ath: Country alpha2 being used: JP
[   19.733877] ath: Regpair used: 0x40
[   19.742062] phy0: Selected rate control algorithm 'minstrel'
[   19.742898] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61)
[   19.743449] cfg80211: Calling CRDA for country: JP
[   19.754165] cfg80211: Regulatory domain changed to country: JP
[   19.754170] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.754174] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   19.754177] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   19.754181] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   19.754184] 	(4910000 KHz - 4930000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   19.754187] 	(4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm)
[   19.754190] 	(4930000 KHz - 4950000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   19.754193] 	(5030000 KHz - 5045000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   19.754197] 	(5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm)
[   19.754200] 	(5050000 KHz - 5060000 KHz @ 10000 KHz), (N/A, 2300 mBm)
[   19.754203] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   19.754206] 	(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   19.754209] 	(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm)
[   19.832845] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   29.712029] eth0: no IPv6 routers present
[ 2788.234810] irq 21: nobody cared (try booting with the "irqpoll" option)
[ 2788.234826] Pid: 0, comm: swapper Not tainted 2.6.32-18-generic #27-Ubuntu
[ 2788.234833] Call Trace:
[ 2788.234854]  [<c0588713>] ? printk+0x1d/0x22
[ 2788.234866]  [<c01a12fc>] __report_bad_irq+0x2c/0x90
[ 2788.234879]  [<c019fa34>] ? handle_IRQ_event+0x54/0x150
[ 2788.234887]  [<c01a14b0>] note_interrupt+0x150/0x190
[ 2788.234896]  [<c01a1abc>] handle_fasteoi_irq+0xac/0xd0
[ 2788.234907]  [<c01059ed>] handle_irq+0x1d/0x30
[ 2788.234917]  [<c058f1ec>] do_IRQ+0x4c/0xc0
[ 2788.234925]  [<c016d3d5>] ? sched_clock_local+0xa5/0x180
[ 2788.234934]  [<c0103a30>] common_interrupt+0x30/0x40
[ 2788.234946]  [<c039c5b9>] ? acpi_idle_enter_simple+0x119/0x148
[ 2788.234955]  [<c039c2cd>] acpi_idle_enter_bm+0xc7/0x29a
[ 2788.234966]  [<c049ffaa>] cpuidle_idle_call+0x7a/0x100
[ 2788.234974]  [<c01021d4>] cpu_idle+0x94/0xd0
[ 2788.234985]  [<c0578938>] rest_init+0x58/0x60
[ 2788.234996]  [<c07a18f0>] start_kernel+0x345/0x34b
[ 2788.235004]  [<c07a13d7>] ? unknown_bootoption+0x0/0x19e
[ 2788.235014]  [<c07a10aa>] i386_start_kernel+0xaa/0xb1
[ 2788.235019] handlers:
[ 2788.235023] [<f80cd270>] (ohci_irq_handler+0x0/0x790 [ohci1394])
[ 2788.235056] [<f830dd10>] (ath5k_intr+0x0/0x2b0 [ath5k])
[ 2788.235076] Disabling IRQ #21
[12515.716110] usb 2-1: new full speed USB device using ohci_hcd and address 2
[12515.917509] usb 2-1: configuration #1 chosen from 1 choice
[12516.025231] Linux video capture interface: v2.00
[12516.072191] gspca: main v2.7.0 registered
[12516.108221] gspca: probing 046d:08a0
[12517.228253] zc3xx: probe sensor -> 000e
[12517.228262] zc3xx: Find Sensor PAS202B
[12517.236510] gspca: probe ok
[12517.236561] usbcore: registered new interface driver zc3xx
[12517.236569] zc3xx: registered
