--- lspci	2008-11-23 01:01:16.000000000 -0500
+++ lspci2	2008-11-23 01:38:15.000000000 -0500
@@ -4,6 +4,7 @@
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 	Latency: 0
 	Capabilities: [e0] Vendor Specific Information <?>
+	Kernel driver in use: agpgart-intel
 	Kernel modules: intel-agp
 
 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
@@ -12,10 +13,10 @@
 	Latency: 0, Cache Line Size: 64 bytes
 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 	I/O behind bridge: 0000d000-0000dfff
-	Memory behind bridge: f8000000-fbffffff
-	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
+	Memory behind bridge: fda00000-fdafffff
+	Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
-	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
+	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 	Capabilities: [88] Subsystem: Dell Device [1028:0238]
 	Capabilities: [80] Power Management version 3
@@ -30,17 +31,17 @@
 			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
 			MaxPayload 128 bytes, MaxReadReq 128 bytes
 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
-		LnkCap:	Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 <256ns, L1 <4us
+		LnkCap:	Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us
 			ClockPM- Suprise- LLActRep- BwNot-
-		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
 			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl+
 		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 			Control: AttnInd Off, PwrInd On, Power- Interlock-
-		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
-			Changed: MRL- PresDet+ LinkState-
+		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+			Changed: MRL- PresDet- LinkState-
 		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
 		RootCap: CRSVisible-
 		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
@@ -49,6 +50,22 @@
 	Kernel driver in use: pcieport-driver
 	Kernel modules: shpchp
 
+00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 02)
+	Subsystem: Dell Device [1028:0238]
+	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+	Latency: 0
+	Interrupt: pin A routed to IRQ 16
+	Region 0: Memory at fdf00000 (32-bit, non-prefetchable) [size=512K]
+	Region 1: I/O ports at ff00 [size=8]
+	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
+	Region 3: Memory at fdc00000 (32-bit, non-prefetchable) [size=1M]
+	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
+		Address: 00000000  Data: 0000
+	Capabilities: [d0] Power Management version 2
+		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+
 00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
 	Subsystem: Dell Device [1028:0238]
 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
@@ -57,7 +74,7 @@
 	Interrupt: pin A routed to IRQ 2301
 	Region 0: Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K]
 	Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
-	Region 2: I/O ports at ff00 [size=32]
+	Region 2: I/O ports at fe00 [size=32]
 	Capabilities: [c8] Power Management version 2
 		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
@@ -73,7 +90,7 @@
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin A routed to IRQ 16
-	Region 4: I/O ports at fe00 [size=32]
+	Region 4: I/O ports at fd00 [size=32]
 	Capabilities: [50] Vendor Specific Information <?>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd
@@ -84,7 +101,7 @@
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin B routed to IRQ 21
-	Region 4: I/O ports at fd00 [size=32]
+	Region 4: I/O ports at fc00 [size=32]
 	Capabilities: [50] Vendor Specific Information <?>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd
@@ -95,7 +112,7 @@
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin D routed to IRQ 19
-	Region 4: I/O ports at fc00 [size=32]
+	Region 4: I/O ports at fb00 [size=32]
 	Capabilities: [50] Vendor Specific Information <?>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd
@@ -109,7 +126,9 @@
 	Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
 	Capabilities: [50] Power Management version 2
 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
-		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
+		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+	Capabilities: [58] Debug port: BAR=1 offset=00a0
+	Capabilities: [98] Vendor Specific Information <?>
 	Kernel driver in use: ehci_hcd
 	Kernel modules: ehci-hcd
 
@@ -148,7 +167,7 @@
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin A routed to IRQ 23
-	Region 4: I/O ports at fb00 [size=32]
+	Region 4: I/O ports at fa00 [size=32]
 	Capabilities: [50] Vendor Specific Information <?>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd
@@ -159,7 +178,7 @@
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin B routed to IRQ 19
-	Region 4: I/O ports at fa00 [size=32]
+	Region 4: I/O ports at f900 [size=32]
 	Capabilities: [50] Vendor Specific Information <?>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd
@@ -170,7 +189,7 @@
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin C routed to IRQ 18
-	Region 4: I/O ports at f900 [size=32]
+	Region 4: I/O ports at f800 [size=32]
 	Capabilities: [50] Vendor Specific Information <?>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd
@@ -184,7 +203,9 @@
 	Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=1K]
 	Capabilities: [50] Power Management version 2
 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
-		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
+	Capabilities: [58] Debug port: BAR=1 offset=00a0
+	Capabilities: [98] Vendor Specific Information <?>
 	Kernel driver in use: ehci_hcd
 	Kernel modules: ehci-hcd
 
@@ -194,8 +215,8 @@
 	Latency: 0
 	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
 	I/O behind bridge: 0000c000-0000cfff
-	Memory behind bridge: fdd00000-fddfffff
-	Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
+	Memory behind bridge: fde00000-fdefffff
+	Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
 	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
@@ -215,11 +236,11 @@
 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin A routed to IRQ 2302
-	Region 0: I/O ports at f800 [size=8]
-	Region 1: I/O ports at f700 [size=4]
-	Region 2: I/O ports at f600 [size=8]
-	Region 3: I/O ports at f500 [size=4]
-	Region 4: I/O ports at f400 [size=32]
+	Region 0: I/O ports at f700 [size=8]
+	Region 1: I/O ports at f600 [size=4]
+	Region 2: I/O ports at f500 [size=8]
+	Region 3: I/O ports at f400 [size=4]
+	Region 4: I/O ports at f300 [size=32]
 	Region 5: Memory at fdffc000 (32-bit, non-prefetchable) [size=2K]
 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/4 Enable+
 		Address: fee0300c  Data: 4181
@@ -240,47 +261,13 @@
 	Region 4: I/O ports at 0500 [size=32]
 	Kernel modules: i2c-i801
 
-01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8300 GS [10de:0423] (rev a1)
-	Subsystem: nVidia Corporation Device [10de:0494]
-	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-	Latency: 0
-	Interrupt: pin A routed to IRQ 16
-	Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
-	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
-	Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
-	Region 5: I/O ports at df00 [size=128]
-	[virtual] Expansion ROM at fb000000 [disabled] [size=128K]
-	Capabilities: [60] Power Management version 2
-		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
-		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
-		Address: 0000000000000000  Data: 0000
-	Capabilities: [78] Express (v1) Endpoint, MSI 00
-		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
-			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
-		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
-			RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
-			MaxPayload 128 bytes, MaxReadReq 512 bytes
-		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
-		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM unknown, Latency L0 <512ns, L1 <4us
-			ClockPM- Suprise- LLActRep- BwNot-
-		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
-			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
-	Capabilities: [100] Virtual Channel <?>
-	Capabilities: [128] Power Budgeting <?>
-	Capabilities: [600] Vendor Specific Information <?>
-	Kernel driver in use: nvidia
-	Kernel modules: nvidiafb, nvidia
-
 02:00.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 61) (prog-if 10)
 	Subsystem: Dell Device [1028:8010]
 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
 	Interrupt: pin A routed to IRQ 21
-	Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=4K]
+	Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=4K]
 	Capabilities: [44] Power Management version 2
 		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
 		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
