Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1799)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_session_output_size
BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_ULLP1U.bin toc = none
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_current_track
BraseroBurnURI no burn:// URI found
BraseroBurnURI stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_set_output_size_for_current_track
BraseroLocalTrack stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_session_output_size
BraseroLocalTrack output set (IMAGE) image = /tmp/brasero_tmp_BALP1U.bin toc = none
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_current_track
BraseroLocalTrack no remote URIs
BraseroLocalTrack stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroChecksumImage Dummy operation, skipping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage There is a checksum already 0
BraseroWodim called brasero_job_get_action
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim got varg:
BraseroWodim deactivating
BraseroWodim called brasero_job_get_action
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim called brasero_job_get_device
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_speed
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_get_fd_in
BraseroWodim called brasero_job_get_current_track
BraseroWodim called brasero_job_set_current_action
BraseroWodim got varg:
	wodim
	-v
	dev=/dev/sr0
	-dummy
	speed=48
	driveropts=burnfree
	fs=16m
	-data
	-nopad
	/home/z/Плот/openSUSE-GNOME-LiveCD-Build0336-i686.iso
BraseroWodim Launching command
BraseroWodim called brasero_job_get_fd_out
BraseroWodim stderr: wodim: No write mode specified.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Asuming -tao mode.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Future versions of wodim may have different drive dependent defaults.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: devname: '/dev/sr0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: scsibus: -2 target: -2 lun: -2
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Linux sg driver version: 3.5.27
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Wodim version: 1.1.9
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: SCSI buffer size: 64512
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: communication breaks or freezes immediately after that.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: TOC Type: 1 = CD-ROM
BraseroWodim stdout: Driveropts: 'burnfree'
BraseroWodim stdout: Device type    : Removable CD-ROM
BraseroWodim stdout: Version        : 5
BraseroWodim stdout: Response Format: 2
BraseroWodim stdout: Capabilities   : 
BraseroWodim stdout: Vendor_info    : 'ASUS    '
BraseroWodim stdout: Identification : 'DRW-20B1ST      '
BraseroWodim stdout: Revision       : '1.01'
BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW.
BraseroWodim stdout: Current: 0x0009 (CD-R)
BraseroWodim stdout: Profile: 0x002B (DVD+R/DL) 
BraseroWodim stdout: Profile: 0x001B (DVD+R) 
BraseroWodim stdout: Profile: 0x001A (DVD+RW) 
BraseroWodim stdout: Profile: 0x0016 (DVD-R/DL layer jump recording) 
BraseroWodim stdout: Profile: 0x0015 (DVD-R/DL sequential recording) 
BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording) 
BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite) 
BraseroWodim stdout: Profile: 0x0012 (DVD-RAM) 
BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording) 
BraseroWodim stdout: Profile: 0x0010 (DVD-ROM) 
BraseroWodim stdout: Profile: 0x000A (CD-RW) 
BraseroWodim stdout: Profile: 0x0009 (CD-R) (current)
BraseroWodim stdout: Profile: 0x0008 (CD-ROM) 
BraseroWodim stdout: Profile: 0x0002 (Removable disk) 
BraseroWodim stdout: Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
BraseroWodim stdout: Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED 
BraseroWodim stdout: Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
BraseroWodim stdout: Drive buf size : 1867008 = 1823 KB
BraseroWodim stdout: FIFO size      : 16777216 = 16384 KB
BraseroWodim stderr: Speed set to 8468 KB/s
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Track 01: data   696 MB        
BraseroWodim stdout: Total size:      799 MB (79:11.38) = 356354 sectors
BraseroWodim stdout: Lout start:      799 MB (79:13/29) = 356354 sectors
BraseroWodim stdout: Current Secsize: 2048
BraseroWodim stdout: ATIP info from disk:
BraseroWodim stdout:   Indicated writing power: 7
BraseroWodim stdout:   Is not unrestricted
BraseroWodim stdout:   Is not erasable
BraseroWodim stdout:   ATIP start of lead in:  -11597 (97:27/28)
BraseroWodim stdout:   ATIP start of lead out: 359849 (79:59/74)
BraseroWodim stdout: Disk type:    Short strategy type (Phthalocyanine or similar)
BraseroWodim stdout: Manuf. index: 20
BraseroWodim stdout: Manufacturer: Princo Corporation
BraseroWodim stdout: Blocks total: 359849 Blocks current: 359849 Blocks remaining: 3495
BraseroWodim stdout: Forcespeed is OFF.
BraseroWodim stdout: Starting to write CD/DVD at speed  48.0 in dummy TAO mode for single session.
BraseroWodim stdout: Last chance to quit, starting dummy write in    4 seconds.
BraseroWodim called brasero_job_set_dangerous
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    3 seconds.
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    2 seconds.
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    1 seconds.   0 seconds. Operation starts.
BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready.
BraseroWodim stdout: Starting new track at sector: 0
BraseroWodim stdout: 
BraseroWodim stderr: Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: CDB:  2A 00 00 00 00 1F 00 00 1F 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: status: 0x2 (CHECK CONDITION)
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Key: 0x0 No Additional Sense, Segment 11
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense flags: Blk 0 (not valid) 
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: cmd finished after 50.734s timeout 40s
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: A write error occured.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Please properly read the error message above.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Track 01:    0 of  696 MB written.
BraseroWodim stdout: write track data: error after 63488 bytes
BraseroWodim stdout: Writing  time:   66.179s
BraseroWodim stdout: Average write speed  71.8x.
BraseroWodim stdout: Fixating...
BraseroWodim called brasero_job_get_action
BraseroWodim called brasero_job_set_current_action
BraseroWodim stdout: WARNING: Some drives don't like fixation in dummy mode.
BraseroWodim stderr: wodim: fifo had 256 puts and 2 gets.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Fixating time:    0.007s
BraseroWodim stderr: wodim: fifo was 0 times empty and 1 times full, min fill was 99%.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: BURN-Free was never needed.
BraseroWodim stderr: HUP
BraseroWodim stdout: HUP
BraseroWodim process finished with status 254
BraseroWodim called brasero_job_error
BraseroWodim finished with an error
BraseroWodim asked to stop because of an error
	error		= 0
	message	= "no message"
BraseroWodim stopping
BraseroWodim got killed
Session error : unknown (brasero_burn_record brasero-burn.c:2769)
