GNOME Bugzilla – Bug 563924
ISO burn on Intrepid with Brasero will not mount
Last modified: 2009-03-06 00:57:21 UTC
Please describe the problem: If I burn an iso image ( CD-RW) with Brasero 0.8.2 on Ubuntu 8.10 the disk will not mount on Ubuntu 8,10. However, it will mount properly on Ubuntu 8.04. Iso image disks burned on Ubuntu 8.04 with Brasero 0.7.1 mount properly on Ubuntu 8.10. Steps to reproduce: 1. Burn an ISO file with Brasero 0.8,2 on Ubuntu 8.10 2. 3. Actual results: When you try to mount the iso disk (created on Ubuntu 8.10) on Ubuntu 8.10 the following entries fill up the messages log: [ 2192.591823] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2192.656287] ISO 9660 Extensions: RRIP_1991A [ 2247.042382] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 2247.042391] sr 5:0:0:0: [sr0] Sense Key : Medium Error [current] [ 2247.042394] sr 5:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error [ 2247.042398] end_request: I/O error, dev sr0, sector 1424600 [ 2247.042403] Buffer I/O error on device sr0, logical block 356150 [ 2251.874334] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 2251.874342] sr 5:0:0:0: [sr0] Sense Key : Medium Error [current] [ 2251.874346] sr 5:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error [ 2251.874350] end_request: I/O error, dev sr0, sector 1424600 ... ... I assume it eventually times out because the following message pops up in a dialog box: Unable to mount cd ... DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Expected results: The ISO CD should mount when inserted in the DVD drive. Does this happen every time? Yes Other information: This happened with four new CD-RW disks that I burned on Ubuntu 8.10. The same four disk re-burned on Ubuntu 8.04 mounted properly on Ubuntu 8.10 The same cdrom drive is used on Ubuntu 8.04 and Ubuntu 8.10. The drive information is listed below. *-cdrom description: DVD-RAM writer product: CDDVDW SH-S203B vendor: TSSTcorp physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 logical name: /media/cdrom0 version: SB01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,nosuid,nodev,utf8 state=mounted status=ready This may be a DBus problem instead of a Brasero one!! What else can I provide to help solve this problem. I submitted this bug and I noticed some slightly different entries in the message log when I tried to mount a 5th CD-RW disk on Ubuntu 8.10 that was created on Ubuntu 8.10. [10859.673944] UDF-fs: No VRS found [10859.744303] ISO 9660 Extensions: Microsoft Joliet Level 3 [10859.797482] ISO 9660 Extensions: RRIP_1991A [10943.189214] sr0: CDROM (ioctl) error, command: Start/Stop Unit 1b 00 00 00 03 00 [10943.189227] sr: Sense Key : Hardware Error [current] [10943.189230] sr: Add. Sense: Media load or eject failed [11017.252507] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [11017.252514] sr 5:0:0:0: [sr0] Sense Key : Hardware Error [current] [11017.252519] sr 5:0:0:0: [sr0] Add. Sense: Timeout on logical unit [11017.252525] end_request: I/O error, dev sr0, sector 486776 [11017.252530] Buffer I/O error on device sr0, logical block 121694 [11023.664163] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [11023.664171] sr 5:0:0:0: [sr0] Sense Key : Hardware Error [current] [11023.664175] sr 5:0:0:0: [sr0] Add. Sense: Timeout on logical unit [11023.664180] end_request: I/O error, dev sr0, sector 486776 [11023.664185] Buffer I/O error on device sr0, logical block 121694 [11030.101587] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [11030.101595] sr 5:0:0:0: [sr0] Sense Key : Hardware Error [current] [11030.101599] sr 5:0:0:0: [sr0] Add. Sense: Timeout on logical unit [11030.101604] end_request: I/O error, dev sr0, sector 486776 [11030.101609] Buffer I/O error on device sr0, logical block 121694 [11036.513403] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [11036.513409] sr 5:0:0:0: [sr0] Sense Key : Hardware Error [current] [11036.513415] sr 5:0:0:0: [sr0] Add. Sense: Timeout on logical unit [11036.513420] end_request: I/O error, dev sr0, sector 486776 [11036.513425] Buffer I/O error on device sr0, logical block 121694 [11042.927837] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [11042.927845] sr 5:0:0:0: [sr0] Sense Key : Hardware Error [current] [11042.927849] sr 5:0:0:0: [sr0] Add. Sense: Timeout on logical unit [11042.927854] end_request: I/O error, dev sr0, sector 486776 [11042.927859] Buffer I/O error on device sr0, logical block 121694 [11049.337058] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [11049.337066] sr 5:0:0:0: [sr0] Sense Key : Hardware Error [current] [11049.337070] sr 5:0:0:0: [sr0] Add. Sense: Timeout on logical unit [11049.337074] end_request: I/O error, dev sr0, sector 486776 [11049.337079] Buffer I/O error on device sr0, logical block 121694 [11055.748857] sr 5:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [11055.748864] sr 5:0:0:0: [sr0] Sense Key : Hardware Error [current] [11055.748868] sr 5:0:0:0: [sr0] Add. Sense: Timeout on logical unit [11055.748872] end_request: I/O error, dev sr0, sector 486776 [11055.748877] Buffer I/O error on device sr0, logical block 121694 [11055.849805] cdrom: sr0: mrw address space DMA selected [11055.894074] cdrom open: mrw_status 'not mrw' [11062.364162] sr 5:0:0:0: [sr0] Result: ...
I don't think this is a Brasero problem but a problem on wodim or the cd. Can you reproduce this problem everytime you burn a cd ? Can you attach a debug log of brasero (brasero -g) please ?
I originally reported this problem at launchpad.net/ubuntu. It is bug #295795. Other users have reported the same problem in the comments. This problem does occur each time I burn an ISO cd with brasero. This problem does not occur when I use the Nautilus CD/DVD creator to burn ISO cds. At the next opportunity I will burn an ISO cd with basero and attach the debug log.
Created attachment 124565 [details] brasero debug log The is the brasero debug log requested by the developer.
I burned an ISO CD with brasero 0.8.2 using the -g option on Ubuntu 8.10 to generate the debug log requested by the developer. This CD failed to auto mount on Ubuntu 8.10 with same symptoms described in the original problem description. If there is anything else I can provide, please let me know.
I have the same problem also using Ubuntu 8.10. Exact symptoms as described above, accross multiple disks and drives. Again burning works with Nautilus.
I installed brasero 0.9.1 from getdeb.net. This fixed the problem described above. I had to re-burn all CDs that were affected by this problem to allow them to mount on ubuntu 8.10.